Keratanase II-catalyzed synthesis of keratan sulfate oligomers by using sugar oxazolines as transition-state analogue substrate monomers: a novel insight into the enzymatic catalysis mechanism

Keratan sulfate (KS) oligomers with well-defined structures were synthesized by keratanase II (KSase II)-catalyzed transglycosylation. N-Acetyllactosamine [Galbeta(1-->4)GlcNAc; LacNAc] oxazoline derivatives with sulfate groups at the C-6 (1 a) and both the C-6 and the C-6' (1 b) were prepared as transition-state analogue substrate monomers for KSase II. Monomer 1 a was effectively oligomerized by the enzyme under weak alkaline conditions, to give alternating 6-sulfated KS oligomers (2 a) in good yields, and with total control of regioselectivity and stereochemistry. KSase II also recognized 1 b, which provided fully 6-sulfated KS oligomers (2 b) in good yields under similar conditions. Nonsulfated LacNAc oxazoline was difficult to oligomerize enzymatically. These results imply that the catalysis mechanism of KSase II involves a sugar oxazolinium ion that requires the 6-sulfate group in the GlcNAc residue not only in hydrolysis of KS chains, but also in oligomerization of oxazoline monomers. This is the first report of KSase II-catalyzed transglycosylation to form beta(1-->3)-glycosidic bond through a substrate-assisted mechanism.     

Spray Pyrolysis of Fe3O4–BaTiO3 Composite Particles

Fe₃O₄–BaTiO₃ composite particles were successfully prepared by ultrasonic spray pyrolysis. A mixture of iron(III) nitrate, barium acetate and titanium tetrachloride aqueous solution were atomized into the mist, and the mist was dried and pyrolyzed in N₂ (90%) and H₂ (10%) atmosphere. Fe₃O₄–BaTiO₃ composite particle was obtained between 900° and 950°C while the coexistence of FeO was detected at 1000°C. Transmission electron microscope observation revealed that the composite particle is consisted of nanocrystalline having primary particle size of 35 nm. Lattice parameter of the Fe₃O₄–BaTiO₃ nanocomposite particle was 0.8404 nm that is larger than that of pure Fe₃O₄. Coercivity of the nanocomposite particle (390 Oe) was much larger than that of pure Fe₃O₄ (140 Oe). These results suggest that slight diffusion of Ba into Fe₃O₄ occurred.     

Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

Formation of macroporous organic‐inorganic polymer hybrids using tea extract

Macroporous organic–inorganic polymer hybrids were prepared from poly(vinyl pyrrolidone), and inorganic alkoxides. To a reaction mixture of poly(vinyl pyrrolidone) and tetramethoxysilane, extract from tea leafs and HCl aqueous solution in methanol were added. The resulting mixture was constantly stirred at room temperature for 1 h and heated at 60°C for two weeks. Consequently, the corresponding polymer hybrid became a macroporous material having a pore size from 3.26 to 20.86 μm. We succeeded in finding that the pruned tea leafs were able to utilize the synthesis of novel macroporous materials. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Viscoelastic behavior of poly(butyl methacrylate) densely grafted on silica nanoparticles

A series of poly(butyl methacrylate)s (PBMAs) with various molar masses (33 000–270 000 g mol^?1), which were densely grafted on fumed silica nanoparticles (PBMA–SiO₂), were synthesized by surface‐initiated atom transfer radical polymerization. The dynamic viscoelastic behavior of PBMA–SiO₂ was systematically investigated in the solid and molten states with oscillatory strains, and compared to that of a conventional nanocomposite (PBMA/SiO₂). The storage moduli of PBMA–SiO₂ and PBMA/SiO₂ are equivalent in the solid state, whereas the storage modulus of PBMA–SiO₂ is lower than that of PBMA/SiO₂ in the molten state, especially at high silica loading. This is because the formation of a network structure composed of the silica nanoparticles in PBMA–SiO₂ is strongly suppressed by the polymer brushes on the particles. In contrast, even at low silica loading, the PBMA–SiO₂ system exhibits a gel‐like behavior resulting from a steric repulsion between the composite particles, because all of the tethered polymers behave as bound polymers. Copyright © 2011 Society of Chemical Industry     

Ethanolamine Is a New Anti-Prion Compound

Prion diseases are a group of fatal neurodegenerative disorders caused by accumulation of proteinaceous infectious particles, or prions, which mainly consist of the abnormally folded, amyloidogenic prion protein, designated PrP^Sc. PrP^Sc is produced through conformational conversion of the cellular isoform of prion protein, PrP^C, in the brain. To date, no effective therapies for prion diseases have been developed. In this study, we incidentally noticed that mouse neuroblastoma N2a cells persistently infected with 22L scrapie prions, termed N2aC24L1-3 cells, reduced PrP^Sc levels when cultured in advanced Dulbecco’s modified eagle medium (DMEM) but not in classic DMEM. PrP^C levels remained unchanged in prion-uninfected parent N2aC24 cells cultured in advanced DMEM. These results suggest that advanced DMEM may contain an anti-prion compound(s). We then successfully identified ethanolamine in advanced DMEM has an anti-prion activity. Ethanolamine reduced PrP^Sc levels in N2aC24L1-3 cells, but not PrP^C levels in N2aC24 cells. Also, oral administration of ethanolamine through drinking water delayed prion disease in mice intracerebrally inoculated with RML scrapie prions. These results suggest that ethanolamine could be a new anti-prion compound.     

Biomechanical Evaluation of Ti-Nb-Sn Alloy Implants with a Low Young’s Modulus

Dental implants are widely used and are a predictable treatment in various edentulous cases. Occlusal overload may be causally related to implant bone loss and a loss of integration. Stress concentrations may be diminished using a mechanobiologically integrated implant with bone tissue. The purpose of this study was to investigate the biomechanical behavior, biocompatibility and bioactivity of a Ti-Nb-Sn alloy as a dental implant material. It was compared with cpTi. Cell proliferation and alkaline phosphatase (ALP) activity were quantified. To assess the degree of osseointegration, a push-in test was carried out. Cell proliferation and ALP activity in the cells grown on prepared surfaces were similar for the Ti-Nb-Sn alloy and for cpTi in all the experiments. A comparison between the Ti-Nb-Sn alloy implant and the cpTi implant revealed that no significant difference was apparent for the push-in test values. These results suggest that implants fabricated using Ti-Nb-Sn have a similar biological potential as cpTi and are capable of excellent osseointegration.     

Elastoplastic Finite Element Analysis and Strength Evaluation of Adhesive Butt Joints of Similar and Dissimilar Hollow Shafts Subjected to External Bending Moments

Stress distributions and deformation of adhesive butt joints are analyzed by an elastoplastic finite element method when the joints of similar and dissimilar shafts are subjected to external bending moments. The effects of the ratio of Young's modulus for the adherends to that for an adhesive and the effects of the adhesive thickness on the interface stress distribution are investigated. Joint strength is predicted by using the elastoplastic interface stress distributions. It is found that the singular stress at the edge of the interfaces increases with an increase of the ratio of Young's modulus. Measurement of strains in joints and experiments on joint strength were conducted. The numerical results are in fairly good agreement with the experimental results. It is observed that the joint strength for dissimilar shafts are smaller than those for similar shafts. A fracture of dissimilar adhesive up-bonded shafts occurred from the interface of the adherend with smaller Young's modulus. It is seen that joint strength increases as the adhesive thickness increases.