膨润土凝胶调剖剂XJF的研制及应用

介绍了调剖剂XJF的配方,讨论了影响调剖剂性能的配方因素(膨润土含量、HPAM溶液浓度、XJ用量及添加剂Fc的浓度),考察了封堵能力和应用范围,简介了在火烧山油田现场试验的结果。     

双相位编码在数据通信中的应用

双相位码是数据串行通信和记录中使用的一种编码方法。在集散控制系统中使用的磁带机和飞行数据记录器中得到广泛应用。本文主要介绍双相位码的编码、译码原理及双相位码的特点;重点论述双相位码的编码和译码过程在微机上的实现。工程实践和实验表明,用微机实现双相位码的编码和译码过程是切实可行的。试用在TDC-2000集散控制系统中获得了圆满成功。     

桐油改性酚醛树脂的结构及固化过程的研究

通过桐油与苯酚在酸性催化剂存在下反应，然后再在碱性催化剂存在与甲醛反应制得了一种热固性桐油改性酚醛树脂。利用红外光谱，差示扫描量热法分析技术对改性树脂的结构及固化反应过程进行了研究。     

FEATURE SOLID MODELING TOOL SYSTEM:FSMTS

In conformity with the principle of Design for Manufacture,feature-based design strate-(?)es have been developed.As the“feature”is relevant to the“macro process plan”and“macro NCprograms”,obviously,“feature”is beyond the power of conventional solid modellers.Neverthe-less,substantial breakthrough has not been made in the solid modeling field,except“feature at-taching”or“feature recognizing”methods have been taken on.In this paper,the theory,concepts,system architecture,and algorithm principles of solid modeling tool system have beenrepresented.The practice of Feature Solid Modeling Tool System (FSMTS) developed atHuazhong University has proved that the tool may be a new foundation of Feature-Based Design.     

Embedded deterministic test for low-cost manufacturing

You have probably heard that BIST takes too long and its fault coverage is low, and that deterministic test requires too many patterns. This article shows how on-chip compression and decompression techniques provide high fault coverage with low test times.     

Continuous Separation of Inclusions from Aluminum Melt Flowing in a Circular Pipe using a High Frequency Magnetic Field

The continuous separation of inclusions from aluminum melt flowing in a circular pipe using a high frequency magneticfield was investigated both theoretically and experimentally The separation efficiency was calculated based on thetrajectory method and compared with experimental results. It is found that the separation efficiency is a functilnondimensional parameters t_i·d_p~2B_e~2/μ_fμ_eα~2 and α/δ.The effective way to improve the separation efficiency is to increasethe effective magnetic flux density and decrease the pipe radius. and the value of α/δ should be kept about 2 in orderto obtain the optimum separation efficiency.     

浅谈多层建筑的斜屋面结构设计

多层建筑的斜屋面结构，应建立合理的结构模型，选用合理的结构方案，在采用结构软件设计时，一定要正确采用倾斜构件沿水平或垂直方向的荷载。     

火电机组运行优化系统的现状与展望

简单回顾了国内外在火电机组运行优化领域的研究历程，列举了目前国内外市场上针对火电机组的各种主流运行优化产品的功能特点和应用情况，分析了国外引进产品和国内自主研发产品在中国当前市场环境下各自的优势和劣势。介绍了当前运行优化系统在国内电站机组的应用现状，阐述了国内外运行优化系统在实际应用中存在的问题，并提出了相应的改进意见。对机组运行优化系统的未来发展进行了展望，指出机组运行优化系统将利用先进技术设备和信息平台，与电站管理紧密结合，在日益规范的市场中不断发展完善，为提高电站经济性发挥更大的作用。     

Shrinkage and splitting of microcracks under pressure simulated by the finite-element method

The two-dimensional finite-element method is applied to analyze the shrinkage and splitting of microcracks regularly arranged on or perpendicular to a grain boundary under pressure. Grain-boundary and surface diffusions are coupled by the boundary conditions at the triple point of the microcrack surface and the grain boundary. The shrinkage and splitting processes for the two kinds of microcracks are revealed by detailed finite-element analyses. For the microcrack lying on a grain boundary, it first shrinks to a small void shape, then the void is split by the grain boundary and the two split voids assume a cylindrical shape under the capillary force of the surface. For the microcrack perpendicular to the grain boundary, it is split into two segments by the grain boundary during the early stage of shrinkage. Then, the split microcracks stop shrinking and evolve into two cylindrical channels with a circular section by the capillary force of the surface. These evolution processes are controlled by the applied pressure, microcrack spacing, ratio of grain-boundary diffusion to surface diffusion, and equilibrium dihedral angle, defined by surface and grain-boundary tensions. The influences of these controlled parameters on the evolution processes are numerically clarified based on a great number of finite-element analyses.     

西门子工业控制网络在棒材连轧生产线的应用

本文通过对包钢棒材连轧线的工业控制网络的由分体到整体的介绍,将西门子公司的三级控制网络(Profibus-DP网络、MPI网络、工业以太网)思想做了一个全面的说明.通过与现场实际相结合,使人们对这一概念有了更加清晰的认识.文章最后还结合作者的一些体会作了总结.