近十年常温干法精脱硫专利技术发展动态

收集了近十年来国内的常温干法精脱硫专利，并分类列举出各种脱硫剂的物化性质和几种常温精脱硫工艺，重点阐述了该技术的优缺点及其未来发展方向。     

温度对工业汽轮机运行的影响

由于温度的变化，而引起机组热应力的变化，这是工业汽轮机运行中最主要的变化，它对机组的安全和运行影响非常大。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

喷动床反应模型的研究进展

喷动床是一种可实现热量重复循环的高效反应器 .介绍了目前喷动床研究中出现的各种反应模型 ,从等温和非等温两个方面讨论了一维轴向、流管、半分割和流动反应耦合等各类模型的基本思想和理论及各自的特点 ,并提出了进一步发展的方向 .     

Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted.     

Study of the amination of fatty alcohols catalyzed by Cu−Ni catalysts

Amination of fatty alcohols by hydrogenation and dehydrogenation catalysis is one of the main commercial processes for the production of dimethylalkylamines. The key factor in this process is the preparation of catalysts with high selectivity. A study of amination catalyzed by Cu−Ni catalysts supported on CaCO₃ is reported in this paper. Selectivity of the catalysts was adjustable by varying the ratio of Cu to Ni or by adding a third element (Zn or Mg). The promotion of catalyst selectivity was mainly attributable to the effect of the components on the reducibility of Ni²⁺ in the catalysts. Lower reducibility of Ni²⁻ led to higher catalyst selectivity.     

HT-730改性酚醛-丁腈胶粘剂的研制

对酚醛-丁腈胶粘剂进行改性，添加5．0％的硅烷偶联剂，改善了酚醛-丁腈胶粘剂的工艺性能，提高了粘接强度，特别是降低了酚醛-丁腈胶对环境湿度的敏感性。研制的HT-730胶在环境湿度90％时仍有很高的粘接强度，同时老化性能和适用期并没有受到影响。     

透明香皂的研制

介绍了生产透明香皂的新配方和新工艺 ,提出了透明香皂的企业标准。新工艺用丙二醇取代传统工艺所用的乙醇做溶剂 ,生产周期大为缩短。采用速冻隧道设备 ,可方便地实现不同品种的切换 ,操作方便 ,设备投资少 ,产品综合成本低 ,具有较大的工业应用价值     

捣固炼焦在中国焦化工业发展中的前景与展望

介绍了我国炼焦煤源的现状、捣固炼焦的理论依据,并将捣固炼焦技术与常规炼焦方法进行了比较,指出捣固炼焦应向大型化方向发展,并提高捣固和装煤的自动化水平,发展捣固炼焦可促进我国焦化工业的可持续发展。     

A two‐station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers

An embossing strategy involving a hot station and a cold station for sequentially heating and cooling the embossing tool was investigated to reduce cycle times in hot embossing polymer microstructures. Experimental studies showed that aluminum stamps with a thickness of 1.4 mm can be rapidly heated from room temperature to 200°C in 3 s using contact heating against a hot station at 250°C. Microchannels and microlenses were successfully embossed onto high‐density polyethylene and acrylonitrile–butadiene–styrene substrates using a heating time less than 3 s and a total cycle time around 10 s. The two‐station embossing process for the microlens was also numerically studied. The simulated filling behavior agreed with the experimental observation and the predicted thermal and deformation history of the polymer offered a good explanation on the experimentally observed process characteristics. POLYM. ENG. SCI., 47:530–539, 2007. © 2007 Society of Plastics Engineers.