Particle characterization and separation by a coupled acoustic-gravity field

A coupled acoustic-gravity field is proposed as a novel external field for particle separation and characterization. When a standing plane ultrasound wave is generated, particles move to the node of the wave along the ultrasound force gradient. If the particles also undergo a sedimentation force, they aggregate at the equilibrium position, where these two forces are balanced. The equilibrium position, which is determined by the density and compressibility of a medium and particles, characterizes the particles. The local ultrasound energy, which is necessary for quantitative discussions, is evaluated by using a standard particle, the physical parameters of which are unambiguously determined; aluminum particles are used in the present study. The local ultrasound energy makes possible the determination of the compressibility of unknown materials. Nonporous particles of inorganic and polymeric materials, the particle sizes of which range from 3 to 100 microm, follow a derived model, suggesting that the local ultrasound energy and a derived model be valid. The proposed external field can be used for separation of particles having different acoustic natures.     

Simultaneous uptake of ammonium and phosphate ions by compounds prepared from paper sludge ash

Al-containing CaO-SiO(2)-H(2)O phases were prepared by hydrothermal treatment of mixtures of paper sludge ash (PSA) with various silica and calcia sources and their properties were determined with particular reference to the simultaneous uptake of ammonium and phosphate ions, which are implicated in the eutrophication of lakes and ponds. After examination of various silica and calcia sources, Ca(OH)(2) and SiO(2) sol were selected as the most appropriate starting materials. Dry milling was found to be superior to wet milling in avoiding contamination from the milling media during mixing. Nine samples with three different Ca/Si ratios and Al(2)O(3) contents were prepared with various mass ratios of Ca(OH)(2), PSA and SiO(2). The chemical compositions of the hydrothermal products of these mixtures moved towards the tieline of CaSiO(3)-PSA, with respect to the starting compositions. The major phase formed in all samples was poorly crystalline C-S-H(I), with hydroxysodalite also formed in the Al-containing mixtures. All the products showed a capacity for the simultaneous uptake of ammonium and phosphate ions. The saturated sorption capacities calculated from the Langmuir equation ranged from 0.9 to 2.4mmol/g for the ammonium ion and from 3.3 to 5.2mmol/g for the phosphate ion. Since the sorption capacities for both ions increased with increasing Ca contents of the product, substitution of Ca(2+) for NH(4)(+) and the formation of calcium phosphate phases such as apatite and brushite by precipitation are thought to be the main sorption mechanisms.     

Microwave-assisted hydrothermal synthesis of zeolite films on ceramic supports

Zeolite films were formed on ceramic supports by a novel microwave-assisted hydrothermal method and were characterized by XRD, SEM, FTIR and BET surface area. The two-stage synthesis technique consists of microwave heating of supports saturated with precursor solution to form a thin layer of zeolite nano-seeds, followed by hydrothermal treatment to crystallize MFI zeolite. The resulting zeolite formation time was drastically reduced and the BET surface area of the product was double that obtained using conventional hydrothermal method. The dipping time, microwave heating time, power and hydrothermal heating time influence the amount of zeolite formation, the BET surface area and preferred orientation of the zeolite film. This new method of seed-film growth using a simple domestic microwave oven has the advantages of a two-stage synthesis technique, allowing independent control of nucleation and crystallization to obtain an optimum zeolite film and reduce the synthesis time.     

Influence of coarse particles on microstructure of aluminum nitride sintered body

Aluminum nitride (AlN) is used for quick diffusion and elimination of heat that is generated from electronic devices, such as power modules used for hybrid cars and micro processing units (MPUs) of computers. AlN provides high thermal conductivity, and it is known that its sintering performance and sintered body characteristics vary with the quality of AlN raw powder. When two types of commercially available AlN raw powder produced by the same reductive nitriding method were compared, the sintering performance and the thermal conductivity of sintered compacts processed from low-price AlN material powder were found to be lower than those of sintered compacts processed from high-price, high-purity, evenly granulated, and fine AlN material powder. As one of the causes of the foregoing, the effect of coarse particles contained in AlN material powder was investigated. The investigation results indicated that the coarse particles were AlN and the powder with the coarse particles removed by sifting out with sieves provided sintering performance and sintering behavior similar to those of high-price and high-purity AlN material powder. It was therefore found that the coarse particle constituted a sintering inhibiting factor. This paper reports the investigation results.     

Analysis of Gibbs monolayer adsorbed at the toluene/water interface by UV-visible partial internal reflection spectrometry

Gibbs monolayers of lipophilic tetraphenylporphyrinatomanganese(III) and hydrophilic diacid of meso-tetrakis(4-sulfonatopheny)porphyrin adsorbed at the liquid-liquid interface have been analyzed by UV-visible external reflection (ER) and partial internal reflection (PIR) spectra measured at different angles of incidence. The angle-dependent ER and PIR spectra over the Brewster angles (thetaERB and thetaIRB) have readily been measured at the toluene/water interface. As preliminarily expected in our previous study, the present study has first proved that the reflection-absorbance of UV-visible PIR spectra quantitatively agrees with the theoretical calculations for the Gibbs monolayer over thetaIRB. In addition, it has also been proved that the absorbance of the PIR spectra is greatly enhanced in comparison to that of the ATR spectra. The enhancement is caused by an optical effect in the monolayer sandwiched between two phases of toluene and water that have different but refractive indices close to each other. This optical enhancement requires an optically perfect contact between the phases, which is difficult to prepare for a solid-solid contact. At the liquid/liquid interface, however, an ideal optical contact is easily realized, which makes the enhancement as much as the theoretical expectation. The PIR spectrometry will be recognized to be a new high-sensitive analytical tool to study Gibbs monolayer at the liquid/liquid interface.     

