一种可切削玻璃陶瓷的压痕断裂特性

将断裂韧性测试的压痕方法与压痕弯曲方法相结合，独立地分离出了压痕残余应力因子ｘ，使其成为可测参量，并建立了压痕一压痕弯曲的断裂韧性测试方法．将这种方法应用于一种可切削玻璃陶瓷的测试，获得的Ｋ１ｃ值为Ｋ１ｃ＝２．０３ＭＰａ·ｍ１／２，与单边切口法（ＳＥＮＢ）获得的Ｋ１ｃ值有较好的一致性．测得的残余应力因子Ｘ＝０．０９３，符合Ａｎｓｔｉｓ经验公式的预测．     

Rheology in Processing of in Situ Composites of Polypropylene and Low Melting Poing Metals

The low melting point metallic tin powder or alloy of tin and lead was blended with polypropy-lene. A kind of in situ composite has been prepared. The variations of torque were studied when the composites were mixed in Haake torque rheogeniometer. By way of capillary extrusion, effects upon rheology of the in situ com-posites of the low melting point metals (LMPM) and coupling agent for their different variety and content, were investigated. From flow curves, the results indicate that in situ composites mixed with the LMPM are a kind of pseudoplastic fluid. If the LMPM were melted, the higher the content of the LMPM , the lower apparent viscosity of composites. Meanwhile, when the coupling agent is added into composites, the viscosity of composite will go up first and drop then. This shows that the LMPM have a promoter flow action on the polypropylene.     

养马岛大桥钢管拱肋支撑架的设计与施工

介绍了养马岛大桥钢管拱肋支撑架的设计与施工，从设计方案的比选、施工技术等方面进行了论述，指出该桥使用此种支架施工，保证了质量，降低了成本。     

用φ20mm离心萃取器两步法制取高纯钇

本文研究了中钇富镧稀土的氧化物溶液在环烷酸中的萃取行为，测定了镧钇组成、温度变化与分离系数的关系；在Ｐ＿（５０７）体系中研究了ｐＨ值与分配比的关系；提出用环烷酸、Ｐ＿（５０７）两种萃取剂制备高纯钇的工艺流程。用８４台φ２０ｍｍ离心萃取器进行了一个月的台架试验，结果证明两种萃取剂有很好的互补性，在满足钇的纯度要求下有较高收率。离心萃取器具有易分相、体系存留量少、液流密闭性好等优点，它更适宜于粘度大、级数多、产品纯度要求高的体系。     

T cells of the human intestinal lamina propria are high producers of interleukin-10

BACKGROUND: The transmission of hepatitis A virus (HAV) has been associated with the use of a number of solvent/detergent-treated factor VIII concentrates and possibly a factor IX concentrate. These reports have emphasized the necessity of using virus-inactivation methods for plasma products that are capable of inactivating nonenveloped viruses such as HAV. STUDY DESIGN AND METHODS: A simple, highly accurate titration procedure for HAV, which allows extensive kinetic investigations of virus-inactivation procedures, has been developed. This system has now been used to evaluate the efficacy of vapor heating in inactivating HAV after the addition of the virus to a range of human plasma products. RESULTS: It was demonstrated that HAV was significantly more thermostable than other picornaviruses, which reinforced the fact that such viruses cannot be used as model viruses for HAV-inactivation studies. A one-step vapor-heating procedure was demonstrated to inactivate between 5.9 and > 6.3 log10 of HAV in different products. A two-step vapor-heating procedure had the capacity to inactivate between > 8.7 and > 10.4 log10 of HAV. Both procedures were more effective in inactivating HAV than was the pasteurization procedure used for virus inactivation in human albumin solutions. CONCLUSION: These data demonstrate the efficacy of vapor heating in inactivating high-titer HAV after the spiking of plasma products with virus. This study confirms and explains the results of controlled clinical trials and long-term clinical usage with respect to the lack of HAV transmission by such vapor-heated products.     

钇铁石榴石薄膜材料的光吸收谱及Bi,Al掺入对谱的影响研究

采用单离子晶场跃迁模型，拟合出钇铁石榴石（ＹＩＧ）薄膜材料的光吸收谱，与实验谱吻合得较好。从实验和理论上分析了（ＢＩＡＩ）ＹＩＧ 薄膜材料的光吸收谱，结果表明，Ａｌ３＋离子的作用如同稀释剂一样，减小了光吸收，Ｂｉ３＋离子由于其强的自旋轨道耦合作用，增大了跃迁振子强度和跃迁线宽，从而增大了光吸收损耗，在此基础上所作的（ＢｉＡｌ）ＹＩＧ的理论谱与实验谱符合得较好。     

Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

步进式加热炉炉温优化设定模型及软件开发

针对线材厂步进式加热炉实际工况，提出了基于经验规则的炉温优化设定模型和在线自学习获取知识的思想，并以炉温优化设定模型为核心，开发出加热炉计算机控制系统的优化运行软件。     

三氯乙烯与糠醛水溶液的液液平衡及萃取模拟计算

本文采用液液平衡釜了糠醛水溶液与三氯乙烯的液液平衡数据，用ＵＮＩＱＵＡＣ方程关联糠醛－水－三氯乙烯体系的液液平衡数据，以ＵＮＩＱＵＡＣ方程的模型，采用液液萃取法模拟计算糖醛和水的分离结果。