二维介质PBG结构的工程设计

针对介质材料中按二维菱形周期排列空气圆孔的PBG结构，采用平面波展开法结合迭代技术的理论分析程序，对结构尺寸与介质参数的不同组合进行了批量计算，根据对计算结果的分析，归纳出阻带范围与结构参数之间的函数关系，经数据拟合得出一组准确而快捷的工程设计公式，还给出了根据预期的阻带范围设计PBG结构参数的简明步骤，实例验证了该组公式的实用性。     

紧凑型FLC光纤PDL模块

描述了紧凑型FLC（铁电液晶）光纤PDL（光子延迟线）模块的结构和运转特性；分析了插入损失；提出多信道运转时依赖于波长的设计方案。     

Shear ductility and toughenability study of highly cross-linked epoxy/polyethersulphone

The objective of the present study was to determine whether the ductility and toughenability of a highly cross-linked epoxy resin, which has a high glass transition temperature, T _g, can be enhanced by the incorporation of a ductile thermoplastic resin. Diglycidyl ether of bisphenol-A (DGEBA) cured by diamino diphenyl sulphone (DDS) was used as the base resin. Polyethersulphone (PES) was used as the thermoplastic modifier. Fracture toughness and shear ductility tests were performed to characterize the materials. The fracture toughness of the DDS-cured epoxy was not enhanced by simply adding PES. However, in the presence of rubber particles as a third component, the toughness of the PES–rubber-modified epoxy was found to improve with increasing PES content. The toughening mechanisms were determined to be rubber cavitation, followed by plastic deformation of the matrix resin. It was also determined, through uniaxial compression tests, that the shear ductility of the DDS-cured epoxy was enhanced by the incorporation of PES. These results imply that the intrinsic ductility, which had been enhanced by the PES addition, was only activated under the stress state change due to the cavitation of the rubber particles. The availability of increasing matrix ductility seems to be responsible for the increase in toughness. This revised version was published online in November 2006 with corrections to the Cover Date.     

广义准正则格形码距离谱的计算

本文讨论了格形码距离谱的计算问题，定义了度量空间意义下的广义准正则格形码，对具有Ｉｍａｉ与Ｈｉｒａｋａｗａ［２］和Ｕｎｇｅｒｂｏｅｃｋ［３］定义的典型的时不变网格结构的广义准正则格形码，证明了其距离谱可用全零信息序列对应的码字进行计算。在理论上推广了Ｍ．Ｒｏｕａｎｃｅ与Ｄ．Ｊ．Ｃｏｓｔｅｌｏ的结果，解决了非平方欧几里德度量意义下一类ＴＣＭ信号序列的距离谱计算问题     

TRT入口方管道爆裂原因剖析

介绍了鞍钢7#高炉TRT装置入口方管道爆裂事故经过,进行了原因分析,并提出了解决措施。     

ATM网络中漏桶流量控制特性的研究

本文对ＡＴＭ（异步转移模式）网络中话音、数据和图像业务的漏桶流量控制特性进行了研究。计算机模拟结果表明，由于各种业务内在的相关性不同，相应的漏桶流量控制特性有较大的差异。漏桶参数的选择对于各种业务具有不同的公平性，因而应根据业务的特性来设计漏桶参数。     

超速状态的"混乱"呈现--2005首届深圳城市\建筑双年展评述

文章从“展览描述”、“展览性格分析”、“展览学术分析”三个层面对张永和作为独立策展人的首届深圳“城市＼建筑”双年展进行解读与剖析。     

大空域机动巡航导弹的模糊PID控制器设计

针对大空域机动巡航导弹下降转平飞过程中出现的强非线性特点．在俯仰通道设计了模糊PID双模控制方案。以高度误差和该误差变化量为输入．以高度误差为阀限．在高度误差较大时采用响应迅速的模糊控制器．较小时采用稳态精度较高的PID控制器。最后通过仿真表明通过该方案所控制的弹道符合方案弹道．满足设计指标要求。     

非晶金刚石离子镀膜机自动化控制系统的设计

结合非晶金刚石离子镀膜机的工艺特点和要求,介绍了一种成功应用的分布式控制系统的设计,重点讨论了控制系统的硬件配置、软件设计、通信服务程序以及软件编程中的几个控制算法.     

盘山闸扩建工程水工模型试验研究

辽河干流堤防安全泄量为5000m3/s,盘锦城市防洪工程竣工后,其安全泄量为6800m3/s。而盘山闸的设计泄流能力仅为3000m3/s。通过本模型试验研究进一步确定扩建工程方案的合理性。