Experimental study on house cooling and heating with solar energy using flat plate collector

The OSE Project aims at developing the technology to utilize solar energy for heating, cooling and hot water supply on the basis of various technology for energy conservation in buildings. For the first step of this project a solar heating and cooling system with flat plate collectors and absorption refrigeration machine was installed in a house in 1974. This paper reports outlines of the system and operating results.     

Electrical conductivity and thermoelectric power in irradiated UO2 + x

Two kinds of UO_{2 + x}, the O/U ratios of which were 2.002 and 2.004, respectively, were irradiated to a dose range between 1.14 × 10¹⁴ and 1.90 × 10¹⁸ fissions/cm³, and electrical conductivity changes were measured. A steep decrease in conductivity was observed with increasing dose up to 1 × 10¹⁵ fissions/cm³, a gradual increase followed between 1 × 10¹⁵ and 1 × 10¹⁸ fissions/cm³ and above this dose the conductivity abruptly increased. Thermoelectric power measurements were also carried out for the specimens irradiated in the dose range up to 1.90 × 10¹⁸ fissions/cm³. It might be suggested that p-type conduction contributes to the electrical conductivity in irradiated specimens up to 1.90 × 10¹⁸ fissions/cm³.     

A simple method for minimizing non-linear image contrast in spherical aberration-corrected HRTEM

A simple and practical method for minimizing non-linear image contrast in spherical aberration-corrected (C(S)-corrected) high-resolution transmission electron microscopy is presented. The effectiveness of the method is considered from the viewpoints of theoretical formulations and image simulations including second-order imaging effects. The method is one of the advantages of C(S)-correction and applied to high-resolution images down to 0.1 nm. The dynamical diffraction effect is carefully evaluated, which shows that the phase deviation of diffracted waves from pi/2 violates the present method in thicker crystals over approximately 10 nm.     

Image processing based on seeded spontaneous optical pattern formation by optoelectronic feedback

Spontaneous optical pattern formation from an initial seed optical pattern in an optoelectronic system with optical diffractive feedback is investigated experimentally. We demonstrate that the temporal evolution of the spontaneously formed patterns exhibits a contrast enhancement effect, a spatial filtering effect, and filling of vacant space while the surrounding structures are maintained. These effects allow us to perform image processing of natural fringe patterns, i.e., in our experiments, fingerprint patterns. We also demonstrate image processing with defect invariance for fingerprint patterns.     

DNA and chemical analyses of commercial fly agaric-related products

Since June 6, 2002, psilocin and psilocybin-containing fungi (commonly called "magic mushrooms") have been regulated by the Narcotics and Psychotropics Control Law in Japan. However, various fly agaric-related products are now entering the Japanese market via the internet. In this study, fly agaric-related products available in this way were investigated for raw materials by DNA analysis and for additives by chemical analysis. Nucleotide sequence analysis of the mitochondrial 12S rDNA region suggested that these fly agaric-related products originate from A. muscaria or A. muscaria var. persicina. Furthermore, they were classified into three strains based on the ITS2-LSU nucleotide sequence. Harmine derivatives and/or tryptamine derivatives were detected in some of these products by LC/MS analysis. In accordance with this, the matK gene of Peganum harmala was found in all of the harmine derivative-containing samples.     

Estimation of heat evolution during viscoelastic crack propagation by liquid crystal film technique

Heat generated during dynamic crack propagation in viscoelastic solids was investigated by visible liquid crystal film technique to observe the thermal boundary front emanating from a running crack tip. The crack propagation velocity was also measured by the velocity gauge method. The heat so estimated is correlated with the crack propagation velocity.     

Strain rate effects on viscoelastic crack bifurcation

The effects of applied strain rate on the viscoelastic crack bifurcation phenomenon in Polymethyl Methacrylate (PMMA) were investigated. It was still verified that the product $\text{σ}{}_{\mathrm{f}}\text{C}{}_{\mathrm{b}}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ was constant, as was already observed by Congleton and Petch, and Anthony, Chubb and Congleton, for brittle elastic materials, for any strain rate, where σ_f = the gross fracture stress and C_b= the main crack length until the bifurcation starts. However, it was found that the higher strain rate increases the main crack length C_b resulting in the decrease in the gross fracture stress σ_f and vice versa. This might be interpreted that the higher stress concentration at the initiation crack tip, which is realized by becoming more brittle due to the higher strain rate owing to the predominance of the elastic element in the viscoelastic material, decreases the gross fracture stress leading to the longer main crack length.