Oxygen Reduction Electrode Properties of Manganese Oxide Nanosheet-Based Materials

Two types of oxide nanosheet-based materials, H₃O⁺-form regularly stacked manganese oxide nanosheets (H₃O⁺-RG(Mn)) and H₃O⁺-form randomly restacked manganese oxide nanosheets (H₃O⁺-RE(Mn)) were synthesized by soft chemical methods, and their oxygen reduction reaction (ORR) activities were examined by cyclic voltammetry (CV) and semi-steady-state voltammetry (SSV) with a rotating ring-disc electrode at 70 °C in 0.1 M KOH. Both samples showed high onset potentials (E _on) of the ORR current and high efficiencies (Eff ₄) of the 4-electron reduction of oxygen, and E _on and Eff ₄ values were improved by electrochemical oxidation up to 1.2 V (vs. reversible hydrogen electrode) in the CV measurement prior to the SSV measurement. As a result, the nanosheet-based samples exhibited higher ORR activities than the starting materials, K⁺-form layered manganese oxide K_0.5MnO₂ (K⁺-RG(Mn)) and Mn₂O₃, and a well-known ORR catalyst, MnO₂. The H₃O⁺-RE(Mn) sample electrochemically oxidized up to 1.2 V showed the highest ORR activity, E _on = 0.97 V and Eff ₄ = 99%, which were comparable to those of a conventional 20 mass% Pt/C catalyst. The comparison of their ORR activities, BET surface areas and X-ray photoelectron spectra suggests that the enhancement of the ORR activity is attributed to an increase in the numbers of the ORR active sites and a large amount of H₂O in the interlayers and on the surface of the nanosheets because of rapid of H₂O-supply enough for ORR in alkaline solution.     

Preparation and photocatalytic activity of Keggin-ion tungstate and TiO2 hybrid layer-by-layer film composites

Keggin ions (PW₁₂O₄₀³⁻ (PW₁₂), SiW₁₂O₄₀⁴⁻ (SiW₁₂), H₂W₁₂O₄₀⁶⁻ (H₂W₁₂)) and TiO₂ hybrid thin films were prepared using the layer-by-layer method. Their photocatalytic activities were investigated using gaseous 2-propanol decomposition. All films were transparent in the visible wavelength range. For 2-propanol decomposition, H₂W₁₂ was the most effective for the combination with TiO₂ despite having the smallest TiO₂ deposition amount. The photocatalytic activity of the PW₁₂–TiO₂ hybrid film was increased 2.3 times by visible light with UV illumination. This increase was less remarkable for hybrid films of other Keggin ions, suggesting that the visible light excitation of reduced PW₁₂ plays an important role in the enhancement of 2-propanol decomposition.     

Direct dissimilar joining of aluminium alloys and polyamide 6 by friction lap joining*

Direct dissimilar joining of various Al alloy (A1050, A3004, A5052 and A5083) plates and a polyamide 6 plate was performed using friction lap joining (FLJ) with the Al alloy plate as a top and the polyamide 6 plate as a bottom. The effect of Mg content in Al alloys on the joining strength was investigated. TEM analysis made clear that the polyamide 6 and Al alloys were joined via oxide layer consisting of Al₂O₃ and MgO. The results of XPS analysis indicated that MgO was formed by the heating during FLJ, and the quantity of MgO was increased with increasing Mg content in Al alloys. The tensile shear strengths of A3004, A5052 and A5083 joints were saturated to about 2 kN because of the tensile fracture at the polyamide 6 plate outside the tool-passed zone, which were higher than that of the A1050 joint fractured at the joint interface. The peel strength of the joint was increased with increasing Mg content in Al alloys, and the fracture occurred both at the joint interface and at the polyamide 6 plate on the joint area. The fraction of polyamide 6 plate fracture was also increased with increasing Mg content in Al alloys.     

Reinforcement of polypropylene by cellulose microfibers modified with polydopamine and octadecylamine

Cellulose microfibers (CMFs) having surfaces modified with polydopamine (PDPA) and octadecylamine (ODA) were prepared, and their reinforcing abilities for polypropylene (PP) were investigated. The PDPA coating was made via self-polymerization of dopamine (P-CMF), and subsequent alkylation was conducted by the reaction with ODA (OP-CMF). The modified CMFs exhibited improved dispersibility in the PP matrix due to the reduced hydrophilicity. The OP-CMF/PP composite prepared by batch mixing had a higher tensile modulus compared to that for the pure PP and composites with unmodified CMFs. However, excess alkylation lowered the tensile modulus, and the presence of an optimal degree of alkylation was demonstrated. The CMF/PP-IM composites fabricated by injection molding exhibited improved tensile properties compared to those prepared by batch mixing. Both the tensile modulus and yield stress were increased by increasing the CMF content and improved by the surface modification of the CMFs.     

