Optimizing the design of large-scale ground-coupled heat pump systems using groundwater and heat transport modeling

In order to predict the long-term performance of large-scale ground-coupled heat pump (GCHP) systems, it is necessary to take into consideration well-to-well interference, especially in the presence of groundwater flow. A mass and heat transport model was developed to simulate the behavior of this type of system in the Akita Plain, northern Japan. The model was used to investigate different operational schemes and to maximize the heat extraction rate from the GCHP system.     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

Characterization of plasma membrane H+-ATPase from salt-tolerant yeast Candida versatilis

Plasma membrane was isolated from the salt-tolerant yeast Candida versatilis and the ATPase in plasma membrane was characterized. The ATPase was a typical H⁺-ATPase with similar properties to the Saccharomyces cerevisiae and Zygosaccharomyces rouxii enzymes. It was reacted with antibody (IgG) raised against S. cerevisiae plasma membrane H⁺-ATPase. The ATPase activity was not changed by adding NaCl and KCl to the assay solutions, but was increased by NH, especially by ammonium sulfate. In vivo stimulation of ATPase activity was observed by the addition of NaCl into the culture medium, as observed in Z. rouxii. No in vivo activation of H⁺-ATPase by glucose metabolism was observed in C. versatilis cells and the activity was independent of the growth phase, like Z. rouxii and unlike S. cerevisiae cells.     

The use of intraoperative ultrasonography for detecting tumor extension in bile duct carcinoma

This study examined the intraoral changes of the elastic properties and roughness of a tissue conditioner after treatment with a fluorinated copolymer coating agent developed by the authors. The surface of the conditioner was treated with the agent on half of the internal surface of five maxillary complete dentures and was compared with the untreated half on the other side. The cushioning effects of the conditioners were evaluated by measuring the creep compliance strain-to-stress ratio. The value of compliance on the treated half was significantly greater than that on the untreated half. There was significantly less roughness on the treated side than on the untreated side. It was found that the coating provides an improved, glossy surface to the conditioner and may increase its useful life.     

Contemporary percutaneous treatment of unprotected left main coronary stenoses: initial results from a multicenter registry analysis 1994-1996

BACKGROUND: Coronary artery bypass surgery (CABG) has been considered the therapy of choice for patients with unprotected left main (ULMT) coronary stenoses. Selected single-center reports suggest that the results of percutaneous intervention may now approach those of CABG. METHODS AND RESULTS: To assess the results of percutaneous ULMT treatment from a wide variety of experienced interventional centers, we requested data on consecutive patients treated after January 1, 1994, from 25 centers. One hundred seven patients were identified who were treated either electively (n=91) or for acute myocardial infarction (n=16). Of patients treated electively, 25% were considered inoperable, and 27% were considered high risk for bypass surgery. Primary treatment included stents (50%), directional atherectomy (24%), and balloon angioplasty (20%). Follow-up was 98.8% complete at 15+/-8 months. Results varied considerably, depending on presentation and treatment. For patients with acute myocardial infarction, technical success was achieved in 75%, and survival to hospital discharge was 31%. For elective patients, technical success was achieved in 98.9%, and in-hospital survival was strongly correlated with left ventricular ejection fraction (P=.003). Longer-term event (death, infarction, or bypass surgery) -free survival was correlated with ejection fraction (P<.001) and was inversely related to presentation with progressive or rest angina (P<.001). Surgical candidates with ejection fractions > or = 40% had an in-hospital survival of 98% and a 9-month event-free survival of 86+/-5%, whereas patients with ejection fractions < 40% had 67% and 22+/-12% in-hospital and 9-month event-free survivals, respectively. Nine hospital survivors (10.6%) experienced cardiac death within 6 months of hospital discharge. CONCLUSIONS: While results for selected patients appear promising, until early post-hospital discharge cardiac death can be better understood and minimized, percutaneous revascularization of ULMT stenosis should not be considered an alternative to bypass surgery for most patients. When percutaneous revascularization of ULMT is required, directional atherectomy and stenting appear to be the preferred techniques, and follow-up angiography 6 to 8 weeks after treatment is probably advisable.     

