Generation of high-quality higher-order Laguerre-Gaussian beams using liquid-crystal-on-silicon spatial light modulators

We report on the high-quality holographic generation of higher-order Laguerre-Gaussian (LG) beams using a liquid-crystal-on-silicon spatial light modulator. The effects of the input beam pattern on the output LG beam quality are investigated in detail through theoretical discussions and experiments. Correlation analyses between observed beam patterns and theoretical mode profiles reveal that higher beam quality is achieved for output LG beams generated from a top-hat input beam than from a Gaussian input beam.     

Mixing in multiple-impeller stirred tank reactors with boiling liquids

Mixing in a boil-off mechanically stirred tank reactor with multiple impellers was examined. Power consumption and gas hold-up were measured in boiling water in a 0.2 m i.d. stirred tank reactor with three four-pitched blade downflow disk turbines. Vapour was generated from both the immersed ring heater and the impellers. At low vapour generation rates, vapour was mainly generated from the impellers rather than from the heater, whereas nucleation occurred at the heater instead of the impeller at higher vapour generation rates. The mechanical power consumption decreased due to vapour generation. The change in boiling-to-non-boiling mechanical power ratio with varying impeller rotational speed and boiling rate was complicated and not monotonous except at higher impeller speeds and boiling rates. The gas hold-ups increased with increasing vapour generation rate but were rather small as compared to those in cold gas dispersing systems. Empirical correlations for power consumption and gas hold-up in boiling liquids were developed using the present experimental data.     

Cavitation erosion resistance of stellite alloy weld overlays

Stellite alloys have excellent cavitation erosion resistance and are often used for liquid machinery, but the erosion properties of various stellite alloys have not been evaluated by a standard method. In this study, we evaluate the erosion resistance for various stellite alloy weld overlays of ST6 and ST21 in a vibrating method and in a cavitating liquid jet method. The grain size of the Co matrix affects the cavitation erosion resistance of stellite alloy weld overlays of ST6. The erosion rate of the maximum rate stage of stellite weld overlay alloys of ST6-1, ST6-2 and ST6-3 were found to be about 1/13 to 1/7 times that of SUS304. Moreover, we clarified the cavitation erosion mechanism of SUS304 and ST6 by scanning electron microscopy. Furthermore, by comparing the erosion behavior in a cavitating liquid jet method with that in a vibratory method, it was found that the erosion rate of the cavitating jet method and the vibratory method have a good correlation.     

Quantum dot as a drug tracer in vivo

Quantum dots (QDs) have been applied to a wide range of biological studies by taking advantage of their fluorescence properties. There is almost no method to trace small molecules including medicine. Here, we used QDs for fluorescent tracers for medicine and analyzed their kinetics and dynamics. We conjugated QDs with captopril, anti-hypertensive medicine, by an exchange reaction while retaining the medicinal properties. We investigated the medicinal effect of QD-conjugated captopril (QD-cap) in vitro and in vivo. We also evaluated the concentration and the distribution of the QD-cap in the blood and the organs with their fluorescence. We demonstrate that the QD-cap inhibits the activity of ACE in vitro. The QD-cap reduced the blood pressure of hypertensive model rats. The concentration of the QD-cap in the blood was measured by using the standard curve of the fluorescence intensity. The blood concentration of the QD-cap decrease exponentially and QD-cap has approximately the same half-life as that of captopril. In addition, the fluorescence of the QDs revealed that QD-cap accumulates in the liver, lungs, and spleen. We succeeded in analyzing the dynamics and kinetics of small molecules using fluorescence of QDs     

Changes in vascular leakage and expression of angiopoietins in the corpus luteum during pregnancy in rats

