A Facile and Green Microwave-Assisted Strategy to Induce Surface Properties on Complex-Shape Polymeric 3D Printed Structures

Light- induced polymeric 3D printing is becoming a well-established fabrication method, showing manifold advantages such as control of the local chemistry of the manufactured devices. It can be considered a green technology, since the parts are produced when needed and with minimum amount of materials. In this work 3D printing is combined with another green technology, microwave-assisted reaction, to fabricate objects of complex geometry with controllable surface properties, exploiting the presence of remaining functional groups on the surface of 3D printed specimens. In this context, surface functionalization with different amines is studied, optimizing formulations, reaction times, and avoiding surface deterioration. Then, two different applications are investigated. MW-functionalized filter-type structures have been tested against Staphylococcus aureus bacteria, showing high bactericidal activity on the surface along all areas of the complex-shaped structure. Second, a fluidic chip composed of three separated channels is 3D printed, filled with different amine-reactive dyes (dansyl and eosine derivatives), and made to react simultaneously. Complete and independent functionalization of the surface of the three channels is achieved only after 2 min of irradiation. This study demonstrates that light induced 3D printing and microwave-induced chemistry can be used together effectively, and used to produce functional devices.     

Increased globotriaosylceramide in familial dysautonomia

Familial Dysautonomia (FD) is an autosomal recessive disease of unknown etiology, occurring primarily in Ashkenazi Jews. Patients are neurologically impaired, with deficits primarily in autonomic and sensory functions. The biochemical and genetic defects have remained elusive, precluding carrier detection and prenatal diagnosis. High-performance liquid chromatography data indicated up to a threefold increase in the neutral glycosphingolipid globotriaosylceramide in Dysautonomic fibroblasts and lymphoblasts. Total ganglioside values, measured by colorimetric, fluorometric or specific sodium borohydride incorporation, were decreased. Affected fibroblasts exhibited a range of pleomorphic phenotypes, such that the usual swirl-like confluent growth pattern of normal fibroblasts was distorted to varying degrees, suggesting abnormalities in the FD plasma membrane, possibly affecting cell-cell contacts. The glycosphingolipid increase could not be accounted for on the basis of markedly decreased α-galactosidase activity, as in Fabry's disease, where patients also display decreased autonomic function.     

Controlling the phase stability of polymer blends through the introduction of impenetrable interfaces

In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003     

The use of magnesium silicate (talc) in a potentiometric sensor for hydrogen ions

The construction and analytical evaluation of a pH sensor based in a matrix containing 20% of [(Mg₆Si₈O₂₀)](OH)₄, a magnesium silicate, talc and 30% graphite dispersed in an epoxy resin (50%) is described. The data obtained from various acid–base titrations were compared with those using a glass electrode in the same conditions. The proposed electrode presented a linear response in the 1–12 pH range with a slope of −39.9±0.3 mV/pH (at 25 °C) and ca. 15 s of response time. The lifetime of this electrode was higher than 8 months (ca. 1500 determinations) and it showed a good performance for pH determination and end-point indication in the potentiometric titrations of acids and bases.     

Oxygen vacancies as a link between the grain growth and grain boundary conductivity anomalies in titanium-rich strontium titanate

Titanium-rich (Sr/Ti?=?0.995) strontium titanate (ST) ceramics, air-sintered in a temperature range of 1400–1625?°C, were reported to possess anomalies in the grain growth and analogous anomalies in the grain boundary (GB) conductivity activation energy. However, these two interface-related phenomena, occurring at GBs, could not be associated with each other using a simple “brick-layer” model. In this work we revise the topic and advocate that the deviation from the model comes from the oxygen vacancies localized at GBs of the rapidly-cooled ST ceramics. To verify this, we annealed the ceramics in oxygen and performed their systematic and comparative analysis using impedance spectroscopy. A levelling-off in the GB conductivity activation energy, which increases for ≤1.24?eV, and a four-fold decrease in the GB permittivity are observed after annealing. Thus, we confirm a key role of oxygen vacancies in relation between the grain growth and GB conductivity anomalies of as-sintered Ti-rich ST ceramics.     

Development of composite membrane PBAT: Zeolite Y for application as rhynchophorol release system

Composite membranes consisting of biodegradable poly(butylene adipate‐co‐terephthalate (PBAT) and zeolite Y (0–10 wt %) were produced by extrusion. Zeolite Y is well dispersed in the membrane up to 5 wt %, but tends to agglomerate at higher contents. The presence of zeolite Y in the composite resulted in an improvement of the thermal stability, mechanical properties, and increased the barrier properties. The interaction of the composite membranes with rhynchophorol was investigated by different techniques, showing that the semiochemical progressively lixiviates PBAT monomers, causing thermal and mechanical properties to decrease. However, no interaction seemed to occur between the rhynchophorol and the zeolite. Studies of diffusion of pheromone through membranes have shown that the addition of the zeolite Y has not contributed significantly to a decrease in the release rate of rhynchophorol, but the presence of the zeolite Y helps to increase chemical, mechanical, and thermal stabilities of the membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45757.     

