Compact method for optical induction of proximal probe heating and elongation

A tapered, metal-coated, optical fiber probe will elongate when heated by light input through a fiber. The induced motion can be used for data storage or nanostructuring of a surface. The elongation produced by this alignment-free system is measured with force feedback in a near-field scanning optical microscope (NSOM). The input light intensity controls the elongation magnitude, which ranges from a few nanometers to more than 100 nm. A 0.5-mW input energy yields approximately 20 nm of probe elongation. The elongation quantified here can create artifacts in any experiment using pulsed laser light with a NSOM or an atomic force microscope.     

Vector description of higher-order modes in photonic crystal fibers

We extensively study the propagation features of higher-order modes in a photonic crystal fiber (PCF). Our analysis is based on a full-vector modal technique specially adapted to accurately describe light propagation in PCF's. Unlike conventional fibers, PCF's exhibit a somewhat unusual mechanism for the generation of higher-order modes. Accordingly, PCF's are characterized by the constancy of the number of modes below a wavelength threshold. An explicit verification of this property is given through a complete analysis of the dispersion relations of higher-order modes in terms of the structural parameters of this kind of fiber. The transverse irradiance distributions for some of these higher-order modes are also presented, showing an excellent agreement with recent experimental measurements. In the same way, the full-vector nature of our approach allows us to analyze the rich polarization structure of the PCF mode spectrum.     

Preparation and characterization of new Ca–Al–polycarboxylate layered double hydroxides

The synthesis and characterization of composite materials based on calcium–aluminum layered double hydroxides (Ca–Al-LDHs), intercalated with organic polycarboxylate (PC) polymers, is described. The PC polymers, which exhibit a “comb-like” architecture, contain ethylene oxide side chains of different lengths. They are intercalated between the cationic Ca–Al–OH-layers when tricalcium aluminate is rehydrated in the presence of PC polymers. The intercalation compounds are characterized by X-ray diffraction (XRD), elemental analysis, IR spectroscopy and TEM. The basal spacings of the PC-LDH composite materials, determined by XRD, are dependent on the number of the ethylene oxide units (EOUs) in the side chain. Accordingly, first TEM micrographs reveal approximately similar layer distances. Elemental analysis as well as IR-spectroscopy proves the existence of the intercalated organic material.     

Design of structure/control systems with transient response constraints exhibiting relative minima

Structural optimization problems involving dynamic behaviour constraints often exhibit nonconvex design spaces. The direct application of a global optimization algorithm requires a large number of function evaluations which in turn require a large number of dynamic structural analyses. This work presents a strategy aimed at finding the global optimum for problems with transient dynamic behaviour constraints based on approximation concepts. The method consists of generating and solving a sequence of approximate problems using a global optimizer. The approximations are explicit and capture most of the inherent nonconvexity of the exact functions. A simple example. problem is presented to illustrate the procedure set forth.     

Fluorescence line narrowing spectroscopy of polycyclic aromatic hydrocarbons on solid-liquid extraction membranes

The potential of solid-liquid extraction fluorescence line narrowing spectroscopy is evaluated for screening polycyclic aromatic hydrocarbons in aqueous samples. Octadecyl silica membranes are used with the dual purpose of sample preconcentration and solid substrate for spectroscopic measurements. 4.2 K fluorescence line narrowed spectra are directly recorded from the membrane with the aid of a fiber-optic probe. The experimental procedure is free from organic solvents and takes less than 5 min per sample. With 10 mL of water sample, the limits of detection are at the parts-per-billion level. Qualitative analysis is based on wavelength time matrices, which provide a unique format for compound identification based on spectral and lifetime data. The selectivity of this approach is demonstrated with the unambiguous determination of naphthalene in a heavily contaminated water sample.     

Accurate Gate Impedance Determination on Ultraleaky MOSFETs by Fitting to a Three-Lumped-Parameter Model atFrequencies From DC to RF

We present an experimental methodology that demonstrates the suitability of the conventional three-lumped- parameter model for gate impedance of MOSFET devices at frequencies from dc to the gigahertz range, which permits accurate extraction of model parameters. The parasitic effects at a high frequency are minimized by using radio frequency techniques (i.e., short return paths and de-embedding structures), whereas a robust parameter extraction algorithm overcomes possible instrument inaccuracies. When combined, these allow simultaneous extraction of all three parameters (i.e., C_gate, R_DT and R_series) from the model. The technique is applied to conventional SiO₂ -based MOSFET devices and to ultraleaky HfO₂ devices with aggressively scaled gate dielectric thickness.     

Inverting a forest canopy reflectance model to retrieve the overstorey and understorey leaf area index for forest stands

In this article, the Kuusk–Nilson forest reflectance and transmittance (FRT) model was inverted to retrieve the overstorey and understorey leaf area index (OU-LAI) of forest stands in the Longmenhe forest nature reserve in China. Data from detailed sample sites were collected in 30 forest stands representing the typical vegetation community in the study area. An uncertainty and sensitivity matrix (USM) was used to analyse the sensitivity of the FRT model parameters based on these data. The results indicated that overstorey LAI strongly influenced stand reflectance, whereas understorey LAI had a much lower impact. To predict OU-LAI in forest stands, FRT model inversion is carried out by minimizing a merit function that provides a measure of the difference between the reflectance simulated by the FRT model and the reflectance originating from optimal band selection of Hyperion data. Various combinations of Hyperion bands were tested to evaluate the most effective wavelengths for the inversion of OU-LAI. The best estimates from 17 Hyperion bands (5 VIS, 8 NIR, 4 SWIR) by the FRT model inversion showed an R ²?=?0.41 and RMSE/mean?=?0.21 for overstorey LAI and R ²?=?0.49 and RMSE/mean?=?0.91 for understorey LAI. Advantages and disadvantages of FRT inversion for retrieval OU-LAI combined with Hyperion data are discussed.     

Digital Surface of Revolution with Hand-Drawn Generatrix

In this paper we present a simple method to create general 3D digital surfaces of revolution based on a 2D implicit curve of revolution (therefore not limited to a circle) and a hand-drawn generatrix. Our method can handle any sequence of Euclidean 2D points, which represents a curve, as generatrix. One can choose the topology of the surface that may have 1-tunnels, 0-tunnels or no tunnels with applications in 3D printing for instance. An online tool that illustrates the method is proposed.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

Color tracking with contextual switching: real-time implementation on CPU

Journal of Real-Time Image Processing - The paper proposes contributions for mean-shift (MS) and covariance tracking (CT), and makes these two complementary methods cooperate. While MS runs fast...