Residual strength prediction for aircraft panels with Multiple Site Damage,using the “EPFEAM” for stable crack growth analysis

In this paper, a new analytical method for solving stable crack propagation problems in a ductile panel with a row of cracks, is presented. The main purpose of the present study is to estimate the maximum load carrying capacity of such panels accurately. The so called Elastic Plastic Finite Element Alternating Method (Pyo et al. (1994) was extended to account for the propagating cracks. The crack propagation algorithm utilizes the analytic crack solution to release the stresses ahead the crack tip. The T _inf ^sup* integral is employed as the crack extension criterion. This integral parameter accounts for the near tip stress-strain singularity and its critical values for crack propagation can be extracted from the P-a curve of single cracked specimen case. The present method can be applied to the problems of the fuselage skin of aging airplanes, in which a row of cracks develop (MSD; Multiple Site Damage) from rivet holes. The load carrying capacity of such damaged structure reduces by a considerable amount. In order to predict the behavior near the critical load, one must account for plastic deformation, if the material is ductile. Furthermore, the maximum load carried by the structure is often reached after some amount of crack propagation. In this paper, a series of analyses have been conducted and their results compare with the available experimental data.     

An elastic-plastic finite element alternating method for analyzing wide-spread fatigue damage in aircraft structures

In this paper, a new analytical technique to study the effect of wide-spread fatigue damage in ductile panels is presented. The main purpose of the study is to develop an efficient methodology to predict the maximum load carrying capacity of panels with cracks. The problem arises especially in the fuselage skin of aging airplanes, in which cracks initiate from a row of rivet holes. This problem is known as Multi Site Damage (MSD) in aging aircraft. It is very important to estimate the load carrying capacity. Usually, the approach based on elastic fracture mechanics may overestimate the load capacity. It is very important for the aircraft structure with MSD to estimate the load carrying capacity of such damaged structures. Approaches based on elastic fracture mechanics often lead to a considerable error. In this paper, the Elastic Finite Element Alternating Method (EFEAM) has been extended to the case of elastic-plastic fracture of panels with MSD cracks. In EFEAM, analytical solutions to crack problems in an infinite plate are employed. In this study, we adopted an analytical solution for a row of cracks in an infinite panel. Furthermore, the plastic deformation is accounted for, by using the initial stress algorithm. The T _inf ^sup* integral is employed for the fracture criterion. The methodology developed in the present study can be called as Elastic-Plastic Finite Element Alternating Method (EPFEAM) for MSD problems. A series of studies on the maximum load capacity of panels with a row of cracks has been conducted.The support of this work by the Federal Aviation Administration through a grant to the Center of Excellence for Computational Modeling of Aircraft Structures, at the Georgia Institute of Technology, is sincerely appreciated.     

Subcritical interlaminar crack growth in fibre composites exhibiting a risingR-curve

Subcritical crack growth behaviour has been evaluated in composite laminates based on uniaxial carbon fibres in poly(ether-ether ketone) matrices. Double cantilever beam (DCB) specimens have been employed to give mode I loading and it is first shown that the materials exhibit a risingR-curve, i.e. the value of the interlaminar fracture energy,G _IC, increases as the crack propagates through the specimens. Secondly, when a DCB specimen is held at a constant displacement, subcritical crack growth is found to occur. The velocity of the subcritical crack growth,v, has been measured using a load-relaxation technique. Hence, values of the crack velocity,v, have been obtained as a function of the strain-energy release rate,G _I applied during subcritical crack growth. Owing to the presence of theR-curve, these data have been measured at various stages during the development of theR-curve. The relationships betweenv andG _I are modelled using power-law expressions. Finally, it is considered that theR-curve behaviour is most likely caused by the fibre bridging which develops behind the crack tip as the delamination propagates through the specimen. Fibre bridging allows stress to be transferred across the crack faces, behind the advancing crack tip, and so results in a shielding of the stress field at the crack tip from the applied stress. Therefore, the expression ascertained for the relationship between the velocity,v, of subcritical crack growth and the corresponding value ofG _I has been further refined and modelled to account for the presence of fibre bridging.     

Specifying Real-Time Finite-State Systems in Linear Logic (Extended Abstract)

Abstract

Real-time finite-state systems may be specified in linear logic by means of linear implications between conjunctions of fixed finite length. In this setting, where time is treated as a dense linear ordering, safety properties may be expressed as certain provability problems. These provability problems are shown to be in pspace. They are solvable, with some guidance, by finite proof search in concurrent logic programming environments based on linear logic and acting as sort of model-checkers. One advantage of our approach is that either it provides unsafe runs or it actually establishes safety.     

