Effects of lacidipine on serum oxygen free radicals and fasting levels of insulin in patients with essential hypertension

Thirty patients with mild to moderate essential hypertension had received four weeks treatment with Lacidipine and serum lipid peroxide (LPO), superoxide dismutase (SOD) and insulin levels were measured before and after treatment. The results showed: (1) there were decreased in SOD activity and increased Lpo content the patients group (P < 0.01); (2) after treated with Lacidipine, the SOD acitvity increased and Lpo content decreased (P < 0.01); (3) Lacidipine had obvious antihypertensive effect with no significant changes in heart rate; (4) Lacidipine had no significant effects on insulin, blood glucose and lipids. The results suggest that lacidipine is a safe and effective antihypertensive agent and can improve the metabolic balances in free radical system.     

碱解玉米皮制备阿魏酸的研究

通过碱解玉米皮可释放阿魏酸.采用正交设计探讨了碱解和纯化阿魏酸的工艺,其最佳工艺为用含1%Na0H的50%乙醇溶液于85℃回流反应2h提取玉米皮(质量比110)中的阿魏酸.为防止阿魏酸氧化,在提取液中添加50 mg/100 mL的亚硫酸氢钠.将碱解液减压浓缩,用盐酸调节pH至3.0.每次用2倍体积的乙酸乙酯萃取3次,取酯相,减压挥干乙酸乙酯,用碱液溶解,再用盐酸调pH=2,所得产品为黄色油状物.检测结果表明,采用该工艺获得的阿魏酸纯度达82.69%,收率为148.92 mg/10 g玉米皮.     

Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

在ad hoc网络中一种新的节能路由切换模型

提出了一种基于能量消耗的路由切换模型(ERHM),它在路由维护中利用切换技术来使路由的能量消耗最小.仿真结果表明采用切换技术的ERHM模型的能量节省量要比不采用切换技术节约1.5～7.5倍,且节点的移动性越大,能量节约越多.     

柘林电站第二溢洪道砼鼻坎截水墙施工

柘林水电站第二溢洪道,在鼻坎先于下部截墙施工中,为了满足当年泄洪,施工先沿截墙自上而下挖掘交通竖井,支撑牢固,安设好提升设备并打通墙底导洞后,再自下而上分层扩挖及浇筑砼.开挖采用登渣作业,出渣用可伸缩手柄架子车经吊篮提升.墙顶砼浇筑,通过预留在鼻坎内的下料小井进料.     

N-溴丁二酰亚胺／吡啶氧化合成己二酰基双偶氮化合物

以己二酰二氯和不同取代基的苯肼合成了N,N'-二芳基己二酰二肼类中间体,然后在N-溴丁二酰亚胺(NBS)／吡啶氧化体系下室温合成了8种己二酰基双偶氮化合物。第一步反应条件为:n(己二酰二氯):n(取代苯肼)=1:2,反应温度0-5℃,反应时间4 h,收率80%-93％;第二步反应条件为:n(N,N’-二芳基己二酰二肼):n(NBs／吡啶)=1:2,氧化反应时间0．5-1．0 h,收率80%-94%。并用元素分析、IR、1H NMR对合成的中间产物及目标化合物进行了表征。     

薄壁圆管弯曲模设计

对L型薄壁圆管进行了工艺分析，并介绍了弯曲成形的模具结构及工作过程，阐述了划伤，起皱等关键问题的解决方法，并提出了有效的预防措施。     

高性能IGBT模块的设计考虑

本文对ＩＧＢＴ模块中功率芯片（ＩＧＢＴ和续流二极管）的优化设计进行了讨论。通过优化几个重要的工艺参数并改进器件的结构，ＩＧＢＴ不仅有足够的短路容量，而且正向压降与电流下降时间之间可实现最佳折衷。另外，续流二极管的反向恢复特性也有明显改善。通过采用衬底控制技术，ＩＧＢＴ模块的输出特性不受温度的影响，输出电流更稳，输出阻抗更高。本文详细介绍了整个设计考虑。     

Processor Utilization Bounds for Real-Time Systems With Precedence Constraints

This paper presents a novel approach to computing tight upper bounds on the processor utilization for general real-time systems where tasks are composed of subtasks and precedence constraints may exist among subtasks of the same task. By careful analysis of preemption effects among tasks, the problem is formulated as a set of linear programming (LP) problems. Observations are made to reduce the number of LP problem instances required to be solved, which greatly improves the computation time of the utilization bounds. Furthermore, additional constraints are allowed to be included under certain circumstances to improve the quality of the bounds.     

振冲法在砂场地地基处理中的应用

通过对典型振冲挤密法施工方法的研究，分析了该方法的加固机理，指出它可提高地基承载力、减少沉降和不均匀沉降，且能达到地基抗地震、抗液化能力的效果。