Pore Structure and Thermal Stability of Mesoporous Mullite Fibers Prepared by Crystallization and Selective Leaching of Al2O3-SiO2 Glass Fibers

Porous mullite fibers were prepared by crystallization and selective leaching of Al2O3-SiO2 glass fibers using buffered HF-NH4F(BHF) aqueous solutions. The optimum concentration of BHF solution for selective leaching of the fibers was 0.9 mass% HF and 17.0 mass% NH4F. By firing at 1000–1300°C, the glass fibers changed into composite texture of mullite and glassy phase. Since the pores in the fibers were formed by selective leaching of glassy phase among mullite grains, they were tunable by changing the firing conditions of fibers. Pore size of the samples changed from around 4 nm in the 1100°C fired sample to 16 and 40 nm in the 1200 and 1300°C fired samples, respectively. The highest specific surface area obtained was around 30 m2/g, when the fibers were heat treated at 1200°C for 24 h and leached for 20 h in 0.9 mass% HF-17.0 mass% NH4F solution. From the thermal stability tests of the porous mullite fibers, its specific surface area was found to be maintained up to 1200–1300°C.     

A simple screening procedure for heterotrophic nitrifying bacteria with oxygen-tolerant denitrification activity

Various naturally occurring strains of heterotrophic nitrifying bacteria were isolated by enrichment culture using acetamide as the C and N source, and 21 strains were identified as heterotrophic nitrifiers. Using a new simple procedure, these 21 strains were also investigated for the ability to carry out denitrifcation in the presence of oxygen. Several of the nitrifying strains were found to exhibit a distinct activity that allows for denitrifcation via nitrite (NO2-) in the presence of oxygen, indicating that they have an oxygen-tolerant denitrifcation system. A wide variety of bacteria possessing both nitrification and denitrifcation capabilities in the presence of oxygen were isolated and partially characterized by using the simple screening combinatorial procedure described in this paper.     

Solid electrolyte of tantalum oxide thin film deposited by reactive DC and RF magnetron sputtering for all-solid-state switchable mirror glass

All-solid-state switchable mirror glass was prepared by magnetron sputtering. The device exhibited the multi-layer structure of Mg₄Ni/Pd/Ta₂O₅ on WO₃/ITO/glass substrate. The Mg₄Ni, Pd, and Ta₂O₅ in the device acted as optical switches, proton injector and solid electrolyte, respectively. Reactive DC magnetron sputtering was employed as a new deposition method for Ta₂O₅ electrolyte thin film for the device. The transmittance of the device, at a wavelength of 670 nm using reactive DC-sputtered Ta₂O₅ thin film, reached 0.1% (a reflective state) to 48% (a transparent state). The transmittance change occurred in less than 40 s when 5 V was applied, and the switching speed was 60 times faster than that of the device using reactive RF-sputtered Ta₂O₅ thin film.     

Novel Er and Ce codoped fluoride fiber amplifier for low-noise and high-efficient operation with 980-nm pumping

We demonstrate the low-noise and high-gain operation of a fluoride Er/sup 3+/ and Ce/sup 3+/ codoped fiber (F-ECDF) amplifier with 980-nm pumping. A 980-nm-pumped F-ECDF with a length of only 45 cm exhibits a noise figure of <4.5 dB in the entire C-band and a small signal gain of >20 dB with a gain ripple of <1 dB without any gain-flattening filter in the 1525-1560-nm range. Excitation spectra for the gain and noise figure of an F-ECDF exhibit flat shapes in the 974-982-nm range. We also demonstrate that the gain coefficient reaches 1.4 dB/mW and the power conversion efficiency is 27.4% at 1532 nm for a 2.25-m-long F-ECDF.     

Temperature Estimation and Al Content Prediction Focusing on Microstructural Change in a Thermal Barrier Coating

A superalloy with a thermal barrier coating (TBC) simulating a gas turbine blade is exposed to a high-temperature environment to develop a method for predicting the local temperature and Al content in a bond coat (BC). The Al content decreases with an increase in the test time due to the Al transport induced by the oxidation of the BC and the interdiffusion between the BC and the substrate. This brings about Al-decreased layer (ADL) at the boundary between the BC and the top coat. The thickness of the ADL increases in proportion to the square root of the test time, and the temperature dependence of the growth rate shows an Arrhenius-type behavior. Based on this relation, the local temperature of an in-service blade can be estimated by measuring the ADL thickness when the operation time is known. The Al content decreases in proportion to the ADL thickness. The prediction method of the Al content based on the relation is also presented.