Solution Property and Irradiation Effect of Random Copolypeptides Composed of Ala and Pro Residues

Summary Poly(proline) and random copolypeptide composed of Pro and Ala residues were synthesized, and their solution properties and molecular conformation were investigated. Aqueous solutions of the polypeptide were irradiated with γ-rays above the transition temperature. It was shown that the transition temperature of the aqueous solution of the copolypeptide is influenced by Ala-residue content and γ-ray irradiation.     

A facile approach to the fabrication of ultrathin polymer films and application to optical lenses

A facile approach to the fabrication of ultrathin polymer films on a flat or curved substrate is presented. Polymers with unsaturated pendant groups were spin-coated on a photoinitiator tethered surface, which was then photoirradiated and washed with a solvent. The obtained films were uniform, smooth (R_a < 0.2 nm) and exhibited robustness toward solvents. The thickness of the films was determined by the molecular weight of the coated polymer and was not dependent on the initial spin-coated thickness. A mechanism for the formation of the ultrathin film and application to optical lenses is presented.     

First-Principles Study on the Grain Boundary Embrittlement of Metals by Solute Segregation: Part II. Metal (Fe,Al, Cu)-Hydrogen (H) Systems

The microscopic mechanism of grain boundary (GB) embrittlement in metals by hydrogen segregation (trapping) has been not well understood for many years. From first-principles calculations, we show here that the calculated cohesive energy of bcc Fe Σ3(111) and fcc Al(Cu) Σ5(012) symmetrical tilt GBs can be significantly reduced if many hydrogen atoms segregate at the GBs. This indicates that the reduction of the cohesive energy of the GB may cause the hydrogen-induced GB embrittlement in Fe, Al, and Cu. Considering the “mobile” effect of hydrogen during fracture, especially for the Fe system, more hydrogen atoms coming from solid solution state can segregate on the gradually formed two fracture surfaces and reduce further the cohesive energy. We suggest a new idea about the upper and lower critical stresses observed in the constant-load test of hydrogen-induced delayed fracture in high-strength steels; the upper critical stress is determined by the amount (density) of “immobile” hydrogen atoms segregated at the GB before fracture, and the lower critical stress is determined by the total amount (density) of immobile and mobile hydrogen atoms, the latter of which segregate on the two fracture surfaces during fracture.     

Magnetic properties of metal layer deposited by reduction of metal ions contained in polymer with applying magnetic field

Metal layer was deposited by the reduction of NiCl₂ and CoCl₂ in polyacrylonitrile film after applying an external magnetic field in directions parallel and perpendicular to the surface of the film; the magnetic properties of the metal-deposited film were investigated. When the parallel magnetic field was applied, the values of coercivity (H_c), remanent flux density (B_r) and maximum flux density (B_s) increased regardless of the composition of the metal ions, compared with the case without the application of the magnetic field. From the scanning electron micrographs and X-ray diffraction analyses, it was shown that the growth of crystalline orientation in the deposited metals was enhanced by applying a parallel magnetic field.     

New measurement of particle size distribution by a buoyancy weighing-bar method

The rates which particles from JIS Test Powders 1, Class 2 (silica sand), Class 3 (silica sand), Class 16 (calcium carbonate, heavy), and JIS Test Powder 2, Class GBM-20 (barium titanate glass) settled out of homogenous suspensions were determined using the principles of the buoyancy weighing-bar method as well as a sedimentation balance. Samples were standardized by Japanese Industrial Standard, and the dispersing agent was NaPP or NaHMP, while the viscosity improver was a starch syrup solution. Although constructing a handmade sedimentation balance is difficult, developing a handmade weighing tool capable of measuring particle size distribution is easy. Herein three weighing-bars, which were composed of aluminum, stainless steel, and copper, were used to measure the particle size distribution. However, an aluminum slit-cylinder occasionally replaced the weighing-bars. The weighing data obtained via an analytical balance were controlled by connecting the balance to a personal computer with an RS-232C interface, and the determined particle size agreed well with the data obtained by Andreasen analyses and the sedimentation balance.     

Safety Analysis of ITER EDA Design by GEMSAFE

General Methodology of Safety Analysis and Evaluation for Fusion Systems (GEMSAFE) was applied to the International Thermonuclear Experimental Reactor (ITER) design in the stage of Engineering Design Activities (EDA) to identify Design Basis Events (DBEs) and the related safety features, which were compared with those of the ITER design in the stage of Conceptual Design Activities (CDA). As a result, 18 DBEs for the EDA design were selected in comparison with 25 DBEs for the CDA design. DBEs related to the fuel area were categorized in higher event category than those of the CDA design due to the increase of the mobile tritium contained in some components. It was necessary to reduce the inventory of the tritium absorbed in the tokamak dust in the EDA design as well as in the CDA design. Some measures were recommended to reduce mobile tritium dissolved in the coolant in the single cooling loop due to the increase of this estimated inventory.     

An asymmetric Y-branching circuit using total reflectionfor semiconductor integrated optical circuits

A new structure for a compact optical branching circuit is proposed. An asymmetric Y-branching circuit using total reflection is fabricated on an AlGaAs/GaAs wafer. Good branching operation is observed in a single-mode branching circuit with a branching angle of 45°. The exact origins of loss in the branching circuit are also clarified     

Dislocation reduction in gaas grown on Si by MOMBE using multiple indium atomic plane structures

This paper investigates the effectiveness of multiple indium atomic planes in reducing the dislocation density in GaAs epitaxial layers grown by metalorganic molecular beam epitaxy on GaAs-coated Si substrates prepared by metalorganic chemical vapor deposition.In situ reflection high-energy electron diffraction patterns show that, during the growth of multiple indium atomic-plane structures, two-dimensional growth takes place. Cross-sectional transmission electron microscope observation shows that InAs sublayers are commensurate; hence the critical thickness of the InAs layer in this structure is more than one-monolayer. Cathodoluminescence examination indicates that the defect density decreases as the number (<60) of indium atomic planes increases. This new structure is more effective in dislocation reduction than conventional In_0.1Ga_0.9As/GaAs strained-layer superlattices.     

Demulsification of o/w emulsion and subsequent water treatment using powder adsorbent

Demulsification of stable oil-in-water emulsion was studied using powder adsorbent. Among various adsorbents tested, activated carbon was found to be the most efficient regardless of the type of surfactants used. The more dose of activated carbon for the demulsification was required, the higher concentration of the surfactant as well as the larger amount of oil and the bigger size of the lipophilic and hydrophilic groups. Empirical equations were obtained to correlate the dose of activated carbon to the residual concentration of oil as a function of the initial concentration of surfactant.