（1S，2S，5R）-薄荷基取代烯烃的合成

以(L)-薄荷基氯为原料,通过薄荷基氯化镁分别与烯丙基溴、2-甲基-3-氯丙烯、1-溴-3-甲基-2-丁烯在Cul催化下发生偶联反应,首次合成了3-(1S,2S,5R)-薄荷基-1-丙烯,2-甲基-3-(1S,2S,5R)-薄荷基-1-丙烯和2-甲基-4-(1S,2S,5R)-薄荷基-2-丁烯,总收率分别为80.5%、83.1%和79.6%.探讨了影响反应的多种因素,找到了较好的合成条件,并用IR、 1HNMR和元素分析对产物进行了表征.     

On the elemental effect of AlCoCrCuFeNi high-entropy alloy system

The AlCoCrCuFeNi high-entropy alloy system was synthesized using a well-developed arc melting and casting method. Their elemental effect on microstructures and hardness was investigated with X-ray diffraction, scanning electron microscopy and Vickers hardness testing. The alloys exhibit quite simple FCC and BCC solid solution phases. Co, Cu and Ni elements enhance the formation of the FCC phase while Al and Cr enhance that of the BCC phase in the alloy system. BCC phases form a spinodal structure during cooling. Copper tends to segregate at the interdendrite region and forms a Cu-rich FCC phase. Low copper content renders the interdendrite as a thin film and the as-cast structure like recrystallized grain structure. The formation of BCC phases significantly increases the hardness level of the alloy system. The strengthening mechanism is discussed.     

腐蚀环境中海工混凝土抗氯离子侵蚀性

模拟我国南方沿海浪溅区和水位变动区的海工钢筋混凝土结构物的腐蚀环境，对掺入粉煤灰和矿渣的混凝土抗氯离子侵蚀性进行了试验。结果表明，在水灰比相同的条件下，加掺和料的混凝土抗氯离子侵蚀性高于普通混凝土。     

框架结构焦仓的定向倒塌爆破

介绍了框架结构焦仓定向爆破拆除的设计与施工，着重介绍了爆破参烽的选取及安全防护措施。达到预期的爆破效果。     

Viscous and Aeroelastic Effects on Wind Turbine Blades. The VISCEL project. Part I: 3D Navier–Stokes Rotor simulations

Aerodynamic modelling of HAWT rotors by means of “engineering methods” has reached a saddle point, where no further development can be expected without a breakthrough in understanding the physics of unsteady, rotating three‐dimensional flows. However, such a breakthrough becomes ever more necessary, as the size of the wind turbines increases. With the experimental work in that direction being mostly limited to observing the phenomena and interpreting the associated mechanisms, and its increased cost, alternatives are being sought. The use of CFD techniques and state‐of‐the‐art Navier–Stokes solvers is considered a very serious contender, a belief shared by the members of the present consortium, which has worked on the VISCEL JOR3‐CT98‐0208 Joule III project. This project's goal was to determine the aerodynamic characteristics as well as the aeroelastic behaviour of wind turbine blades across their broad range of operational conditions, from attached to highly separated flow regimes. The work programme included specific tasks for the validation and assessment of existing 3D solvers, for the parametric study of 3D flow around realistic blades and for the investigation of aeroelastic stability, at the blade section level. Copyright © 2003 John Wiley & Sons, Ltd.     

低功率激光治疗血管性头痛24例

低功率激光穴位照射治疗血管性头痛24例,总治愈率54.2%,好转率29.2%,无效率16.6%,但头痛部位、治疗经穴的不同,疗效差别很大。     

基于ANN实现的供应需求预测方法

基于人工神经网络技术，建立了后勤供应需求的网络预测方法，并以某区域高校后勤保障需求为例，给出了后勤供应需求预测的步骤与实现过程。     

Influence of melt superheat on breakup process of close-coupled gas atomization

In close-coupled gas atomization（CCGA）, the influences of melt superheat on breakup process are fundamental to obtain desired or finer powder. Based on a series of Cu atomization experiment under different superheating conditions, the influences of melt superheat on breakup process were studied. Experimental results indicate that as the melt superheat is increased to 150, 200, 250 and 300 K, the mean particle size （D50） decreases consequently to 34.9, 32.3, 30.9 and 19.7 μm. Theoretical analysis reveals that the primary breakup and secondary breakup processes are close coupled, and the melt superheat radically influences the melt properties, and plays a crucial role on governing the filming process of primary breakup and the atomization modes of secondary breakup. There exists a strong nonlinear decrease of contact angle of melt to nozzle orifice wall when the superheat is increased fi＇om 250 K to 300 K, leading to a marked fall of the film thickness formed in primary breakup, and D50 of copper powders is therefore sharply reduced. However, the log-normal distribution feature of particle size has not been substantially improved.     

薄膜波导光隔离器和光电子单片集成技术

叙述了Ｂｉ，Ａｌ：ＹＩＧ薄膜的液相外延生长，研究了这种薄膜材料的光吸收系数、法拉第旋转角、磁光优值及生长感生磁各向异性与Ｂｉ含量的关系。在此基础上，连续外延生长了作单模磁光波导的双层Ｂｉ，Ａｌ：ＹＩＣ薄膜。光纤偏振器的使用使薄膜波导光隔离器向实用化迈进了一步，恒磁薄膜作偏磁场为器件集成化作出了贡献。采用ＭＯＣＶＤ技术，在ＧＧＧ（钆镓石榴石）基片上同时外延生长Ⅲ－Ⅴ族半导体薄膜和钇铁石榴石（ＹＩＧ）薄膜，把光隔离器和磁光光源直接集成在一起，是一种非常有前景的光电子集成组件。     

Ce3+离子对掺Er3+碲酸盐玻璃光谱性质的影响

研究了Ce3 + 对掺Er碲酸盐玻璃荧光光谱性质的影响 ,比较了不同的Ce3 + 掺杂浓度下Er3 + 离子荧光发光强度的变化 ,分析了Ce3 + 离子对Er3 + 离子作用的原理 ,应用经典方程计算了Er3 + 离子 4I1 1 / 2 能级的荧光寿命及其变化