Calorimetric output power measurements on a CW 20 kW 7.16 GHzmicrowave transmitter

A calorimetric measurement technique developed for NASA's Deep Space Network (DSN) transmitters that does not require data on the coolant's thermal parameters is described. Calibration of the measurement system is achieved by measuring the DC input power to the klystron and relating coolant temperature increase to this known power dissipation. Agreement between calorimetric and electrical measurements of total system power was good, the difference being less than 2%. The operation of the system was not greatly affected by the composition of the coolant, which was varied from pure water to 40% ethylene glycol by mass. Good accuracy was also shown at output power levels, which varied over a 3.6:1 range     

Strategy for olive mill wastewater treatment and reuse with a sewage plant in an arid region.

This study was conducted to evaluate the treatability of OMW (olive mill wastewater) with sewage and sewage sludge, which could supplement nutrients and microbes required for OMW treatment and reduce its possible toxicity. The amount of OMW added to an aeration tank was based on the loading difference between the designed and actual COD loads, while the amount added to anaerobic digestion for energy recovery was determined by CH4 production. The COD removal efficiencies were 70-85% for both systems. Compost of OMW with dried sewage sludge also showed a similar temperature profile without OMW addition. This strongly suggested that OMW can be treated at a sewage plant without pretreatment and the treated effluent can be reused in irrigation for an arid region.     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.     

Glass ceramics with controllable pore structure for medicine

The conditions for synthesis of porous biocomposite materials based on calcium phosphate for fabricating implants with prescribed pore-structure parameters, and the desired level of physical, chemical, and biological properties for clinical applications are determined. The role of a bimodal pore structure in the substrate materials for cell cultures is shown. __________ Translated from Steklo i Keramika, No. 4, pp. 23–26, April, 2007.     

Assessing the performance of intumescent coatings using bench‐scaled cone calorimeter and finite difference simulations

A method was developed to assess the heat insulation performance of intumescent coatings. The method consists of temperature measurements using the bench‐scaled experimental set‐up of a cone calorimeter and finite difference simulation to calculate the effective thermal conductivity dependent on time/temperature. This simulation procedure was also adapted to the small scale test furnace, in which the standard time–temperature curve is applied to a larger sample and thus which provides results relevant for approval. Investigations on temperature and calculated effective thermal conduction were performed on intumescent coatings in both experimental set‐ups using various coating thicknesses. The results correspond to each other as well as showing the limits of transferability between both fire tests. It is shown that bench‐scaled cone calorimeter tests are a valuable tool for assessing and predicting the performance of intumescent coatings in larger tests relevant for approval. The correlation fails for processes at surface temperatures above 750°C, which are not reached in the cone calorimeter, but are attained in the small scale furnace set‐up. Copyright © 2006 John Wiley & Sons, Ltd.     

Relative Protein Efficiency Ratios for Wheat-Based Breakfast Cereals

Male weanling rats were subjected to standard 28-day PER trials following the outline by the AOAC (1984) except that the diets contained 8.5% protein (N × 6.25) as one of six wheat-based breakfast cereals, white flour, whole wheat flour or casein. One of the cereals was an extrusion puffed product, three were flaked and toasted cereals and two were extruded cereals. Of the two extruded cereals, one was lightly toasted and the other was more heavily toasted. Relative PER (R-PER) was lowest for the puffed cereal (- 15.3) and highest for the extruded-lightly toasted cereal (69.9). R-PER for the flaked cereals ranged from 1.7 to 16.3; the other extruded cereal had a R-PER of 2.8 and each of the two flours had a R-PER of 42.9.