Characterization of a direct detection device imaging camera for transmission electron microscopy

The complete characterization of a novel direct detection device (DDD) camera for transmission electron microscopy is reported, for the first time at primary electron energies of 120 and 200 keV. Unlike a standard charge coupled device (CCD) camera, this device does not require a scintillator. The DDD transfers signal up to 65 lines/mm providing the basis for a high-performance platform for a new generation of wide field-of-view high-resolution cameras. An image of a thin section of virus particles is presented to illustrate the substantially improved performance of this sensor over current indirectly coupled CCD cameras.     

Characterization of Gradual Porous Ceramic Structures Obtained by Powder Sedimentation

Asymmetric membranes present better separation and service characteristics than the symmetric ones. In our preliminary studies the possibility of obtaining sintered porous materials with gradual structure by sedimentation of metallic and ceramic powders was demonstrated. Zirconium silicate (ZrSiO4) particles were used for the manufacturing of the porous supports, and mullite powder was deposited by sedimentation in order to achieve the active layer with pores size gradient. The used powders and the obtained structures were characterized by laser scattering particle size analyzer, scanning electron microscopy and mercury porosimetry. The permeability and the filtration fineness of the structures were also determined. By using a thin active layer made of small particles deposited onto a macro-porous support, one can achieve membranes with high flow rates and filtration fineness in the microfiltration area.     

Design and fabrication of a novel microfluidic nanoprobe

The design and fabrication of a novel microfluidic nanoprobe system are presented. The nanoprobe consists of cantilevered ultrasharp volcano-like tips, with microfluidic capabilities consisting of microchannels connected to an on-chip reservoir. The chip possesses additional connection capabilities to a remote reservoir. The fabrication uses standard surface micromachining techniques and materials. Bulk micromachining is employed for chip release. The microchannels are fabricated in silicon nitride by a new methodology, based on edge underetching of a sacrificial layer, bird's beak oxidation for mechanically closing the edges, and deposition of a sealing layer. The design and integration of various elements of the system and their fabrication are discussed. The system is conceived mainly to work as a "nanofountain pen", i.e., a continuously writing upgrade of the dip-pen nanolithography approach. Moreover, the new chip shows a much larger applicability area in fields such as electrochemical nanoprobes, nanoprobe-based etching, build-up tools for nanofabrication, or a probe for materials interactive analysis. Preliminary tests for writing and imaging with the new device were performed. These tests illustrate the capabilities of the new device and demonstrate possible directions for improvement.     

Statistical and Hybrid Methods for Speech Recognition in Romanian

The present paper describes the evolution of our work concerning the problem of speech recognition. Beginning with a classical hidden Markov model (HMM), we have investigated two ways to improve the performance of this basic structure. The first way was to realize a neuro-statistical hybrid by integrating a multilayer perceptron (MLP) as a posteriori probability estimator. The system was further refined by adding supplementary discriminative training (DT) based on the minimum classification error (MCE). Tests performed on a 15,000 isolated spoken-word database, showed an increase in the recognition rate from 92.2% for the HMM-based recognition system, to 94.7% for the HMM-MLP system, and then to 98.1% for the refined HMM-MLP-DT system. The second way to improve the classical HMM was to build a fuzzy-statistical hybrid, FHMM, based on a fuzzy similarity measure instead of the probabilistic measure specific to the usual statistical model. The benefits of the fuzzy measure introduction were evaluated on a vowel recognition task, and a decrease of approximately 3% in the error rate is reported.     

Towards a Treatment for Neuroinflammation in Epilepsy: Interleukin-1 Receptor Antagonist,Anakinra, as a Potential Treatment in Intractable Epilepsy