A new quadruple therapy for the eradication of Helicobacter pylori. Effect of pretreatment with omeprazole on the cure rate

The aim of the study was to assess the speech discrimination ability of postlingually deaf adults implanted with the Combi 40 cochlear implant and to compare the results with the postoperative data published for other devices. The postoperative open and closed set speech perception performance of 21 consecutive patients was tested using a standardized test battery comprising a number, monosyllable, sentence, consonant and vowel discrimination test as well as a rhyme test in the sound only condition. Mean values achieved for each test 1, 6 and 12 months after "switch on" were evaluated. The results demonstrate that all patients have a substantial benefit from their implant and show a continuous improvement in their speech perception abilities with increased device experience. The mean percentages of correct answers after 12 months were 93.4 for numbers, 44.6 for monosyllables, 78.5 for sentences, 67.6 for the rhyme test, 59.8 for vowel, and 67.3 for consonant discrimination. Preoperatively, the mean discrimination score for monosyllables was 0%. The speech discrimination scores of our patients were similar or higher than described for similar patient groups implanted with other devices. The high stimulation rate of the implant system using the continuous interleaved speech processing strategy as well as a deep atraumatic electrode insertion into the apicalmost regions of the scala tympani may be the reason for good performance.     

The Somatropin Reference Standard (Control 951) of the National Institute of Health Sciences

Somatropin material was examined for preparation of the "Somatropin Reference Standard". The candidate material was evaluated by a domestic collaborative study in which eight laboratories participated. The protein content was determined to be 4.5 mg/Vial based on amino acid analysis. Because of the possibility of application as a chemical reference standard for assay by the HPLC method, a physico-chemical evaluation of the candidate material was also performed. By SE-HPLC, the content of polymer, dimer were determined to be 0.54%, 0.98%, respectively. By RP-HPLC, the early peak area ascribed to desamido and sulfoxide form was 1.07% of the total peak area. And for informational data, the potency of the candidate material, being estimated by three different biological methods, weight gain assay, tibia test and adiposeconversion assay is 14.8 IU/vial. Based on the above results, the candidate was authorized as the Somatropin Reference Standard of the National Institute of Health Sciences.     

Incremental learning of gestures for human–robot interaction

For a robot to cohabit with people, it should be able to learn people’s nonverbal social behavior from experience. In this paper, we propose a novel machine learning method for recognizing gestures used in interaction and communication. Our method enables robots to learn gestures incrementally during human–robot interaction in an unsupervised manner. It allows the user to leave the number and types of gestures undefined prior to the learning. The proposed method (HB-SOINN) is based on a self-organizing incremental neural network and the hidden Markov model. We have added an interactive learning mechanism to HB-SOINN to prevent a single cluster from running into a failure as a result of polysemy of being assigned more than one meaning. For example, a sentence: “Keep on going left slowly” has three meanings such as, “Keep on (1)”, “going left (2)”, “slowly (3)”. We experimentally tested the clustering performance of the proposed method against data obtained from measuring gestures using a motion capture device. The results show that the classification performance of HB-SOINN exceeds that of conventional clustering approaches. In addition, we have found that the interactive learning function improves the learning performance of HB-SOINN.     

Compact electrostatic levitator for diffraction measurements with a two axis diffractometer and a laboratory x-ray source

A compact electrostatic levitator was developed for the structural analysis of high-temperature liquids by x-ray diffraction methods. The size of the levitator was 200 mm in diameter and 200 mm in height and can be set up on a two axis diffractometer with a laboratory x-ray source, which is very convenient in performing structural measurements of high-temperature liquids. In particular, since the laboratory x-ray source allows a great amount of user time, preliminary or challenging experiments can be performed with trial and error, which prepares and complements synchrotron x-ray experiments. The present small apparatus also provides the advantage of portability and facility of setting. To demonstrate the capability of this electrostatic levitator, the static structure factors of alumina and silicon samples in their liquid phases were successfully measured.     

An efficient Earth Mover's Distance algorithm for robust histogram comparison

We propose EMD-L1: a fast and exact algorithm for computing the Earth Mover's Distance (EMD) between a pair of histograms. The efficiency of the new algorithm enables its application to problems that were previously prohibitive due to high time complexities. The proposed EMD-L1 significantly simplifies the original linear programming formulation of EMD. Exploiting the L1 metric structure, the number of unknown variables in EMD-L1 is reduced to O(N) from O(N2) of the original EMD for a histogram with N bins. In addition, the number of constraints is reduced by half and the objective function of the linear program is simplified. Formally, without any approximation, we prove that the EMD-L1 formulation is equivalent to the original EMD with a L1 ground distance. To perform the EMD-L1 computation, we propose an efficient tree-based algorithm, Tree-EMD. Tree-EMD exploits the fact that a basic feasible solution of the simplex algorithm-based solver forms a spanning tree when we interpret EMD-L1 as a network flow optimization problem. We empirically show that this new algorithm has an average time complexity of O(N2), which significantly improves the best reported supercubic complexity of the original EMD. The accuracy of the proposed methods is evaluated by experiments for two computation-intensive problems: shape recognition and interest point matching using multidimensional histogram-based local features. For shape recognition, EMD-L1 is applied to compare shape contexts on the widely tested MPEG7 shape data set, as well as an articulated shape data set. For interest point matching, SIFT, shape context and spin image are tested on both synthetic and real image pairs with large geometrical deformation, illumination change, and heavy intensity noise. The results demonstrate that our EMD-L1-based solutions outperform previously reported state-of-the-art features and distance measures in solving the two tasks.