The present study investigates changes in blood vessel stability and its regulation in the corpus luteum (CL) during pregnancy in the rat. First, blood vessel stability in the CL was evaluated during pregnancy based on vascular leakage, which was quantified by the Evans blue assay. Vascular leakage was highest on day 3, thereafter decreased until day 15 and increased again on day 21. Secondly, to study the regulation of vascular leakage, the expression of angiopoietins was examined in the CL during pregnancy. Angiopoietin-1 (Ang-1) effects maturation and stabilization of newly formed blood vessels, while Ang-2 produces the opposite effect by allowing vascular remodeling. An immunohistochemical study showed both Ang-1 and Ang-2 expression in luteal cells. mRNA and protein levels of Ang-1 were significantly higher on days 12 and 15 than those on days 3 and 21, whereas there was no significant change in Ang-2 expression. Since estradiol contributes to CL development during mid-pregnancy, we finally studied whether estradiol regulates vascular leakage and angiopoietin expression. Rats undergoing hypophysectomy and hysterectomy (hypox-hect) on day 12 were treated with estradiol until day 15. Vascular leakage was increased and Ang-1 expression was decreased by hypox-hect, and these effects were completely reversed by estradiol treatment. In conclusion, blood vessel stability in the CL is likely to be associated with CL development and CL regression, and may be regulated by angiopoietins. Estradiol contributes to blood vessel stabilization in the CL during mid-pregnancy, which is associated with an increase in Ang-1 expression.     

Synthesis of mesoporous titania nanoparticles with anatase frameworks and investigation of their photocatalytic performance

In this research paper, we synthesize various types of mesoporous titania nanoparticles (MTNs) with suitable surface area and pore size while creating anatase frameworks by applying hydrothermal treatment or calcination at different temperatures. Wide-angle XRD patterns and N2 adsorption-desorption isotherms reveal that the MTNs with crystallized anatase frameworks can be synthesized after an optimized hydrothermal treatment. In contrast, calcination of MTNs at high temperature caused the collapse of mesoporous structure, resulted in drastic reduction of the surface area of the MTNs. In addition, we investigate the photocatalytic activity of the prepared MTNs by measuring the degradation of methylene blue (MB). The results show that the reaction rates of the photocatalytic MB decomposition strongly depend on the degree of crystallinity in the MTNs frameworks and on the surface area of MTNs.     

Critical effect of aging condition on mesostructural ordering in mesoporous titania thin film

Here we demonstrate facile synthesis method for formation of highly ordered mesoporous cubic Im-3 m titania thin film. The mesostructural ordering is strongly dependent on the aging condition after the spin-coating. The aging condition under low temperature and low humidity is found as an optimum condition for achieving highly ordered mesostructure in titania thin films. The effects of other important synthetic parameters, such as pH of the precursor solutions and aging periods, on the mesostructural ordering are carefully examined. After the calcination, continuous mesoporous films with partially crystallized frameworks are formed without any cracks. The mesostructure of the calcined films is formed by thermal shrinkage of the original Im-3 m mesostructure. The mesostructural change in the films calcined at various temperatures are studied by using the grazing-incidence small-angle X-ray scattering (GI-SAXS). The GI-SAXS patterns show the strong shrinkage along the perpendicular direction to the substrate by increasing the calcination temperature.     

A multi-walled carbon nanotube/polymer actuator that surpasses the performance of a single-walled carbon nanotube/polymer actuator

Actuators were developed using activated and non-activated multi-walled carbon nanotube (MWCNT)–ionic liquid (IL) gel electrodes and compared to a single-walled carbon nanotube (SWCNT)-based actuator with respect to the electrochemical and electromechanical properties. The activated MWCNT–COOH/polymer actuator surpassed the SWCNT/polymer actuator in terms of the generated strain.     

αs-casein inhibits the pressure-induced aggregation of β-lactoglobulin through its molecular chaperone-like properties

In this work, the effects of α_s-casein (α_s-CN) on the pressure-induced aggregation of β-lactoglobulin (β-Lg) were studied. α_s-CN depressed the pressure-induced aggregation of β-Lg, and this function was dependent on the concentration of α_s-CN and the pressure holding time. Furthermore, α_s-CN altered the aggregation process of β-Lg by suppressing the transition of the aggregate from the soluble phase to the insoluble phase and, as a result, the fraction of insoluble aggregates was decreased. During this process, α_s-CN formed stable complexes with the denatured β-Lg and the formation of complexes prevented further aggregation of β-Lg and solubilized aggregated β-Lg to a small degree of polymerization. These results indicate that α_s-CN exhibits a chaperone-like activity under high pressure, and provide an insight into the possible mechanism by which α_s-CN accomplishes the task of stabilizing proteins to resist the pressure-induced aggregation of β-Lg.