Febrile Infection-Related Epilepsy Syndrome (FIRES) is a unique catastrophic epilepsy syndrome, and the development of drug-resistant epilepsy (DRE) is inevitable. Recently, anakinra, an interleukin-1 receptor antagonist (IL-1RA), has been increasingly used to treat DRE due to its potent anticonvulsant activity. We here summarized its effects in 38 patients (32 patients with FIRES and six with DRE). Of the 22 patients with FIRES, 16 (73%) had at least short-term seizure control 1 week after starting anakinra, while the remaining six suspected anakinra-refractory cases were male and had poor prognoses. Due to the small sample size, an explanation for anakinra refractoriness was not evident. In all DRE patients, seizures disappeared or improved, and cognitive function improved in five of the six patients following treatment. Patients showed no serious side effects, although drug reactions with eosinophilia and systemic symptoms, cytopenia, and infections were observed. Thus, anakinra has led to a marked improvement in some cases, and functional deficiency of IL-1RA was indicated, supporting a direct mechanism for its therapeutic effect. This review first discusses the effectiveness of anakinra for intractable epileptic syndromes. Anakinra could become a new tool for intractable epilepsy treatment. However, it does not currently have a solid evidence base.     

Studies on the thermal and mechanical behavior of PLA‐PET blends

The increasing use of bio‐sourced and biodegradable polymers such as poly(lactic acid) (PLA) in bottle packaging presents an increasing challenge to the polyethylene terephthalate (PET) recycling process. Despite advanced separation technologies to remove PLA from PET recyclate, PLA may still be found in rPET process streams. This study explores the effects of PLA on the mechanical properties and crystallization behavior of blends of PET containing 0.5–20% PLA produced by injection molding. SEM indicates an immiscible blend of the two polymers and TGA confirms the independent behavior of the two polymers under thermal degradation conditions. Temperature‐modulated DSC studies indicate that adding PLA to PET increases the rigid amorphous fraction of the PET moiety. Critical amounts of PLA induce stress oscillation behavior during mechanical testing. The mechanical behavior of the samples is explained by antagonistic interaction between increased rigid amorphous fraction and decreased fracture strength arising from an increased population of PLA microparticles. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44147.     

A parallel system for text inference using marker propagations

This paper presents a possible solution for the text inference problem-extracting information unstated in a text, but implied. Text inference is central to natural language applications such as information extraction and dissemination, text understanding, summarization, and translation. Our solution takes advantage of a semantic English dictionary available in electronic form that provides the basis for the development of a large linguistic knowledge base. The inference algorithm consists of a set of highly parallel search methods that, when applied to the knowledge base, find contexts in which sentences are interpreted. These contexts reveal information relevant to the text. Implementation, results, and parallelism analysis are discussed     

Mineralogical characterization of arsenic in uranium mine tailings precipitated from iron-rich hydrometallurgical solutions

Arsenic-rich uranium mine tailings from the Rabbit Lake in-pit tailings management facility (RLITMF) in northern Saskatchewan, Canada, were investigated to determine the mineralogy and long-term stability of secondary arsenic precipitates formed from iron-rich hydrometallurgical solutions. Total arsenic and iron concentrations in six iron-rich samples of the mine tailings ranged from 56 to 6,000 microg/g and from 12 600 to 30 200 microg/g, respectively (Fe/As molar ratios of 5.3-303). On the basis of stability field diagrams generated from pH, Eh, and temperature measurements on tailings samples (mean values of 9.79, +162 mV, and 2.8 degrees C, respectively), it was concluded that arsenic and iron in the tailings were stable as As5+ and Fe3+. Synchrotron-based X-ray absorption spectroscopic studies of tailings samples, fresh mill precipitates, and reference compounds showed that the arsenic in iron-rich areas of the tailings existed as the stable As5+ and was adsorbed to 2-line ferrihydrite through inner-sphere bidentate linkages. Furthermore, under the conditions in the RLITMF, the 2-line ferrihydrite did not undergo any measurable conversion to more crystalline goethite or hematite, even in tailings discharged to the RLITMF 10 yr prior to sampling.     

The diffusion barrier effect of a vanadium layer in the formation of nickel silicides

The formation of nickel silicides and vanadium silicides and the diffusion barrier effect of a vanadium layer in the formation of nickel silicides were studied for annealed metal films deposited on silicon substrates by depth profiling using secondary ion mass spectrometry and X-ray diffraction. Nickel films more than 2500 Å thick react with silicon after annealing at 400 °C for 30 min in a vacuum. A vanadium layer 250 Å thick between nickel and silicon shows a barrier effect in the nickel silicide formation after annealing at 400 °C for 30 min. The barrier effect of a vanadium layer 250 Å thick becomes imperfect after annealing at 500 °C for 30 min.