Binary blends of metallocene polyethylene with conventional polyolefins: Rheological and morphological properties

The rheology and morphology of four sets of binary blends of polyethylene synthesized with metallocene catalysis (metallocene polyethylene: MCPE) with polyolefins prepared using Ziegler‐Natta catalysts have been investigated. The blend systems are MCPE with high density polyethylene (MCPE‐HDPE), polypropylene (MCPE‐PP), poly(propylene‐co‐ethylene) (MCPE‐CoPP), and poly(propylene‐co‐ethylene‐co‐1‐butylene) (MCPE‐TerPP). Cole‐Cole plots [storage melt viscosity (η′) versus loss melt viscosity (η″)], plots of the dynamic storage modulus (G′) versus the dynamic loss modulus (G″), and plots of the log melt viscosity (η*, η′, and η″) versus blend compositions were constructed. The morphology of the blends after microtoming and etching was studied. The phase morphology of MCPE‐HDPE appeared homogeneous, whereas the other three blends were heterogeneous. Rheological and morphological investigations indicated that the MCPE‐HDPE blend was miscible, but the other three blends were immiscible in the melt as well as in the solid state. These observations can be rationalized in terms of the similarity of the chemical structures of the polyolefins.     

Blends of ethylene 1‐octene copolymer synthesized by Ziegler–Natta and metallocene catalysts. II. Rheology and morphological behaviors

The rheological and morphological behaviors of commercially available three binary blends of ethylene 1‐octene copolymer (EOC) regarding the melt index (MI), density and comonomer contents, one component made by the Ziegler–Natta and the other by the metallocene catalysts, were investigated to elucidate miscibility and phase behavior. Miscibility of the EOCs blend in a melt state was related to the value of the MI, density, and comonomer content. If the comonomer contents are similar, then the melt viscosity is weight average value, otherwise it is positively or negatively deviated. The microtomed surface prepared by two different cooling processes—one is fast cooling and the other is slow cooling—indicated that all the blends were not homogenous regardless the density, MI, and comonomer content. The Ziegler–Natta catalyzed EOCs exhibited bigger spherulitic diameter and larger ring space than those of the metallocene EOCs prepared by a cooling process. The blends consisting of similar MI showed banded spherulites with different diameter, whereas the blend consisting of different MI and density takes place of explicit phase separation and phase inversion at 1 : 1 blend composition. The melt rheology appeared to influence the mechanical and film properties in the solid state. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1950–1964, 2000     

Electropolymerization kinetics of a binary mixture of pyrrole and o‐aminobenzoic acid and characterization of the obtained polymer films

Poly (pyrrol‐co‐o‐aminobenzoic acid) has been synthesized electrochemically from an aqueous acid medium. The initial rate of electrocopolymerization reaction on platinum electrode is small and the rate law is: Rate = K₂ [D]^1.02[HCl] ^1.44[M]^2.00. The apparent activation energy (E_a) is found to be 90.11 kJ mol^?1. The polymer films obtained have been characterized by cyclic voltammetry, X‐ray diffraction, elemental analysis, thermogravimetric analysis, scanning electron microscopy, ¹H NMR, and IR‐spectroscopy. The mechanism of the electrochemical polymerization reaction has been discussed. The monomer reactivity ratios (r₁ and r₂) were calculated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Short jute fiber‐reinforced polypropylene composites: Dynamic mechanical study

Short jute fiber‐reinforced polypropylene (PP) composites were prepared using a high‐speed thermokinetic mixer. A compatibilizer was used to improve the molecular interaction between jute and PP. Both the percent weight fraction of the jute fiber and compatibilizer were varied to study the dynamic mechanical thermal (DMT) properties. Dynamic parameters such as storage flexural modulus (E′), loss flexural modulus (E″), storage shear modulus (G′), loss shear modulus (G″), and loss factor or damping efficiency (tan δ) were determined in a resonant frequency mode. The transition peak nature, amplitude, and temperature of E′, E″, G′, G″, and tan δ of different compositions were shown to indicate possible improvements of molecular interaction in the presence of a compatibilizer. The modulus retention term, a plot of the reduced modulus with the weight fraction of the jute fiber, also indicate its improvement. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 531–539, 1999     

The effect of modifying an edge-plane pyrolytic graphite electrode with single-wall carbon nanotubes on its use for sensing diclofenac

A simple and highly sensitive sensor based on edge-plane pyrolytic graphite electrode (EPPGE) coated with single-wall carbon nanotubes is proposed for diclofenac determination in nanomolar concentrations. The oxidation of diclofenac occurred in two well-defined peaks having peak potentials ∼439 and ∼854 mV at pH 7.2. The modified electrode showed excellent catalytic activity presenting much higher peak currents than those measured on a bare EPPGE. Under the optimum conditions, the calibration curve was linear in the concentration range 1 × 10⁻⁹-500 × 10⁻⁹ M and 25 × 10⁻⁹-1500 × 10⁻⁹ M for peaks I and II, respectively. The limit of detection for peaks I and II was found as 0.82 × 10⁻⁹ and 22.5 × 10⁻⁹ M, respectively. The developed sensor was applied for the determination of diclofenac in biological and pharmaceutical samples using square-wave voltammetry and the validation of results using high performance liquid chromatography showed excellent agreement.     

