Design of an airlift loop bioreactor and pilot scales studies with fluidic oscillator induced microbubbles for growth of a microalgae Dunaliella salina

This study was conducted to test the feasibility of growing microalgae on steel plant exhaust gas, generated from the combustion of offgases from steel processing, which has a high CO₂ content. Two field trials of batch algal biomass growth, mediated by microbubble transfer processes in an airlift loop bioreactor showed only steady growth of biomass with 100% survival rate. The gas analysis of CO₂ uptake in the 2200 L bioreactor showed a specific uptake rate of 0.1 g/L/h, an average 14% of the CO₂ available in the exhaust gas with a 23% composition of CO₂. This uptake led to a steady production of chlorophyll and total lipid constituency in the bioreactor, and an accelerating exponential growth rate of biomass, with a top doubling time of 1.8 days. The gas analysis also showed anti-correlation of CO₂ uptake and O₂ production, which along with the apparent stripping of the O₂ to the equilibrium level by the microbubbles, strongly suggests that the bioreactor is not mass transfer limited, nor O₂ inhibited. Removing O₂ inhibition results in high growth rates and high density of biomass.     

Synthesis and mechanical properties of new fibre-reinforced composites of inorganic polymers with natural wool fibres

New fibre-reinforced composites of aluminosilicate inorganic polymer (geopolymer) with natural protein-based fibres (carpet and Merino wool) were developed, and their mechanical properties determined. The surfaces of some of the wool fibres used in this study were chemically modified to improve their alkali resistance and reinforcing properties. The flexural strengths and failure characteristics of the composites, determined on bar-shaped samples by a three-point test method, show an approximately 40 % improvement over the unreinforced matrix and graceful failure, unlike the unreinforced matrix that displays ceramic-like brittle fracture. Interaction between the sulphide linkages of the wool and the aluminosilicate matrix produces a blue-green colour in the wool, shown by UV–visible and IR spectroscopy to be related to the formation of the sulpho-aluminosilicate compound sodalite. The thermal behaviour of these composites was studied by thermogravimetric analysis, and scanning electron microscopy was used to study the fibre-matrix interface.     

Effects of Previous Gutting on Biochemical Changes and Profile of Long‐Chain Polyunsaturated Fatty Acids in Cold‐Smoked Kutum (Rutilus frisii kutum) Stored at Room Temperature (25 ± 2C)

Previous gutting was applied to fresh kutum (Rutilus frissi kutum) to study the effects of cold smoking on the changes of rancidity and fatty acid (FA) content of the gutted and ungutted smoked kutum stored at room temperature (25 ± 2C) for 60 days. To do so, proximate (protein, ash, moisture and lipid), chemical (peroxide value [PV], thiobarbituric acid‐index [TBA‐i], total volatile basic nitrogen [TVB‐N] and FA profile) and pH analyses were carried out. The ungutting of kutum before smoking resulted in a higher degree of bacterial spoilage and oxidation during storage at room temperature, based on the results obtained from PV, TBA‐i, TVB‐N and FA content analyses. Moreover, pH as a critical factor on food spoilage showed a less decrease in smoked ungutted kutum during the 60‐day storage. It is concluded that the gutting of kutum before cold smoking is recommended as a pretreatment for storage at room temperature.     

Miscibility study of chitosan/polyethylene glycol fumarate blends in dilute solutions

Solution miscibility of chitosan/polyethylene glycol fumarate blends dissolved in acetate buffer solution was investigated in different blend compositions by viscosity, density, and refractive index measurement techniques at 30, 40, and 50°C. In order to quantify the miscibility of the polymer pair, degree of miscibility was studied by means of two criteria known as interaction parameters i.e., μ and α. On the basis of the sign convention involved in these criteria, these values revealed that the blend solution was miscible when the chitosan content was more than 80% (w/w) of the composition. The results were confirmed by density, and refractive index measurements. Furthermore, the results showed that the miscibility window of chitosan/polyethylene glycol fumarate blends was independent with respect to the changes in solution temperature. Therefore, these results suggested due to intermolecular hydrogen‐bonding interaction between amino and hydroxy groups of chitosan and hydroxy groups of polyethylene glycol fumarate which play an important role in the formation of miscible phase. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Thermal conductivity prediction of foods by Neural Network and Fuzzy (ANFIS) modeling techniques

A neuro-fuzzy modeling technique was used to predict the effective of thermal conductivity of various fruits and vegetables. A total of 676 data point was used to develop the neuro-fuzzy model considering the inputs as the fraction of water content, temperature and apparent porosity of food materials. The complexity of the data set which incorporates wide ranges of temperature (including those below freezing points) made it difficult for the data to be predicted by normal analytical and conventional models. However the adaptive neuro-fuzzy model (ANFIS) was able to predict conductivity values which closely matched the experimental values by providing lowest mean square error compared to multivariable regression and conventional artificial neural network (ANN) models. This method also alleviates the problem of determining the hidden structure of the neural network layer by trial and error.     

Polyaniline-supported acid as an efficient and reusable catalyst for a one-pot synthesis of β-acetamido ketones via a four-component condensation reaction

Polyaniline-supported acid salts such as polyaniline-hydrochloride, polyaniline-sulfate and polyaniline-nitrate were prepared by oxidation of aniline using ammonium persulfate as oxidizing agents. Polyaniline salts were used as catalyst for the preparation of β-acetamido ketones. Polyaniline-sulfate salt was found to be the best catalyst for the preparation of β-acetamido ketones. Present methodology offers several advantages, such as cheaper process, easy synthesis of stable catalyst, simple work-up procedure, and excellent activity with less amount of catalyst and in addition, the catalyst can be easily recovered after completion of the reaction and reusable without affecting its activity.     

Mathematical analysis of a disease transmission model with quarantine,isolation and an imperfect vaccine

A new mathematical model for the transmission dynamics of a disease subject to the quarantine (of latent cases) and isolation (of symptomatic cases) and an imperfect vaccine is designed and analyzed. The model undergoes a backward bifurcation, where a stable disease-free equilibrium co-exists with a stable endemic equilibrium when the associated reproduction threshold is less than unity. It is shown that the backward bifurcation phenomenon can be removed if the vaccine is perfect or if mass action incidence, instead of standard incidence, is used in the model formulation. Further, the model has a unique endemic equilibrium when the threshold quantity exceeds unity. A nonlinear Lyapunov function, of the Goh–Volterra type, is used to show that the endemic equilibrium is globally-asymptotically stable for a special case. Numerical simulations of the model show that the singular use of a quarantine/isolation strategy may lead to the effective disease control (or elimination) if its effectiveness level is at least moderately high enough. The combined use of the quarantine/isolation strategy with a vaccination strategy will eliminate the disease, even for the low efficacy level of the universal strategy considered in this study. It is further shown that the imperfect vaccine could induce a positive or negative population-level impact depending on the size (or sign) of a certain associated epidemiological threshold.     

Turbulent Heat Transfer Analysis of a Three-Dimensional Array of Perforated Fins Due to Changes in Perforation Sizes

The quasi stationary-state solution of the two-dimensional Rosenthal equation for a moving heat source using the meshless element free Galerkin method is studied in this article. Node-based moving least square approximants are used to approximate the temperature field. Essential boundary conditions are enforced by using Lagrange multipliers. A Gaussian surface heat source is used for the modeling of the moving heat source. The results obtained for a two-dimensional model are compared with the results of the finite-element method.