A wide-angle X-ray study of the development of molecular orientation in crosslinked natural rubber

Molecular orientation parameters have been measured for the non-crystalline component of crosslinked natural rubber samples deformed in uniaxial tension as a function of the extension ratio and of temperature. The orientation parapeters 〈P₂(cosα)〉 and 〈P₄(cosα)〉 were obtained by an analysis of the anisotropy of the wide-angle X-ray scattering functions. For the measurements made at high temperatures the level of crystallinity detected was negligible and the orientation-strain behaviour could be compared directly with the predictions of molecular models of rubber elasticity. The molecular orientation behaviour with strain was found to be at variance with the estimates of the affine model particularly at low and moderate strains. Extension of the crosslinked rubber at room temperature led to strain-crystallization and measurements of both the molecular orientation of the non-crystalline chains and the degree of crystallinity during extension and relaxation enabled the role of the crystallites in the deformation process to be considered in detail. The intrinsic birefringence of the non-crystalline component was estimated, through the use of the 〈P₂(cosα)〉 values obtained from X-ray scattering measurements, to be 0.20±0.02.     

Medical students using Grateful Med: analysis of failed searches and a six-month follow-up study.

Medical students at the University of Missouri were taught to search MEDLINE using the Grateful Med software. The traffic files of student searches were analyzed for search behavior. This paper reports on two specific aspects of these analyses: (1) failed searches where retrieval was either too large or too small (zero hits); and (2) a six month follow-up study which focused on error rates and retention of skills. The two major reasons for retrieving too many citations were entering a phrase on a single subject line and a search of only one concept. Of the zero hit searches, the most commonly occurring errors were MeSH (medical subject headings) not used, other MeSH errors, misspelling or keyboard errors, and faulty logic. During the six month follow-up study, the error rates of students declined in spite of the fact that they had not used the software in six months. Furthermore, a larger percentage of the searches showed a more sophisticated use of MeSH than previously employed.     

Variation in glycoalkaloid concentration of potato tubers harvested from mature plants

Individual tubers from mature plants of cultivars Pentland Dell and Estima were harvested from experimental plots in two successive years and analysed for α‐solanine, α‐chaconine and total glycoalkaloid concentration (α‐solanine and α‐chaconine combined) using high‐performance liquid chromatography. Mean tuber glycoalkaloid concentration per plant was strongly affected by genotype and was much higher in plants of Pentland Dell (10.0 and 16.3 mg per 100 g fresh weight in 1994 and 1995, respectively) than Estima (4.0 and 4.3 mg per 100 g fresh weight in 1994 and 1995, respectively). The variation between plants in mean tuber glycoalkaloid concentration, expressed as coefficient of variation, was similar for the two cultivars in both years. Variation within plants was higher for cultivar Pentland Dell than Estima for both years but it was statistically significant only in 1995. Tuber position within a plant had no effect on glycoalkaloid concentrations in tubers of similar size. An inverse relationship between total glycoalkaloid concentration and tuber fresh weight of individual tubers was found for both cultivars and small tubers of Pentland Dell (20–40 g fresh weight) exceeded the safety limit of 20 mg per 100 g fresh weight. The pattern of glycoalkaloid accumulation differed between genotypes and appeared related to tuber growth. The implications of these results in terms of food safety are discussed. © 1999 Society of Chemical Industry     

Structural and functional properties of full-length and truncated human proapolipoprotein AI expressed in escherichia coli

Utilizing the Escherichia coli/pGex vector expression system incorporating a thrombin cleavage site, full-length (residues -6-243) and truncated forms of proapolipoprotein AI (proapoAI), terminating at amino acid residues 222, 210, 150, and 135, were purified to levels of at least 5 mg/L, after thrombin cleavage. Assessed by circular dichroism, the helical contents of L-alpha-dimyristoylphosphatidylcholine-associated forms of human plasma-derived apolipoprotein AI (apoAI) and recombinant proapoAI were comparable, being 69% and 65%, respectively. Circular dichroism measurements of the lipid-associated complexes of the truncated forms showed that between the sequence of residues 150-222 no additional helicity was gained until the carboxyl-terminal sequence was present in the molecule, indicating that the carboxyl terminus of the protein is required for the formation of helix within this central region. While tryptophan residues were more than 86% accessible, as assessed by iodide quenching, in the two truncated forms, proapoAI-6-135 and proapoAI-6-150, for both free and complexed protein, this figure fell to about 50% for full-length recombinant proapoAI, further indicating the influence of the carboxyl terminus on the structure of the whole protein. While cross-linking human plasma apoAI in solution with dithiobis-(succinimidyl propionate) revealed high molecular weight oligomers by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, recombinant proapoAI did not strongly form complexes larger than trimers. None of the truncated proapoAI molecules formed oligomers larger than trimers. The shortest form, proapoAI-6-135, only dimerized. Initial results from lecithin:cholesterol acyltransferase activation (apoAI peptide concentration 0.2 microM) indicated that truncation of the 21 carboxy-terminal amino acids resulted in a drop of approximately 53% in activation and 33 residues a drop of 67% relative to the full-length protein. Overall these results indicate the important influence of the carboxyl terminus on the structure of apoAI.     

