Electron traps created in gate oxides by Fowler–Nordheim injections

Two types of electron traps, donor-like and acceptor-like, are created in the gate oxide of metal-oxide-semiconductor capacitors by Fowler–Nordheim electron injections. Electrical properties (areal density, capture cross-section, centroid) of each type of trap are determined by using the avalanche electron injection method and by combining capacitance–voltage and current–voltage measurements. These properties are measured with regard to the Fowler–Nordheim fluence up to breakdown and for both injection modes (electrons injected either from the gate or from the substrate of capacitors).     

Ampacities of power cables wound on reels

This paper presents a mathematical model that is capable of calculating the ampacity of a wide variety of power cable designs consisting of an arbitrary number of layers on a cable reel. The model considers round cables with copper conductors. The validity and accuracy of the ampacity model were verified by comparing the predicted temperature distribution within the reel with measured temperatures collected during an extensive testing program conducted at the US Bureau of Mines (USBM). The mathematical model predicted a temperature distribution within the cable layers that was very close to the measured variation in temperature. The value of the program is illustrated by calculating ampacities for several copper conductor sizes     

Simplified characterization of uniaxial and biaxial nonlinearoptical crystals: a plea for standardization of nomenclature andconventions

Standards which eliminate ambiguity in reporting nonlinear phenomena, especially in the increasingly complex realm of biaxial crystals, are proposed. In order to restore uniformity to the designation of crystallographic axes and crystal tensor properties, adoption of IEEE/ANSI Std. 176, with a small but much needed modification for crystal class mm2, is recommended. For the reporting of nonlinear interaction characteristics, other frames are proposed which result in simpler rules than heretofore given for categorizing phase-matching loci, and for characterizing eigenmode polarizations, double refraction, effective nonlinear coupling, and first- and second-order acceptance bandwidths (angular, spectral, thermal) along these loci. Similarities as well as differences between biaxial and uniaxial crystals are emphasized     

Kinetics of sol-to-gel transition for poloxamer polyols

Kinetics of gelation for aqueous solutions of poloxamers 407 and 288 were determined using pulse shearometry. The principle of this method for determining the shear modulus of a semisolid was based on generation of a torsional force that is transmitted through the poloxamer sample at discrete time intervals. Three distinct linear phases were observed for the log dynamic shear modulus (G′) vs. time profiles as poloxamer 407 and 288 solutions of varying concentrations were allowed to passively warm at room temperature to a temperature exceeding the sol-to-gel transition temperature, T_m. The beginning of the second exponential phase coincided with the onset of the gelation process as determined by visual observation. Although gelation appeared visually to be complete at the beginning of the third exponential phase of the log G′ vs. time profiles, this last exponential phase may indicate the rate of formation of the polymer network. A comparison of poloxamer 407 [30% (w/w); T_m = 10.9°C] and poloxamer 288 [37% (w/w); T_m = 11.1°C] would suggest that the concentration of poloxamer required to achieve approximately the same gelation temperature for poloxamers having a similar ratio of poly(oxypropylene):poly(oxyethylene) units decreases with increasing molecular weight of the poly(oxypropylene) hydrophobe contained in the copolymer. Results of these preliminary studies suggest that the gelation process was significantly (p < .05) more rapid for poloxamer 407 at a 30% (w/w) concentration compared to a 30% (w/w) solution of poloxamer 288 when the poloxamer solutions were allowed to passively warm at room temperature. In addition, it appears that the rate of gelation for the poloxamer solutions studied was dependent on the rate of heat transfer through the polymer solution.     

Scattering of EM waves from a slightly rough surface of a generallyanisotropic plane-layered halfspace

The problem of plane wave scattering by a slightly rough boundary of an arbitrarily layered medium with general anisotropy of electric and magnetic properties is considered using boundary conditions transference method and a small perturbation approximation combined with the Green's functions technique. It is shown that in the Born approximation, the second statistical moments of the fluctuation field scattered from an inhomogeneous anisotropic halfspace can be expressed exclusively in terms of the external parameters referring to a flat boundary and the spectral density of roughness. In the present circumstance, the set of the external parameters includes the four plane-wave reflection coefficients from a flat boundary and the (limiting) values of constitutive parameters of the adjacent media at said boundary, Within the framework of the outlined approach, the covariance dyads, Poynting's vector, scattering coefficients and Stokes parameters of the fluctuation field, and the Mueller matrix for a rough boundary are calculated     

Depth resolution calculations for heavy-ion microbeam RBS analysis

A detailed study has been made on the use of MeV heavy ions (Z₁ = 6–8) for microbeam Rutherford backscattering (RBS) analysis, to improve the depth resolution of this technique. The algorithm for determination of the depth resolution was created and applied to the Zagreb microbeam facility. Theoretical estimates of depth resolution for C and O ion RBS analysis of thin oxide films and semiconductors, using annular silicon surface barrier detector (SSBD), are compared to those for proton backscattering analysis. Depth resolution in certain cases may be improved by increasing the heavy-ion energy. Therefore, by the proper choice of the heavy ion and the heavy-ion energy, the depth resolution may be improved, maintaining the efficiency of the RBS method.     

Thermal/structural dynamic analysis via approximate analytical approach

The present paper uses a classical Galerkin weighted residual formulation to obtain the approximate analytical solution of a thermally loaded beam executing free flexural vibrations. The approach used is one where the time variable is considered in the same manner as the spatial variable, and is included in the basis functions. The basis functions used in the approach are polynomials obtained from the terms of a power series, with the condition of nullity on the boundary. This choice simplifies the algebraic manipulations considerably and yields close form expressions for components of the system matrix. The latter also simplifies the numerical computation of coefficients of the approximating polynomial. The approach provides benefits in terms of increased accuracy and lower computational costs.     

Production and properties of the aging powdered alloy Cu-0.8% Cr. II. Production of electric contacts of aging alloy Cu-0.8% Cr for welding machines by extrusion

Translated from Poroshkovaya Metallurgiya, No. 11(359), pp. 71–73, November, 1992.