Oxidative dehydrogenation of propane to propene, 1: Kinetic study on V/MgO

The reaction kinetics of the oxidative dehydrogenation of propane to propene over a V/MgO catalyst were studied. Both propane and propene oxidation kinetics were measured independently to quantify the rates of the parallel and consecutive reactions to propene and carbon oxides. Specific experiments to evaluate reaction products effects showed that water inhibited reaction rates but co‐feeding CO₂ or propene had no measurable effect on selectivity or conversion. Kinetic data generated under integral reactor conditions and over an inert membrane reactor have also been used to estimate the kinetic parameters. Selectivity decreased as the oxygen partial pressure increased; however, propene yield was relatively insensitive to oxygen concentration. A dual site Mars‐van Krevelen model characterizes the reaction kinetics well. The role of lattice oxygen was established by alternating pulses of propane and oxygen. This redox model is able to predict the experimental tendencies observed in the three types of reactor studied.     

A Maternal High Fat Diet Has Long‐Lasting Effects on Skeletal Muscle Lipid and PLIN Protein Content in Rat Offspring at Young Adulthood

A maternal high fat diet (HFD) can have adverse effects on skeletal muscle development. Skeletal muscle PLIN proteins (PLIN2, 3 and 5) are thought to play critical roles in lipid metabolism, however effects of HFD on PLIN and lipases (HSL, ATGL, CGI‐58) in mothers as well as their offspring have yet to be investigated. The primary objective of this study was to determine whether maternal HFD would influence skeletal muscle lipase and PLIN protein content in offspring at weaning (19d) and young adulthood (3mo). Female rats (28d old, n = 9/group) were fed control (CON, AIN93G, 7 % soybean oil) or HFD (AIN93G, 20 % lard) for 10 weeks prior to mating and throughout pregnancy and lactation. All offspring were weaned to CON [n = 18/group, 1 female and 1 male pup per litter were studied at weaning (19d) and 3mo of age]. There was no effect of sex for the main outcomes measured in plantaris, therefore male and female data was combined. Maternal HFD resulted in higher triacylglycerol content in pups at 3mo (p < 0.05), as well as in the dams (p = 0.015). Maternal HFD resulted in higher PLIN5 content in pups at weaning and 3mo (p = 0.05). PLIN2 and PLIN5 content decreased at 3mo versus weaning (p < 0.001). HFD dams had a higher PLIN3 content (p = 0.016). Diet had no effect on ATGL, CGI‐58, or HSL content. In conclusion, exposure to a maternal HFD resulted in higher skeletal muscle lipid and PLIN5 content in plantaris of offspring through to young adulthood.     

Evaluation of Antioxidant,Antidiabetic and Anticholinesterase Activities of Smallanthus sonchifolius Landraces and Correlation with Their Phytochemical Profiles

The present study aimed to investigate the phytochemical profile of leaf methanol extracts of fourteen Smallanthus sonchifolius (yacon) landraces and their antioxidant, anticholinesterase and antidiabetic activities that could lead to the finding of more effective agents for the treatment and management of Alzheimer’s disease and diabetes. For this purpose, antioxidant activity was assessed using different tests: ferric reducing ability power (FRAP), 2,2-diphenyl-1-picryl hydrazyl (DPPH), nitric oxide (˙NO) and superoxide (O₂˙⁻) scavenging and lipid peroxidation inhibition assays. Anticholinesterase activity was investigated by quantifying the acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activities, whereas antidiabetic activity was investigated by α-amylase and α-glucosidase inhibition tests. To understand the contribution of metabolites, phytochemical screening was also performed by high performance liquid chromatography-diode array detector (HPLC-DAD) system. Among all, methanol extract of PER09, PER04 and ECU44 landraces exhibited the highest relative antioxidant capacity index (RACI). ECU44 was found to be rich in 4,5-di-O-caffeoylquinic acid (CQA) and 3,5-di-O-CQA and displayed a good α-amylase and α-glucosidase inhibition, showing the lowest IC₅₀ values. Flavonoids, instead, seem to be involved in the AChE and BChE inhibition. The results of this study revealed that the bioactive compound content differences could be determinant for the medicinal properties of this plant especially for antioxidant and antidiabetic activities.