A New IIP2 Enhancement Technique for CMOS Down-Converter Mixers

The design of a CMOS mixer for cellular phone and 3G applications is challenging because of tough linearity and noise requirements. A new technique for second-order input intercept point (IIP2) enhancement of CMOS down-converter mixers is introduced in this brief. The technique is based on canceling second-order intermodulation components generated in input pseudodifferential transconductor, by injecting a nonlinear current to the mixer. Since this current is controlled by a high bandwidth feedback loop, the cancellation technique can be used in multistandard mixers for high channel bandwidth applications like UMTS and IEEE802.11 as well as GSM. A CMOS mixer demonstrating the performance for UMTS standard is designed in a 65-nm technology which can work with supplies as low as 1 V. The simulation results show that the differential and common mode IIP2 of the mixer are improved about 22 and 29 dB, respectively, while cancellation circuit consumes less than 3.3 mA. The other mixer parameters such as noise figure are not affected by the proposed technique.     

Nanoelectromechanical Chip (NELMEC) Combination of Nanoelectronics and Microfluidics to Diagnose Epithelial and Mesenchymal Circulating Tumor Cells from Leukocytes

An integrated nano‐electromechanical chip (NELMEC) has been developed for the label‐free distinguishing of both epithelial and mesenchymal circulating tumor cells (ECTCs and MCTCs, respectively) from white blood cells (WBCs). This nanoelectronic microfluidic chip fabricated by silicon micromachining can trap large single cells (>12 µm) at the opening of the analysis microchannel arrays. The nature of the captured cells is detected using silicon nanograss (SiNG) electrodes patterned at the entrance of the channels. There is an observable difference between the membrane capacitance of the ECTCs and MCTCs and that of WBCs (measured using SiNG electrodes), which is the key indication for our diagnosis. The NELMEC chip not only solves the problem of the size overlap between CTCs and WBCs but also detects MCTCs without the need for any markers or tagging processes, which has been an important problem in previously reported CTC detection systems. The great conductivity of the gold‐coated SiNG nanocontacts as well as their safe penetration into the membrane of captured cells, facilitate a precise and direct signal extraction to distinguish the type of captured cell. The results achieved from epithelial (MCF‐7) and mesenchymal (MDA‐MB231) breast cancer cells circulated in unprocessed blood suggest the significant applications for these diagnostic abilities of NELMEC.     

Fault detection and diagnosis in synchronous motors using hidden Markov model-based semi-nonparametric approach

Early detection and diagnosis of faults in industrial machines would reduce the maintenance cost and also increase the overall equipment effectiveness by increasing the availability of the machinery systems. In this paper, a semi-nonparametric approach based on hidden Markov model is introduced for fault detection and diagnosis in synchronous motors. In this approach, after training the hidden Markov model classifiers (parametric stage), two matrices named probabilistic transition frequency profile and average probabilistic emission are computed based on the hidden Markov models for each signature (nonparametric stage) using probabilistic inference. These matrices are later used in forming a similarity scoring function, which is the basis of the classification in this approach. Moreover, a preprocessing method, named squeezing and stretching is proposed which rectifies the difficulty of dealing with various operating speeds in the classification process. Finally, the experimental results are provided and compared. Further investigations are carried out, providing sensitivity analysis on the length of signatures, the number of hidden state values, as well as statistical performance evaluation and comparison with conventional hidden Markov model-based fault diagnosis approach. Results indicate that implementation of the proposed preprocessing, which unifies the signatures from various operating speeds, increases the classification accuracy by nearly 21% and moreover utilization of the proposed semi-nonparametric approach improves the accuracy further by nearly 6%.     

Color image segmentation with genetic algorithm in a raisin sorting system based on machine vision in variable conditions

This study was undertaken to develop machine vision-based raisin detection technology for various lighting conditions. Supervised color image segmentation using a permutation-coded genetic algorithm (GA) identifying regions in hue–saturation–intensity (HSI) color space (GAHSI) for desired and undesired raisin detection in various conditions was successfully implemented. Images from two extreme intensity lighting and dense conditions: under weak lighting and high-density product and under suitable lighting and low-density product, were mosaicked to explore the possibility of using GAHSI to locate desired raisin and undesired raisin regions in color space when these two extremes were presented simultaneously. The GAHSI results provided evidence for the existence and separability of such regions. In the experiment, GAHSI performance was measured by comparing the GAHSI-segmented image with a corresponding hand-segmented reference image. When compared with cluster analysis-based segmentation results, the GAHSI method showed no significant difference.     