Radiographic analysis of hallux valgus in women on weightbearing and nonweightbearing

To investigate changes in the radiographic appearance during weightbearing in hallux valgus and to examine the importance of a weightbearing view, a comparative study was performed of accurate dorsoplantar radiographs of 108 symptomatic hallux valgus feet in 73 female patients and 100 normal feet in 69 females, which were taken weightbearing and nonweightbearing. The hallux valgus angle in the hallux valgus group increased on weightbearing, whereas that in the normal group decreased. The intermetatarsal angle between the first and second metatarsals increased on weightbearing in both groups. The degree of the changes of the angles was closely related with the degree of the hallux valgus deformity. The intermetatarsal angle between the fourth and fifth metatarsals decreased on weightbearing in the both groups. A weightbearing view is necessary to evaluate the structural configuration of hallux valgus, because muscle imbalance around the first metatarsophalangeal joint in hallux valgus causes an increase of a hallux valgus angle on weightbearing.     

Characterization of plasma membrane proton-ATPase from salt-tolerant yeast Zygosaccharomyces rouxii cells

Plasma membrane was isolated from the salt-tolerant yeast Zygosaccharomyces rouxii and from Saccharomyces cerevisiae. The ATPase in the plasma membrane of Z. rouxii cells was a typical proton-ATPase as judged by testing with various ATPase inhibitors. There were slight differences in the pH optima of activities and in the sensitivity to sodium chloride (NaCl) and potassium chloride (KCl) of the ATPase from Z. rouxii and S. cerevisiae. The specific ATPase activity from Z. rouxii was higher in cells grown in a medium containing 2 _M-NaCl than in those not containing NaCl. No in vivo activation by incubation with glucose was observed in Z. rouxii cells and the specific ATPase activity was independent of the growth phase, unlike S. cerevisiae cells.     

Development of a city‐type compact wind power generation system

It is necessary to use renewable energy, such as photovoltaic, wind power, and biomass energy, from the viewpoint of CO₂ regulation and environmental protection of the Earth. In recent years, the tendency is toward larger wind power generation systems to achieve cheaper electricity. Generators having capacities of 1500 kW to 2000 kW tend to dominate the market. However, a large wind power generation system has limitations in terms of location and can be installed only in the suburbs. At the same time, a city‐type compact wind power generation system, designed for city needs, has more flexibility and can be installed in the residential areas of a city. In this paper, we introduce an original control operation system called a “pump‐up” operation system, designed to effectively use the city wind, and report the results of its field test. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 158(2): 56–63, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20440     

Low-Thermal-Expansion Properties of Sodium- and Lithium-Substituted Cubic Cesium Leucite Compounds

Cubic cesium leucite-based compounds, namely cesium leucites, cesium sodium leucites, and cesium lithium leucites, were synthesized using a multistep solid-state reaction method. The thermal expansion properties, in the temperature range of 298-1273 K, for the synthesized cubic cesium leucite-based compounds were examined using high-temperature powder X-ray diffractometry data. The thermal expansions of the cubic cesium leucite-based compounds were found to vary with the chemical composition. For instance, the thermal expansions of Cs_0.7Na_0.2Al_0.9Si_2.1O₆ and Cs_0.7Li_0.2Al_0.9Si_2.1O₆ were 0.14% at 1273 K and 0.081% at 1073 K, values lower than those of Cs_0.9Al_0.9Si_2.1O₆, which were 0.16% at 1073 K and 0.2% at 1273 K. The results showed that the thermal expansions of the cubic cesium leucite-based compounds changed with ionic substitution at the Cs⁺ sites because of ionic size differences between Cs⁺ and the Na⁺ or Li⁺ substitutional ions.     

Preparation of fine polymer particles containing metallocene derivatives

This article deals with preparations of fine particles of metallocene copolymers by emulsifierfree emulsion polymerization of vinylferrocene (VFc), ferrocenylmethyl methacrylate (FMMA), 1-ferrocenylethyl methacrylate (1-FEMA), 2-ferrocenylethyl methacrylate (2-FEMA), and 1-ruthenocenylethyl methacrylate (1-REMA) with acrylonitrile (AN), styrene (St), and methyl methacrylate (MMA) in water/ethanol medium. As a result, spherical copolymer particles containing metallocene derivatives have been successfully synthesized in the particle size of ca. 120 to 600 nm. The contents of ferrocenyl or ruthenocenyl groups in copolymer particles increased with increasing concentration of charged metallocene derivatives, while the amounts of metallocene derivatives incorporated into particles are much lower than the charged ratio. © 1994 John Wiley & Sons, Inc.