Fast Calculation of Field Currents and Reactances for Doubly Fed Generators With Rotor Duct Pieces

Doubly fed generators have been used as adjustable-speed pumped-storage generator motors and wind turbine generators. Accurate determination of field currents and reactances is important for the design of these machines. We propose a calculation method to obtain the field currents and reactances of machines with rotor duct pieces under any steady-state balanced load condition. The method links two-dimensional static finite-element analysis (FEA) with an approximate calculation to consider three-dimensional (3-D) skin effect in the duct pieces. Its advantage is that the computational time is much smaller than 3-D transient FEA when the slip frequency is not zero. The method will contribute to improvement of the design of doubly fed generators with rotor duct pieces. It was applied to a 395 MVA machine, and the calculated field currents agreed well with the measurements. Variation in the reactances due to saturation is also discussed     

Study on continuous ice slurry formation using functional fluid for ice storage – Discussion of optimal operating conditions

A functional fluid was made by adding a small amount of additive to a water–silicone-oil mixture with 90 vol% water content, and the functional fluid was transformed into an ice slurry by cooling while stirring. The new ice formation system, which authors proposed for ice storage based on the results of previous studies, demonstrated that the ice slurry could be formed continuously for 10 h. In the current paper, experiments were carried out, varying operating conditions, and an optimal operating condition was determined to improve performance of the present system still more. From the experimental results, the conditions necessary to increase the amount of recovery ice were clarified. The time-dependencies of the shape and size of formed ice particles were also shown. Moreover, the reason why the freezing temperature of the functional fluid rose due to repetition of ice formation was clarified, and its measure was discussed. The present study then found that it was possible to form and recover a larger amount of ice than in previous attempts, given the rise in freezing temperature.     

INITIATION AND GROWTH OF SMALL CRACKS IN DIRECTIONALLY SOLIDIFIED MAR-M247 UNDER CREEP-FATIGUE PART II: EFFECT OF ANGLE NETWEEN STRESS AXIS AND SOLIDIFICATION DIRECTION

This paper deals with the effect of anisotropy on fracture processes of a directionally solidified superalloy, Mar-M247, under a push–pull creep-fatigue condition at high-temperature. Three kinds of specimen were cut from a cast plate such that their axes possess angles of 0°, 45° and 90° with respect to the 〈001〉 orientation that is aligned parallel to the solidification direction (also to the grain boundaries and primary dendrite axis); these specimens being denoted the 0° specimen, the 45° specimen, and the 90° specimen, respectively. The tests were conducted at 1273  K (1000 °C) in air under equal magnitudes of the range of a Δ J -related parameter, Δ W _c , which represents the driving force for crack growth in creep-fatigue. Although the grain boundaries are macroscopically parallel to the solidification direction, they are wavy or serrated microscopically. Small cracks nucleate along parts of the grain boundaries perpendicular to the stress axis in all specimens. The 90° specimen has the shortest crack initiation life and the 0° specimen has the longest. In the 90° and 45° specimens, intergranular cracks continue to nucleate and a main crack is formed along the grain boundary due to the frequent coalescence of small cracks. In the 0° specimen, cracks grow into the grain, and transgranular cracks coalesce along the primary dendrite or grain boundary. The 0° specimen exhibits the slowest crack growth rate and the 90° specimen the fastest. These differences in the initiation and growth behaviour of small cracks cause the longest failure life in the 0° specimen and the shortest in the 90° specimen.     

A phase 2 study of cisplatin in patients with hepatocellular carcinoma

Candida meningitis is a growing problem today. We report a 21-day-old male baby who was a victim of Candida albicans meningitis with the initial presentations of fever, mild stiff neck, poor feeding and activity. He had been treated with intravenous antibiotics and ventilator therapy prior to admission Initially, he was treated as a case of bacterial sepsis after admission with intravenous antibiotics. Due to positive cultures of cerebrospinal fluid for Candida albicans twice, intravenous amphotericin B was started from the 13th hospital day and was continued for 38 days. The successive three sets of CSF fungus culture yielded negative results and the patient was doing well without fever. Meanwhile, the brain sonogram revealed normal findings and he was discharged in a stable condition. We report this case and review some literature in an attempt to know more about this unusual disease, which is becoming more frequent as progress in intensive care grows.     

Partition behavior of tropane alkaloids between organic solvents and water

The partition behavior of tropane alkaloids (TrA) between organic solvent and water was studied under various conditions. The apparent partition coefficient, log P', increases with pH with a slope of +1 in the acidic to neutral pH range, then tends to approach to a constant value in the alkaline region. Thus the partition of TrA to the organic phase is based on the neutral form of TrA. From the pH dependency of the partition and pH titration of TrA, the intrinsic partition coefficients log P0 and pKa values for each TrA were estimated. Values of pKa and log P0 for scopolamine were smaller than those for atropine or homatropine. It was considered that the presence of the epoxide ring in scopolamine molecule reduces the log P0 and pKa because of its polar and electro-inductive effect. It was also expected from the results of pH-dependent partition behavior that in the low pH region some portion of TrA cations is transferred to the organic phase by forming an ion-pair complex with an anion, in the aqueous phase. The log P' of TrA was measured in the presence of various kinds of anions (halides and alkyl sulfonates, C5-C8) at about pH 2, where almost all TrA are present as a protonated form. The relations between the log P' and the logarithmic concentration of anions is linear at low concentrations of anions as expected from the ion-pair partition equation.(ABSTRACT TRUNCATED AT 250 WORDS)