Cr-Mo solid solutions forced by high-energy ball milling

Mixtures of Cr and Mo elemental powders, with the nominal compositions Cr₂₅Mo₇₅, Cr₅₀Mo₅₀, and Cr₇₅Mo₂₅, are processed by high-energy ball milling at ambient temperature. Milling is observed to force the mixing of the immiscible bcc elements Cr and Mo into solid solutions. The lattice parameter of these solid solutions, measured by X-ray diffraction (XRD), displays the expected positive deviation from Vegard’s law. These deviations are compared to the ones predicted by Eshelby’s inclusion model for dilute alloys. The conventional Williamson-Hall approach is shown to fail to determine the grain size in as-milled samples, probably due to the high density of dislocations. Annealing at 700 °C for 10 hours under argon leads to a large reduction in structural defect density, without inducing any significant decomposition. The mixing measured in Cr-Mo is discussed in the broader context of the mechanical mixing forced by ball milling in moderately immiscible systems.     

Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis

Theoretical and experimetal methods have been developed to characterize the effect of mechanical loading on the mesoscopic and macroscopic mechanical state of polycrystalline materials. Ferritic and austenitic single-phase materials were first analyzed, then phase interaction was studied in a multiductile phase material (austeno-ferritic duplex steel) and a natural reinforced composite (pearlitic steel). The theoretical method is based on the self-consistent approach in which elastic and plastic characteristics of the phases have been applied through the micromechanical behavior of single-crystal-using slip systems and microscopic hardening. The effects of a crystallographic texture and phase interaction during loading and after unloading were studied. The elastic and plastic anisotropy of the grains having the same crystallographic orientation were assessed by diffraction strain analysis. The simulation was compared with the experiments performed using the X-ray diffraction technique. In the considered duplex and pearlitic steels, it was observed that the ferrite stress state is much lower than the austenite and cementite ones. The results of diffraction strain distribution have showed the pertinence of the models and give valuable information, for example, for the yield stress and the hardening parameters of each phase in a two-phase material.     

Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718

Notches were machined in specimens of INCONEL 718 by a broaching process, where differing broaching runs led to differing extents of subsurface deformation and surface roughness. Fatigue tests were carried out at 600 °C with a trapezoidal loading waveform at 0.25 Hz. The broaching process that led to the more severe subsurface deformation (but lower surface roughness) showed the worst fatigue performance. Analysis of total strain amplitude in the notch root with the aid of an elastoplastic finite-element (FE) model showed that the work hardening related to the subsurface deformation caused by the different broaching can account for the difference in fatigue lives. Differences in initiation and growth behavior were seen for the two broached finishes as well as for broached and subsequently polished samples. These differences are discussed in terms of a change in crack growth initiation and growth mechanisms due to the presence of the work-hardened layer.     

Cyclic oxidation response of multiphase niobium-based alloys

Cyclic oxidation tests were performed on multiphase Nb-based alloys containing silicide, Laves, and Nb solid solution phases. In particular, the oxidation resistance of six alloys with various compositions (Nb, Ti, Hf, Cr, Ge, and Si) and microstructures was characterized by thermal cycling from ambient temperature to a peak temperature that ranges from 900 °C to 1400 °C. Weight change data were obtained and the corresponding spalled oxides were collected and identified by X-ray diffraction. The results indicated that Nb-based alloys formed a mixture of CrNbO₄, Nb₂O₅, and Nb₂O₅ · TiO₂, with possibly small amounts of SiO₂ or GeO₂. The oxidation resistance was improved when CrNbO₄ formed instead of Nb₂O₅ and Nb₂O₅ · TiO₂. These results were used to assess the influence of microstructure and composition on the oxidation resistance of multiphase Nb-based alloys.     

技术攻关提高成材率

介绍了广钢集团高速线材生产线的生产和工艺概况，分析了成材率的影响因素，阐述了技术攻关提高成材率所采取的措施和取得的良好效果及经济效益。     

Interfacial hybridization kinetics of oligonucleotides immobilized onto fused silica surfaces

Fused silica optical fibers have been used in an intrinsic mode optical configuration as biosensors for fluorescence based detection of hybridization of nucleic acids. In this work, the kinetics of hybridization of single-stranded oligonucleotides that were covalently immobilized were studied. The probe DNA was dT₂₀, and the target was Fluorescein-labeled non-complementary (dT₂₀) or complementary (dA₂₀) oligonucleotide. Chronofluorimetric monitoring of the adsorption and hybridization processes was used to investigate oligonucleotide films of different density, in different salt concentrations, at temperatures of 25 and 40 °C, with the concentration of the target DNA being 0.005–0.1 μM. Mathematical models based on first- and second-order Langmuir adsorption have been examined to describe both the adsorption and the hybridization processes. Experimental data were processed using the models, and the hybridization kinetics were calculated. Hybridization kinetics on these optical fiber DNA sensors was found to be up to three orders faster than results presented for a number of other experiments using different immobilization chemistries.     

赴日无线电监测技术考察报告

首先介绍了日本总务省关东综合通信局电波监理部的情况，然后对日本安立公司生产的RR510A型无线电监测接收机和技术参数以及MS8609A型数字移动无线发射机测试仪的功能进行了分析和介绍。     

Electron Thermalization in Metallic Islands Probed by Coulomb Blockade Thermometry

We describe a systematic series of experiments on thermalization of electrons in lithographic metallic thin films at millikelvin temperatures using Coulomb blockade thermometry (CBT). Joule dissipation due to biasing of the CBT sensor tends to drive the electron system into non-equilibrium. Under all experimental conditions tested, the electron-electron relaxation is fast enough to ensure thermal electron distribution, which is also in agreement with the theoretical arguments we present. On the other hand, poor electron-phonon relaxation plays a dominant role in lifting the electron temperature above that of the bath. From a comparison of the results with the theoretical current-voltage characteristics of the thermometers we precisely determine the electron-phonon coupling constant for the common metals used. Our experiments show that it is a formidable task to attain thermal equilibrium with the bath using single-electron devices under non-zero bias conditions at 20–50 mK temperatures that are typically encountered in experiments. The conclusion concerning Coulomb blockade thermometry is more optimistic and two-fold: (1) One can now correct the errors due to bias heating in a satisfactory manner based on known material properties and the size of the metal films in the sensor. (2) Reliable thermometry down to 20 mK requires islands whose volumes are >10^?15 m³, which is still acceptable both from the parameter (capacitance) and fabrication points of view.     

Low Temperature Acoustic Properties of Poly-Crystalline Aluminium

As in other structurally disordered solids, the low temperature acoustic properties of poly-crystalline aluminium are governed by atomic two-level tunneling systems. The particular temperature variation of sound velocity and internal friction depends on the dynamical behaviour of these tunneling systems, which is expected to be determined by interaction with thermal phonons and conduction electrons as in metallic glasses. In earlier measurements on aluminium-wires no significant difference was found whether the sample was superconducting or kept in the normal state by a sufficiently high magnetic field and the concluding claim was ‘absence of electron-assisted relaxation for tunneling systems in poly-crystalline metals’. In this report, vibrating reed measurements are presented of pure poly-crystalline Al with a special sample shape that reduces the influence of the clamping. We in fact find significant differences between the sample being normal conducting or superconducting. The overall behaviour indeed resembles very closely that of metallic glasses and clearly demonstrates that also in Al tunneling systems couple to conduction electrons as expected. As a quantitative result we may state that the density of states of tunneling systems in poly-crystalline Al is considerably smaller than in metallic glasses. PACS numbers: 61.43.-j, 62.65.+k, 63.50.+x