Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Molecular simulation for adsorption of chlorinated hydrocarbon in zeolites

Equilibrium and isosteric heat of adsorption for the system of chloroform and USY-type zeolite were studied. The USY-type zeolite (PQ Co., SiO₂/Al₂O₃=70) was used both as a pure crystalline powder and as granulated particles with binder. Chloroform was reagent grade. The adsorption equilibria were measured using a gravimetric method and were expressed as isotherms. A chromatographic method (i.e. pulse response of chloroform through the USY column with helium carrier) was used to get the initial slope of the isotherms. In the simulation, the GCMC method was used to calculate amounts adsorbed for various conditions. FF parameters were confidently applied. And modified structure model was effective for simulation. This paper was presented at The 5th International Symposium on Separation Technology-Korea and Japan held at Seoul between August 19 and 21, 1999.     

Classification of Geothermal Energy Resources in Japan Applying Exergy Concept

Higher demand for energy consumption and importance of environmental issues has encouraged researchers and policy makers to consider renewable energies more seriously. Geothermal resources are a green energy source that can make a considerable contribution in some countries. Japan has the third ranking geothermal energy potential, and its geothermal electricity production is currently eighth in the world. Since the nature of geothermal resources dictates its method of utilization, it is important to categorize available resources. There is no consensus on classification of geothermal resources. Most scientists, from geologist to engineers, agree on the term temperature. However, temperature or enthalpy alone cannot describe the nature of fluids; they can have same temperature with different phases, such as saturated water or saturated steam. Using exergy for resource classification benefits their comparison, according to their ability to do work. In this paper, exergetic classification of geothermal resources was applied to 18 under‐operating geothermal power plants in Japan. Six geothermal fields have high exergy resources according to their SExI values in excess of 0.5. The remaining geothermal fields in Japan are classified in the medium resources zone. Classification results can be used by decision makers as a reference for future geothermal development. Copyright © 2012 John Wiley & Sons, Ltd.     

Study of drive system for linear induction motor using magnetic energy recovery switch

This paper proposes a power supply suitable for driving linear induction motors. The power supply consists of a voltage source inverter (VSI) and a magnetic energy recovery switch (MERS). Circuit configuration and operation principles of the power supply are described. Power factor correction by MERS can increase the output power. Technical advantages of using MERS compared with increasing the rated voltage of VSI are discussed. Some experiments with a linear induction motor were conducted. The results confirm that MERS can reduce the capacity of the VSI or increase the output with the same VSI capacity. The number of devices and magnitude of losses are evaluated on a large‐scale drive system. A half‐bridge type of MERS is provided and discussed. The half‐bridge MERS mitigates disadvantages of using MERS. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 169(4): 65–74, 2009; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20832     

Low Temperature Magnetization of Two Dimensional 3He on Three Layers of HD Preplated Graphite

We have measured the low temperature magnetization of submonolayer ³He on three layers of HD preplated graphite. NMR measurement has been performed by progressively adding ⁴He to the system, to prevent ³He atoms from being trapped in substrate heterogeneities and to change the areal density of ³He. The exchange constant (J) is found to have a similar density dependence to that for two layers of HD preplated one. The magnetization in the antiferromagnetic region increases gradually down to 100 K and shows no evidence corresponding to a spin gap.     

A novel DNA polymerase family found in Archaea

One of the most puzzling results from the complete genome sequence of the methanogenic archaeon Methanococcus jannaschii was that the organism may have only one DNA polymerase gene. This is because no other DNA polymerase-like open reading frames (ORFs) were found besides one ORF having the typical alpha-like DNA polymerase (family B). Recently, we identified the genes of DNA polymerase II (the second DNA polymerase) from the hyperthermophilic archaeon Pyrococcus furiosus, which has also at least one alpha-like DNA polymerase (T. Uemori, Y. Sato, I. Kato, H. Doi, and Y. Ishino, Genes Cells 2:499-512, 1997). The genes in M. jannaschii encoding the proteins that are homologous to the DNA polymerase II of P. furiosus have been located and cloned. The gene products of M. jannaschii expressed in Escherichia coli had both DNA polymerizing and 3'-->5' exonuclease activities. We propose here a novel DNA polymerase family which is entirely different from other hitherto-described DNA polymerases.     

Preparation of new redox-active polyionenes with porphyrin units in the main chain

Quaternization of trans-dipyridylporphyrin with 1,4-butaneditrifluoromethane-sulfonate affords new polyionenes containing porphyrin units in the main chain. The polymers exhibit chemical and electrochemical reversible redox activities. Weitz-type two-step redox processes similar to those of viologens account for the redox properties of the polymers. Received: 26 November 1996/Revised: 24 January 1997/Accepted: 10 February 1997     

日本可再生能源与智能配电网的技术进展

简单介绍了日本可再生能源计划,并分析新能源应用过程中可能遇到的问题及解决方案。讨论在大规模引入风能与太阳能后对日本主电网的影响及应对方法。最后,通过几个工程实例介绍了新能源与智能电网在日本发展的最新成果。     

Demonstration of a fully spatial coherent X-ray laser at 13.9 nm

We have recently reported the successful development of a fully coherent X-ray laser (XRL) at 13.9 nm by an oscillator-amplifier configuration with two targets. In the experiment, a seed XRL beam from the first target is injected into a plasma amplifier at the second target. The observed XRL beam has full spatial coherence and 0.2 mrad of nearly diffraction-limited divergence. In order to improve the output fluence, the amplification properties of the XRL beam have been investigated using various plasma lengths of the second amplifier target. The output energy has been improved by a factor of ten, increasing the length of the gain region to 10 mm, resulting in about 0.2 /spl mu/J of output energy.