Tubular shaped composites made from polythiophene covalently linked to Prato functionalized N-doped carbon nanotubes

A simple methodology to produce tubular nitrogen-doped carbon nanotube/polythiophene covalently linked composites is described. Nitrogen doped carbon nanotubes (N-CNTs) were made by the floating catalyst CVD method using toluene, ferrocene and tetramethylethylenediamine (TMEDA) as reagents. Functionalization of the N-CNTs was achieved using 3-thiophenecarboxaldehyde and N-methylglycine in 1,2-dichlorobenzene (Prato reaction). Elemental analysis showed nitrogen incorporation of N into the N-CNTs (1.8%) and also the N-methylglycine functionalized N-CNTs (f-N-CNTs; 6.2%). A series of f-N-CNT/thiophene monomer mixtures (weight ratios 1:3, 1:10 and 1:20) were used to make f-N-CNT/polythiophene tubular composites. As the amount of thiophene monomer was increased, the overall diameter of the polymer layer attached onto the N-CNTs increased. Polymer thickness also varied with reaction time (1 h, 12 h and 24 h). The combination of acid functionalization and N–doping gives the best coverage of the CNTs by polythiophene, in which the polythiophene preferentially binds to the f-N-CNTs to give tubular structures.     

Modeling of an Unbonded CFRP Strap Shear Retrofitting System for Reinforced Concrete Beams

A retrofitting technique has been developed that uses carbon fiber-reinforced polymer (CFRP) straps to increase the shear capacity of reinforced concrete beams. The vertical straps are not bonded to the beam but are instead anchored against the beam, which makes this technique potentially more effective than bonded FRP retrofitting techniques. However, it also means that models for bonded FRPs are not appropriate for use with the straps. Instead, a model based on a shear friction approach has been developed where the strain in the straps is calculated based on a term that accounts for the effects of prestress and additional strain in the strap due to shear crack opening. The model can either consider the shear reinforcement to be smeared along the length of the beam or discrete elements. The “smeared” model was checked against an experimental database consisting of rectangular, T-, and deep beams, both in terms of predicted capacity and predicted strain in the straps. Overall the smeared model predicted the capacity of the specimens and, with some adjustments, the strains quite accurately. There were, however, cases when it was more appropriate to use the “discrete” model such as when the transverse reinforcement ratio was low or when the transverse reinforcement spacing was high. Further experimental data are required to fully validate the models and to determine appropriate limits on the use of the smeared model and the discrete model. However, the initial results are promising.     

Probabilistic uncertainty analysis of an FRF of a structure using a Gaussian process emulator

This paper introduces methods for probabilistic uncertainty analysis of a frequency response function (FRF) of a structure obtained via a finite element (FE) model. The methods are applicable to computationally expensive FE models, making use of a Bayesian metamodel known as an emulator. The emulator produces fast predictions of the FE model output, but also accounts for the additional uncertainty induced by only having a limited number of model evaluations. Two approaches to the probabilistic uncertainty analysis of FRFs are developed. The first considers the uncertainty in the response at discrete frequencies, giving pointwise uncertainty intervals. The second considers the uncertainty in an entire FRF across a frequency range, giving an uncertainty envelope function. The methods are demonstrated and compared to alternative approaches in a practical case study.     

A tall tower study of Missouri winds

This paper summarizes the results of a study of wind speeds observed at heights up to 150 m above ground level around Missouri. This is an amalgamation of four projects that allowed a total of eleven tall communication towers to be instrumented with wind observation equipment across the State of Missouri. This provided an assessment of the wind resource and the characteristics of the seasonal and diurnal cycles of wind in different areas of Missouri at the heights of utility scale wind turbines. Comparisons were also made to wind speeds predicted at these levels from a previously published wind map.The main finding was that the observed winds at each tower were smaller than those presented in the wind map. The discrepancy is most likely to be due to underestimation of the surface roughness and turbulence leading to an overestimation of near-surface wind shear. However, the wind shear, as expressed by the shear parameter was consistently greater than the ‘standard’ value of 1.4. The reconciliation of these two apparently contradictory findings is that the shear varies with the height at which it is measured. In wind resource assessment, wind shear is usually observed below 50 m and is tacitly assumed to be constant with height when used to extrapolate winds to higher levels. The author advocates the use of the friction velocity as a measure of shear in wind power applications in preference to the shear parameter that is usually used. This is because the shear parameter has a velocity bias that can also manifest as a bias with height or season. As wind power resource assessment is starting to use taller towers than the standard 50 m, intercomparison of site resources and extrapolation to turbine heights can be compromised if the shear parameter is used.     

Foodborne illness outbreaks from microbial contaminants in spices, 1973–2010

This review identified fourteen reported illness outbreaks attributed to consumption of pathogen-contaminated spice during the period 1973–2010. Countries reporting outbreaks included Canada, Denmark, England and Wales, France, Germany, New Zealand, Norway, Serbia, and the United States. Together, these outbreaks resulted in 1946 reported human illnesses, 128 hospitalizations and two deaths. Infants/children were the primary population segments impacted by 36% (5/14) of spice-attributed outbreaks. Four outbreaks were associated with multiple organisms. Salmonella enterica subspecies enterica was identified as the causative agent in 71% (10/14) of outbreaks, accounting for 87% of reported illnesses. Bacillus spp. was identified as the causative agent in 29% (4/10) of outbreaks, accounting for 13% of illnesses. 71% (10/14) of outbreaks were associated with spices classified as fruits or seeds of the source plant. Consumption of ready-to-eat foods prepared with spices applied after the final food manufacturing pathogen reduction step accounted for 70% of illnesses. Pathogen growth in spiced food is suspected to have played a role in some outbreaks, but it was not likely a contributing factor in three of the larger Salmonella outbreaks, which involved low-moisture foods. Root causes of spice contamination included contributions from both early and late stages of the farm-to-table continuum.     

Using strategic management practices to promote participatory democracy in Australian local government

Abstract

Strategic management was introduced as a critical component of Australian local government reform during the 1990s. In addition to encouraging efficiency and effectiveness of operation, it was also intended to promote participatory democracy within local authorities. The paper explores the extent to which this objective has been achieved through an analysis of twenty‐five New South Wales municipalities. Discussion concludes that while strategic management has enhanced community involvement in local governance, it cannot be a substitute for traditional democratic processes.