Factors Influencing the Adhesion of Microorganisms to Surfaces

Starvation, growth phase, and carbon source influenced bacterial cell surface hydrophobicity. Both the number and kind of microorganisms that colonized metal surfaces depended on the type of metal and the presence of an imposed electrical potential. No significant differences in attachment and growth of a pure culture were observed when metal surfaces were dipped in an exogenous energy source. The chemical composition of naturally occurring adsorbed organic films on metal surfaces was shown to be independent of surface composition and polarization.     

Nanocolumnar Preferentially Oriented PSZT Thin Films Deposited on Thermally Grown Silicon Dioxide

We report the first instance of deposition of preferentially oriented, nanocrystalline, and nanocolumnar strontium-doped lead zirconate titanate (PSZT) ferroelectric thin films directly on thermal silicon dioxide. No intermediate seed or activation layers were used between PSZT and silicon dioxide. The deposited thin films have been characterised using a combination of diffraction and microscopy techniques.     

Effect of a coalescing aid on the earliest stages of polymer diffusion in poly(butyl acrylate-co-methyl methacrylate) latex films

In this article we use fluorescence resonance energy transfer (FRET) to investigate how a classic coalescing aid, such as 2,2,4-trimethyl-1,3-pentanediol monoisobutyrate (Texanol?) (TX), acts on the earliest stages of polymer diffusion as the latex film is still drying. In our approach, we temporarily arrest the drying process of a partially wet latex film by sealing it in an airtight chamber previously cooled to near the latex T_g. At these conditions, we are able to effectively stop the drying process and the polymer diffusion. FRET measurements at various locations on such a sample provide us information about the mechanism operating at the initial stages of polymer diffusion as the latex film is still drying. We complete our study with FRET measurements carried out at longer aging times on predried latex films. We analyze our diffusion data in terms of free volume theory and propose a mechanism that can account for the results obtained.     

Microstructure and texture of hydrated cement-based materials: A proton field cycling relaxometry approach

We show how the measurement of proton nuclear magnetic spin-lattice relaxation as a function of magnetic field strength (and hence nuclear Larmor frequency) can provide reliable information on the microstructure (specific surface area and pore size distribution) throughout the progressive hydration of cement-based materials. We present in details the experimental and theoretical characteristic features of the relaxation dispersion to support an interpretation in terms of coupled solid-liquid relaxation at pore interfaces, surface diffusion, and nuclear paramagnetic relaxation. The measurement does not require any drying temperature modification and is sufficiently fast to be applied continuously during the progressive hydration of the material. Coupling this method with the standard proton nuclear spin relaxation and high resolution NMR allows us to follow the development of micro-scale texture within the material.     

Correction to: Herd concentration areas create greenhouse gas hotspots

Nutrient Cycling in Agroecosystems -     

Recycling carbon fiber composites using microwave irradiation: Reinforcement study of the recycled fiber in new composites

With increasing use of carbon fiber reinforced polymer (CFRP) composites in transportation, sports, and many other industries, recycling of the scrap and end‐of‐life composites has presented both great challenges and opportunities. In this work, we report our study on reclaiming carbon fibers from CFRP using energy efficient microwave irradiation. Different irradiation conditions were used and the optimal conditions were determined based on the surface morphology of the recycled fiber. Polypropylene (PP) and Nylon, representing nonpolar and polar polymers, respectively, were reinforced using the recycled fiber through extrusion and injection molding. For comparison, PP and Nylon reinforced by virgin carbon fiber were also prepared using the same processing conditions. Tensile, flexural, and impact test results showed that, while both carbon fibers could improve these properties, they exhibited different reinforcing effects on the two polymers. The recycled fiber outperformed the virgin fiber in reinforcing PP whereas the virgin fiber performed better in Nylon. This was due to the differences in surface roughness, surface bonding, and fiber aspect ratio between the two fibers. This study shows the great potential of recycled carbon fiber and microwave irradiation as an effective recycling technique. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42658.