Synthesis and activation of Pt nanoparticles with controlled size for fuel cell electrocatalysts

Well-dispersed Pt nanoparticles with controlled size and narrow size distribution were prepared by polyalcohol reduction of platinum acetylacetonate, using oleylamine as a capping agent. The particle size was varied from 3.5 nm to 11.5 nm by decreasing the amount of oleylamine added in the synthesis. Size selection of the as-prepared particles by solvent fractionation yielded nearly monodispersed Pt particles. The as-prepared particles were loaded on a carbon support by physical deposition, but showed no electrocatalytic activity due to the oleylamine bound to the particle surface. The particles were activated for electrocatalysis after heating the particles in air at 185 °C for 5 h, conditions that gave no particle-sintering and no oxidation. Cyclic voltammetry showed that the particles after the heat treatment in air were electrocatalytically active for methanol oxidation. The smaller 3.5 nm and 4.0 nm Pt particles had a higher intrinsic activity for methanol oxidation, but a lower tolerance to CO poisoning, compared with 6.0 nm, 9.5 nm and 11.5 nm particles. CO-stripping results suggest that CO is more easily oxidized on larger Pt particles.     

A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

Comments on “Equivalence of characterizations of fixed models”

In this note we present a proof to the conjecture given in the above paper, and therefore establish the equivalence of characterizations of fixed modes for the general case.     

Call admission control schemes under generalized processor sharing scheduling

Provision of Quality‐of‐Service (QoS) guarantees is an important and challenging issue in the design of integrated‐services packet networks. Call admission control is an integral part of the challenge and is closely related to other aspects of networks such as service models, scheduling disciplines, traffic characterization and QoS specification. In this paper we provide a theoretical framework within which call admission control schemes with multiple statistical QoS guarantees can be constructed for the Generalized Processor Sharing (GPS) scheduling discipline. Using this framework, we present several admission control schemes for both session‐based and class‐based service models. The theoretical framework is based on recent results in the statistical analysis of the GPS scheduling discipline and the theory of effective bandwidths. Both optimal schemes and suboptimal schemes requiring less computational effort are studied under these service models. The QoS metric considered is loss probability. This revised version was published online in June 2006 with corrections to the Cover Date.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.     

Bryostatin 1 induces ubiquitin COOH-terminal hydrolase in acute lymphoblastic leukemia cells

It has been previously reported that Bryostatin 1 (Bryo1) induces differentiation of the human acute lymphoblastic leukemia (ALL) cell line, Reh, to a monocytoid B-cell stage. In this study we demonstrate that a novel protein, ubiquitin COOH-terminal hydrolase (UCH-L1), is associated with this differentiation. Reh cells were treated with 200 nmol/l of Bryo1 for 72 h and analyzed for changes in morphology, surface immunophenotype, acid phosphatase and terminal deoxynucleotidyl transferase. Protein patterns of the parent and differentiated cells, by two-dimensional polyacrylamide gel electrophoresis (2D PAGE), were studied. Bryo1-treated cells expressed morphologic, phenotypic and enzymatic features of the monocytoid B-cell stage. The UCH-L1 enzyme (MW-pl 34-5.3) was detected by 2 D PAGE in the differentiated, but not in parent cells. The presence of UCH-L1 in the Bryo1-treated cells was further confirmed by immunoblotting of 2 D PAGE using UCH-L1 polyclonal antibody. Ubiquitin expression was studied in parent and Bryo1-treated cells and was compared with 12-O-tetradecanoylphorbol-13-acetate (TPA)-treated cells. Both agents, TPA and Bryo1, increased the level of ubiquitin expression as detected by flow cytometry. Sodium borohydride, an inhibitor of UCH-L1, inhibited the Bryo1-induced differentiating effect on Reh cells. To date, the mechanism by which Bryo1, exerts its B-cell differentiating effect is not fully understood. This study shows that UCH-L1 expression may play a major role in Bryo1-induced differentiation in pre-B-ALL.     

Progress and prospects of group-III nitride semiconductors

We review recent progress in the group-III nitride and related materials, and electronic and optical devices based on them. Blue and UV (e.g. ultra violet) emitters and detectors, and high temperature/high power electronics which has long been coveted are beginning to be realized either in the laboratory or in the commercial arena, due in part to the breathtaking progress made in the last few years in the art and science of GaN, InN, AlN and their salloys. With brief references to the historical aspect of the relevant developments, this review concerns itself primarily with the current status of wide bandgap gallium nitride and related semiconductors from both the materials and devices points of view. Following a discussion of the structural properties of these materials, their electrical and optical properties are described in detail. The available data on metal contacts, the properties of which are indeed very conducive for the devices mentioned, from the points of view of ohmic contacts and Schottky barriers, are elaborated on. Recent progress on processing issues such as etching are reviewed. The review then embarks on an indash;depth discussion and analysis of field effect transistors, bipolar transistors, light emitting diodes, laser and photo detectors.     

Investigation of Scale Formation in Heat Exchangers of Phosphoric Acid Evaporator Plants

The primary problem in concentrating phosphoric acid is due to fouling on the tube‐side of the heat exchangers of the evaporator units. Scaling on the heat transfer surfaces occurs because of high supersaturation of phosphoric acid liquor with respect to calcium sulphate. A review of the existing literature reveals that no information is available on heat transfer and on crystallization fouling of industrial phosphoric acid solutions. In this investigation, the solubility of different calcium sulphate types in phosphoric acid solution was studied and its dependency on acid concentration and temperature was investigated. A large number of fouling experiments were carried out in a side‐stream of a phosphoric acid plant at different flow velocities, surface temperatures and concentrations to determine the mechanisms, which control the deposition process. After identifying the effects of operational parameters on the deposition process, a model was developed for prediction of fouling resistances. The reaction of calcium sulphate crystallization followed a second order rate with respect to the supersaturation. The activation energy evaluated for the surface reaction of the deposit formation was found to be 57 kJ/mol. The predicted fouling resistances were compared with the experimental data. Quantitative and qualitative agreement between measured and predicted fouling rates is good.     

Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation

A series of polyurethane microcapsules containing a phase change material (PCM) of n‐octadecane was successfully synthesized by an interfacial polymerization in aqueous styrene‐maleic anhydride (SMA) dispersion with diethylene triamine (DETA) as a chain extender reacting with toluene‐2,4‐diisocyanate (TDI). The average diameter of microPCMs is in the range of 5–10 μm under the stirring speed of 3000–4000 rpm. Optical and SEM morphologies of microPCMs had ensured that the shell was regularly fabricated with the influence of SMA. FTIR results confirmed that the shell material was polyurethane and the SMA chains associated on core material reacted with TDI forming a part of shell material. The shell thickness was decreasing in the range of 0.31–0.55 μm with the molar ratio of DETA/TDI from 0.84 to 1.35 and the weight of core material increasing from 40 to 80% (wt %). By controlling the weight ratio of PCM as 40, 50, 60, 70, and 80% in microPCMs, it was found using DSC that the T_m and T_c of microPCMs were in the range of 29.8–31.0^oC and 21.1–22.0°C and an obvious phase change had been achieved nearly the same temperature range of that of PCM. The results from release curves of microPCM samples prepared by 1.4, 1.7, and 2.0 g of SMA indicated the release properties were affected by the amount of the dispersant, which attributed to the emulsion effect and shell polymerization structure. The above results suggest that the shell structure of microPCMs can be controlled and the properties of microPCMs determined by shell will perform proper practical usage. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4996–5006, 2006