TiNi shape memory alloys prepared by normal sintering

This paper covers the use of conventional press and sinter of titanium and nickel equiatomic blends, involving transient liquid phases. A notable development has been the fabrication of homogeneous compacts from the elemental powders. Results indicate that employment of a double-stage sintering cycle is effective to sustain the geometrical integrity of the sintered sample. The TiNi alloy prepared in this manner exhibits a recovery strain of 4.6% by generating a restoring stress of 230 MPa, with a martensitic transformation point M_s of 34 °C.     

IEA joint trials: New lessons from old plantations

Two international trials of potential biomass species families and clones planted in 1985 have been analyzed to determine changing patterns in growth, diseases, and insects. In the Swedish trial, with close spacing and short rotations, Salix viminalis clones gave the best average yield of 17.4 Mg/Ha/yr on the first coppice rotation. In the Minnesota, USA trial, with wider spacings and a longer rotation Populus alba hybrid clones gave the best average yields of 5.5 Mg/Ha/yr. The most important disease and insect problems encountered were Septoria musiva stem cankers on some Populus clones; frost die back in some Salix clones; and the leaf blotch miner, Fenusa dohrnii, on most Alnus families. Recommendations for future international cooperation in field trials are presented.     

Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.     

Damage tolerance of glass mat/epoxy laminates hybridized with flexible resin under static and impact loading

This study deals with the impact property and damage tolerance of matrix hybrid composite laminates with different laminate constitution. The matrix hybrid composite laminates consisted of the laminae with a conventional epoxy resin and the laminae with a flexible epoxy resin modified from the conventional resin to avoid the interlaminar delamination. The impact energy absorption ratio greatly depended on the matrix resin placed at the impact face. The energy absorption was almost constant if the conventional resin was placed at the impact surface layer, while it increased exponentially with the increasing fraction of the flexible resin if the flexible resin was placed at the impact face. The impact energy was absorbed by the damage development and propagation in the laminate with conventional resin laminae as the impacted face, while it was absorbed by both the recoverable deformation of the flexible resin and the damage propagation in the laminate with flexible resin laminae as the impacted face.     

U(Ⅳ)-U(Ⅵ)同位素交换反应动力学研究 Ⅰ.Fe~(2+)对U(Ⅳ)-U(Ⅵ)同位素交换反应的催化作用

一、前言由于U(IV)-U(VI)同位素交换体系具有相当大的同位素效应和很好的稳定性,并且容易实现两相回流,这对于分离U同位素的工业应用都是十分有利的。但是,U(IV)-U(VI)同位素交换反应速度非常慢,常温下H~+浓度为1.0—4.0 mol/l时,速度常数为1.0×10~(-4)l~2/mol·s。因此要用U(IV)-U(VI)交换体系浓缩铀同位素,必须研究U(IV)-U(VI)交换反应动力学,找到加快交换反应的方法。     

溶剂萃取分离锂同位素研究Ⅱ.苏丹Ⅰ-中性配位体协萃体系萃取分离锂同位素效应探讨

文章讨论了苏丹I-中性配位体协萃体系萃取分离锂同位素中螯合剂和协萃剂的结构效应。为了获得高的同位素分离效应,螯合剂必须是弱酸性的(PK_α>11),具有强的分子内氢键及易于形成六元螯合环。协萃剂结构不仅要求无空间位阻,而且具有强的配位基。α随配位基的碱性增大而相应提高。萃取络合物中螯合环的增多亦有利于体系α的提高。此外本文还讨论了一些萃取体系的同位素富集方向和萃锂体系用于分离同位素的前景。     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

储层石蜡沉积预测技术研究与应用

在油田开发过程中 ,由于油藏温度、压力等条件的变化 ,高含蜡原油在近井带容易产生石蜡沉积 ,堵塞地层孔隙或裂缝 ,严重影响油田开采 ,尤其对于低渗油田 ,伤害特别严重。文中应用理想溶液理论、质量守恒和能量守恒等基本原理 ,建立更符合油田实际情况的油藏中石蜡沉积预测数学模型 ,开发一套方便实用的油藏中石蜡沉积预测软件系统FPOS1 0。在此基础上 ,应用室内实验数据和现场数据对吉林新民油田油井石蜡沉积情况进行预测和现场拟合 ,确定新民油田临界石蜡沉积半径为 2 5m ,快速、准确地为现场清防蜡措施提供理论依据。     

石油系油浆与煤系闪蒸油的焦化性能——I．热解条件的影响

通过偏光显微镜观察了石油系油浆（LH）与煤系闪蒸油（SN）焦化后所得焦块的光学结构。结果表明，在较宽条件下两种原料单独焦化均得不到取向度高的流线型结构。将两种原料以一定比例混合后先热解丙焦化所得焦块的光学结构明显好于二者混合后直接焦化所得焦块的光学结构，其中LH和SN以3：2的重量比混合后在440℃、1MPa下热解3．5h然后再在530℃、1MPa下焦化8h所得焦块为具有较高取向度的流线型结构，适合于作为针状焦的起始原料。