A bio-inspired gelatin-based pH- and thermal-sensitive magnetic hydrogel for in vitro chemo/hyperthermia treatment of breast cancer cells

Gelatin (Gel)-based pH- and thermal-responsive magnetic hydrogels (MH-1 and MH-2) were designed and developed as novel drug delivery systems (DDSs) for cancer chemo/hyperthermia therapy. For this goal, Gel was functionalized with methacrylic anhydride (GelMA), and then copolymerized with (2-dimethylaminoethyl) methacrylate (DMAEMA) monomer in the presence of methacrylate-end capped magnetic nanoparticles (MNPs) as well as triethylene glycol dimethacrylate (TEGDMA; as crosslinker). Afterward, a thiol-end capped poly(N-isopropylacrylamide) (PNIPAAm-SH) was synthesized through an atom transfer radical polymerization technique, and then attached onto the hydrogel through “thiol-ene” click grafting. The preliminary performances of developed MHs for chemo/hyperthermia therapy of human breast cancer was investigated through the loading of doxorubicin hydrochloride (Dox) as an anticancer agent followed by cytotoxicity measurement of drug-loaded DDSs using MTT assay by both chemo- and chemo/hyperthermia-therapies. Owing to porous morphologies of the fabricated magnetic hydrogels according to scanning electron microscopy images and strong physicochemical interactions (e.g., hydrogen bonding) the drug loading capacities of the MH-1 and MH-2 were obtained as 72 ± 1.4 and 77 ± 1.8, respectively. The DDSs exhibited acceptable pH- and thermal-triggered drug release behaviors. The MTT assay results revealed that the combination of hyperthermia therapy and chemotherapy has synergic effect on the anticancer activities of the developed DDSs.     

Three Dimensional Conceptualisation of Hydrogeological Environment to Underpin Groundwater Management in Irrigation Area

Australian irrigated agriculture utilises about 70?% of all water used in the country, 21?% of which is derived from groundwater. Sustainability for irrigated agriculture also depends on keeping the watertables at a safe level below the rootzone to avoid salinisation and reduction in crop yields. There is a vital need to understand groundwater and aquifer systems and their roles in the sustainability of irrigated agriculture in order to manage groundwater properly. This study builds on the previous hydrogeological and groundwater investigations of the Coleambally Irrigation Area (CIA) in New South Wales of Australia. It presents a new approach which systematically characterises regional hydrogeological environment using a three-dimensional (3-D) conceptual framework developed in ArcGIS. The 3-D hydrological conceptualisation of the CIA has integrated disparate sources of data into a coherent knowledge base for a better visualisation of hydrogeological characteristics and a comprehensive analysis of groundwater flow and aquifers. As an application example, the model was used to develop cross-sectional models of the area and to estimate regional-scale net recharge. The results have provided a basis for the numerical modelling and added values to procedures which underpin irrigation system management investment decisions through improving the understanding of hydrogeology underlying the area and creating an action-oriented dialogue among stakeholders.     

Crop Reference Evapotranspiration: A Discussion of the Concept,Analysis of the Process and Validation

The study at first recalls the concept of “potential evapotranspiration” (PET), originally considered equal to the evaporation climatic demand; then, it reminds the steps of its progressive evolution toward the concept of “reference crop evapotranspiration” (ET₀) determined on irrigated grass. A physical analysis conducted on the evaporation process is subsequently reported to help clarifying the links between ET₀ and evaporation climatic demand. This analysis clearly demonstrates that the equivalence of ET₀ to evaporation climatic demand is not correct, although still common assumption in recent scientific literature, particularly in hydrology. The study also identifies two processes acting in opposite directions in the dynamics of ET₀: (1) the climatic variables determining the evaporation demand, and (2) the canopy resistance which slows down the response of irrigated grass to such demand. The analysis of the respective impact of these two processes on ET₀ dynamics shows that the available energy is the dominant process. This variable takes into account the 60–70% of the variation of ET₀, both at hourly and daily scales, while canopy resistance only explains 10–20% of ET₀ variation of irrigated grass. The study regards different climatic situations. Possible effects on practical applications were also discussed in the conclusions, together with comments on the correct canopy resistance modelling.