Nachgiebiger Elektrodenträger für Cochlea-Implantate mit fluidischer Aktuierung

The cochlear implant, consisting of a compliant electrode carrier (ET) and embedded electrodes with contact wires, is an auditory neuroprosthesis, which is surgically inserted into the inner ear (cochlea) in order to create an auditory impression in the hearing-impaired patients. For simplification of the insertion, a fluidically actuated electrode carrier with a changeable curvature is presented. The deformation of the ET is specifically manipulated by applying pressure to its interior and also by a non-stretchable thin fibre or stripe embedded in its wall. An analytical examination of scaling properties allows to use scaled structures for models and measurements. In order to determine the geometry of the ET, a model-based synthesis – FE method combined with analytical modelling – is carried out. The synthesis resulted in a conical shape of the ET with a cylindrical cavity closed at one end and a fiber running parallel to the cavity. Experimental studies on a measuring geometry show a maximum deviation of 0,6 bar at a maximum internal pressure of 6 bar. The investigations show that the proposed synthesis method is suitable for the development of surgical instruments with adjustable curvature.     

Design-Operation of Multi-Hydropower Reservoirs: HBMO Approach

To illustrate and test the applicability and performance of the innovative honey-bee mating optimization (HBMO) algorithm in highly non-convex hydropower system design and operation, two problems are considered: single reservoir and multi-reservoir. Both hydropower problems are formulated to minimize the total present net cost of the system, while achieving the maximum possible ratio for generated power to installed capacity. The single hydropower reservoir problem is approached by the developed algorithm in 10 different runs. The first feasible solution was generated initially and later improved significantly and solutions converged to a near optimal solution very rapidly. In the application of the proposed algorithm to a five-reservoir hydropower system with 48 periods and a total of 230 decision variables, in early mating flights, the first feasible solution was identified and the results converged to a near optimal solution in later mating flights. In the case of the multi-reservoir problem, an efficient gradient-based nonlinear-programming solver (LINGO 8.0) failed to find a feasible solution and for the single hydropower reservoir design problem it performed much worse than the proposed algorithm.     

Taguchi统计学分析方法优化Al 7068-TiC纳米复合材料的凝固行为

采用机械合金化和热压工艺制备高强Al 7068?5%TiC(质量分数)纳米复合材料。基于致密化的重要性和晶粒生长的影响,以获得较高抗压强度为目标,采用Taguchi统计法对制备Al 7068?5%TiC块体纳米复合材料的热压条件进行优化。结果表明：在500 MPa和385°C下热压30 min能获得抗压强度为938 MPa、硬度为HV 265的Al 7068?TiC纳米复合材料。此外,方差分析结果表明,外加压力是影响纳米复合材料热压过程最关键的因素。各因素对纳米复合材料热压过程影响贡献率为外加压力(61.3%)、热压温度(29.53%)和热压时间(4.49%)。     

The effect of MWNTs concentration and nanofiber orientation on mechanical properties of PAA nanocomposite nanofibrous web

In this research, nanocomposite nanofibrous webs of poly(acrylic acid) (PAA)/multi‐walled carbon nanotubes (MWNTs) were obtained via electrospinning. The effect of MWNTs concentration on the morphology and mechanical properties of PAA/MWNTs nanofibers was investigated by changing the MWNTs content from 0 to 5 wt%. The results showed that average diameter of nanofibers increased with increasing the MWNTs concentration and presence of MWNTs led to the enhancement of mechanical properties. Also, the results revealed that the strength, modulus, and elongation at break of samples increased 3.22, 2.70, and 4.27 fold, respectively, after adding 3 wt% of MWNTs. In addition, the effect of rotating speed of collector on the orientation of PAA nanofibers and its effect on mechanical properties was investigated. Scanning electron microscopy (SEM) studies demonstrated that the degree of nanofibers orientation increased with the augmentation of drum speed to 25 rps. Moreover, the average nanofibers diameter decreased with the increase of drum speed. Improvement of nanofiber orientation resulted in superior mechanical properties that is, higher strength and modulus of aligned nanofiber layers were obtained in comparison to nonaligned layers (12.6 and 26.6 fold, respectively). POLYM. COMPOS., 37:3149–3159, 2016. © 2015 Society of Plastics Engineers