0.27-dB/km attenuation achieved by MSP preform process [opticalfibers]

Mechanically shaped preforms (MSP) have been demonstrated to combine economic non-CVD (chemical vapor deposition) processing and low loss, with a published value of 0.63 dB/km and a size of 30 fkm/preform. Improved processing is proposed which results in a minimum loss of 0.27 dB/km at 1550 nm. Preforms capable of yielding 150 fkm have been produced. Reboiling during preform stretching and fiber pulling is identified as the last remaining problem of the process     

An experimental study of non-newtonian fluid flow in fluidized beds: minimum fluidization velocity and bed expansion characteristics

In this work, new experimental measurements of the minimum fluidization velocity and velocity-voidage characteristics are reported for a variety of liquid-particle systems in glass columns of two different diameters. Three types of liquids, namely, Newtonian, visco-inelastic, and visco-elastic fluids, were used to fluidize the beds of glass particles of four different sizes (1.27–15.8 mm). The results obtained with Newtonian liquids conform to the expected behaviour. The applicability of a variety of equations has been examined with a view to predicting the values of the minimum fluidization velocity and fluidization index for non-Newtonian systems. The experimental results reported herein embrace the following ranges of conditions: 1.27 < D_p < 15.8 mm; D_T = 50.8 and 101.6 mm, and 0.382 n 1.00.     

Elastic and Magnetoelastic Properties of an Iron–Carbon Powder Steel

The resonance frequency, internal friction, and emf of the double conversion are measured in samples of ZhGr steels of the variable density and carbon content by means of the resonance electromagnetic-acoustic conversion method. For the contactless excitation, the close correlation between the density (porosity) and the resonance frequency of the ultrasonic vibrations is obtained. It is shown that the magnetic state of the samples affects the internal friction. The dynamics of the field dependences of the emf is investigated with allowance for the internal friction in variation of the carbon content. This makes it possible to determine the optimum interval of the field for estimating this parameter.     

Supergain antennas: possibilities and problems

In principle, any desired amount of gain can be developed from an antenna of arbitrary size. The phenomena of high gain from very small antennas is called “supergain”. To see why this statement might be so, the author recalls the construction used in optics, known as Huygens' principle. This states that every point on a wavefront can be regarded as a source of radiation. At the end of a short period of time, the envelope of all of these individual wavelets forms the new wavefront. For example, this construct explains why a shadow is not perfectly sharp, and why interference fringes form. End fire antennas, dipole antennas, Yagi antennas and quad antennas are examined     

Experience in developing ultrahigh capacity compressor stages

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 2, pp. 4–7, February, 1992.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Doubly resonant Ti:sapphire laser

A CW Ti:sapphire laser that operates simultaneously at two frequencies is described. This mode of operation was obtained with an intracavity dispersive prism and two separate feedback paths. An alternative means of achieving dual frequency operation was demonstrated using a birefringent filter. Repetitive Q-switching produced an increase in the range of wavelengths over which dual frequency operation was obtained     

Studies on elemental tellurium under high pressure

A non-linear behaviour in the resistance of tellurium as a function of pressure has been observed. At each pressure the resistance shows a time variation. At lower pressures, the normalized resistance increases with time, and at higher pressures, the normalized resistance decreases exponentially as a function of time. This change in behaviour with respect to time occurs in the region of the steepest descent in the resistance versus pressure plot. However, the magnitude of the change in the resistance with time is small compared to a change in the resistance with pressure. The origin of this behaviour is suggested to be linked with the generation and annealing of localized charged defects. This revised version was published online in November 2006 with corrections to the Cover Date.     

Bioceramics

Ceramics, glasses, and glass-ceramics are increasingly being tested for use in the human body. These materials often have excellent chemical properties for biomedical use, but they are brittle and show fatigue. Careful analysis of their mechanical properties is needed to determine appropriate applications. Hydroxylapatite is emerging as the most promising bioceramic because it shows no foreign body reactions and bonds strongly to bone; if properly made without pores or second phases it has excellent fatigue resistance. Glass-ceramics containing hydroxylapatite crystals also show good promise for many applications. Different forms of these materials, such as dense, granular, mixed granular with plaster of Paris, and coatings on metals are being tested and have very good potential as bioceramics.