High Hardness and Ductile Mosaic SiC/SiO2 Composite by Spark Plasma Sintering

SiC powder was coated with SiO₂ layer by chemical vapor deposition, and the SiC(core)/SiO₂(shell) composite powder was consolidated to a SiC/SiO₂ composite with a mosaic microstructure by spark plasma sintering (SPS) at 1923 K for 1.8 ks. The SiC(core)/SiO₂(shell) powder with a 80–100 nm thick SiO₂ layer resulted in a SiC/SiO₂ composite with a relative density of 97% and hardness and fracture toughness of 17.1 GPa and 8.4 MPa m^1/2, respectively.     

Textile‐surface interfacial asymmetric polymerization

This research demonstrated that polymerization of aniline on cellulose produces chiroptically active composites. Polymerization of aniline in the presence of cotton fibers consisting of chiral cellulose are performed to prepare a polyaniline (PANI)/cotton composite. The polymerization is conducted at the cotton interface. The resultant PANI/cotton composite shows chiroptical activity elucidated with diffuse reflectance circular dichroism. In this reaction, textile‐surface interfacial asymmetric polymerization is performed with imprinting of chiral structure from the cotton as a natural chiroptically active polymer to the PANI. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41118.     

Numerical analysis of a dual refluxed PSA process during simultaneous removal and concentration of carbon dioxide dilute gas from air

The simultaneous removal and concentration of carbon dioxide present in ambient air were carried out by a dual refluxed Pressure Swing Adsorption (PSA) process with intermediate feed inlet position. The feed inlet position divides each column into rectifying and stripping sections from which enriched and lean gases can be simultaneously produced. A simple isothermal model with negligible axial dispersion and pressure drops through the PSA beds was developed to investigate the effects of various combinations of the operating variables and to analyze semi-quantitatively the effects of the main characteristic parameters such as the dimensionless feed inlet position (Z_R/L_T) and the stripping-reflux ratio (R_r). A good agreement between the model prediction and the experimental results was obtained. Moreover, an optimum feed inlet position was found and it corresponded to a position where the carbon dioxide mole ratio in the feed flux and that in the upstream flux leaving the stripping section were equal. The carbon dioxide mole ratio in the enriched product (Y_E) as well as that in the lean product (Y_L) were strongly dependent on the ratio of feed/enriched product flow rates (Q_F/Q_E) and the ratio of feed/lean product flow rates (Q_F/Q_L). Although the pressure ratio (P_a/P_d) was crucially important for the separation performance, a smaller value of R_r was sufficient to reach a performance which is unattainable in conventional PSA processes.     

Supercritical CO2 extraction of essential oils and cuticular waxes from peppermint leaves

Essential oils and cuticular waxes were extracted from peppermint leaves with supercritical carbon dioxide in a semicontinuous-flow extractor. The effects of CO₂ flow rate and pressure on the extraction rate were studied within the flow rate range of (4·1–9·8) × 10⁻⁵ kg s⁻¹ and the pressure range of 10–30 MPa. Flow rate effect indicated that the intraparticle diffusion resistance was not dominant in this process. The extraction rate of cuticular waxes increased remarkably with the pressure, whereas that of essential oils was almost constant as compared with cuticular waxes. The concentration of cuticular waxes at the exit of the extractor was close to the solubility of triacontane while that of essential oils was much lower than the solubility of 1-menthol.     

Immobilization of alkaline phosphatase on magnetic particles by site-specific and covalent cross-linking catalyzed by microbial transglutaminase

Bacterial alkaline phosphatase (BAP) was site-specifically and covalently immobilized on magnetic particles (MPs) using the enzymatic reaction of microbial transglutaminase (MTG). Immobilization efficiency was affected by the chemical surface treatment of MPs and immobilized BAP exhibited more than 90% of the initial activity after 10 rounds of recycling.     

Detection of Leuconostoc strains at a meat processing plant using polymerase chain reaction

To simplify the labor-intensive conventional routine testing of samples to detect Leuconostoc at a meat processing plant, we developed polymerase chain reaction (PCR) primers specific for Leuconostoc from 16S rRNA gene sequences. These primers did not detect other common lactic acid bacteria such as Lactobacillus plantarum, Lact. sake, Lact. fermentum, Lact. acidophilus and Weissella viridescens. PCR with this primer detected all Leuconostoc species tested (Leu. mesenteroides subsp. mesenteroides, Leu. pseudomesenteroides, Leu. carnosum, Leu. lactic, Leu. citreum, Leu. amelibiosum, Leu. gelidum), except for Leu. fallax, and no other lactic acid bacteria on agarose gel electrophoresis. The method could identify areas contaminated with Leuconostoc in a large-scale industrial meat processing plant. Of 69 samples analyzed, 34 were positive for Leuconostoc according to the conventional culture method (isolation of LAB producing dextran) and PCR, whereas 29 were negative according to both. Six samples were culture-negative but positive by PCR. No false negative results were generated by PCR. The method is rapid and simple, is useful for routinely monitoring areas contaminated with Leuconostoc in meat processing plants, and could help to prevent the spoilage of meat products.     

Determination of Ethyl Carbamate in Sake Using Headspace Solid Phase Microextraction

An analytical method for the determination of ethyl carbamate in alcoholic beverages has been developed and optimized. A combination of headspace solid phase microextraction (HS‐SPME), as the extraction technique, and GC/MS, as the determination technique, was utilized. Analytical grade ethyl carbamate dissolved in ethanol solution was analyzed to determine the optimum analytical conditions. Ethyl carbamate‐d₅ was added as an internal standard. The following HS‐SPME conditions were investigated: type of stationary phase of the fibre, ethanol content, sample volume and extraction time. The optimized procedure showed that the detection limit, relative standard deviation, and recovery were 6.7 μg/L, 0.4–2.0%, and 103.6–107.6%, respectively. The precision of this new method was equivalent to previous analyses. Finally, the developed method was applied to the analysis of ethyl carbamate in sake.     

Mass transfer and holdup in gas-liquid cocurrent flow packed beds containing water-repellent particles

Water-repellent particles were prepared by spraying polytetrafluoroethylene (PTFE) on activated carbon. Gas-liquid volumetric mass transfer coefficient and holdup were determined in gas-liquid cocurrent upflow and downflow packed beds from the measurements of gas desorption and volume, respectively. As the PTFE loading increased, the gas-liquid volumetric mass transfer coefficients in both upflow and downflow modes were enhanced. Gas holdup in the upflow mode increased with the PTFE loading, while the dynamic liquid holdup in the downflow mode decreased. The enhancement of the mass transfer rate from gas to liquid can be explained by the effect of water-repellency on the surface of activated carbon.     

High-Temperature Active Oxidation of Chemically Vapor-Deposited Silicon Carbide in CO─CO2 Atmosphere

Active oxidation behavior of CVD-SiC in CO─CO₂ atmospheres was investigated using a thermogravimetric technique in the temperature range between 1823 and 1923 K. The gas pressure ratio, P _CO2/ P _CO, was controlled between 10⁻⁴ and 10⁻¹ at 0.1 MPa. Active oxidation rates (mass loss rates) showed maxima at a certain value of P _CO2/ P _CO, ( P _CO2/ P _CO )^*, In a P _CO2/ P _CO region lower than the ( P _CO2/ P _CO)^* a carbon layer was formed on the SiC surface. In a P _CO2/ P _CO region higher than the ( P _CO2/ P _CO)^*, silica particles or a porous silica layer was observed on the SiC surface.