Transmission characteristics of optical waveguides with multiquantum-well structures

The fundamental modes in an optical waveguide with multiquantum-well structure are analysed by the matrix method. It is found that the separation between the propagation constants of the TE and TM waves is relatively large and that the equivalent planar slab guide approximation is available only for TE waves.     

The effects of infusion of trieicosapentaenoyl-glycerol emulsion on extravascular lung water during myocardial ischemia and reperfusion in dogs

To test the effects of eicosapentaenoic acid (EPA) infusion on pulmonary edema induced by coronary ligation and reperfusion, extravascular lung water (EVLW) was measured in situ by the thermal-dye double indicator dilution method in dogs. In the control group of five dogs, 30 mL of a 10% soybean oil emulsion was infused through a leg vein. One hour after infusion, the left anterior descending coronary artery below the first diagonal branch was ligated for 15 min and then reperfused for 30 min. In the EPA group, six dogs were similarly treated with an emulsion of a 10% trieicosapentaenoyl-glycerol (90% pure). EVLW, pulmonary capillary wedge pressure, mean pulmonary artery pressure, mean blood pressure, and cardiac index were measured before and 15 min after coronary ligation, and 15 min and 30 min after coronary reperfusion. There were no significant differences in the hemodynamic indices between the two groups. EVLW significantly increased up to two times of baseline during coronary ligation in the control group (P< 0.05) and more during reperfusion (P<0.01), whereas EVLW did not increase in the EPA group. In conclusion, EPA inhibited EVLW accumulation and may be useful for ameliorating one of the ischemia-reperfusion-induced complications, pulmonary edema.     

Enhancement of Student Learning in Experimental Design Using a Virtual Laboratory

This paper describes the instructional design, implementation, and assessment of a virtual laboratory based on a numerical simulation of a chemical vapor deposition (CVD) process, the virtual CVD laboratory. The virtual CVD laboratory provides a capstone experience in which students synthesize engineering science and statistics principles and have the opportunity to apply experimental design in the context similar to that of a practicing engineer in industry with a wider design space than is typically seen in the undergraduate laboratory. The simulation of the reactor is based on fundamental principles of mass transfer and chemical reaction, obscured by added ldquonoise.rdquo The software application contains a 3-D student client that simulates a cleanroom environment, an instructor Web interface with integrated assessment tools, and a database server. As opposed to being constructed as a direct one-to-one replacement, this virtual laboratory is intended to complement the physical laboratories in the curriculum so that certain specific elements of student learning can be enhanced. Implementation in four classes is described. Assessment demonstrates students are using an iterative experimental design process reflective of practicing engineers and correlates success in this project to higher order thinking skills. Student surveys indicate that students perceived the virtual CVD laboratory as the most effective learning medium used, even above physical laboratories.     

New bleeding model of additives in a polypropylene film under atmospheric pressure II

Many additives are commercially used to add more favorable qualities to films. The bleeding process by which the additive in a film comes to the surface is considered. A new bleeding model of additives in a polypropylene film under atmospheric pressure was investigated. Solubility and diffusion are found to be important for explaining this bleeding process. It was found that the experimental results were explained more precisely by assuming a two‐step transport process between the crystalline regions and the amorphous ones. The solubilities and diffusion coefficients of UV‐stabilizers such as 2‐(2H‐benzotriazol‐2‐yl)‐4‐(1,1,3,3‐tetramethylbutyl)phenol and 2‐(2H‐benzotriazol‐2‐yl)‐4‐methylphenol were determined at 40°C. The difference between the saturation solubilities and the diffusion coefficients of UV‐stabilizers was discussed by comparing with the results of molecular dynamics (MD) simulation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

High Field ESR System and Its Application to the Study of Quantum Spin Systems

Developments of the high field ESR system in Kobe University is presented. Using Gunn oscillators and backward traveling oscillators (BWO), we can cover the frequency region from 30 to 1183.6 GHz with the use of InSb detector. Pulsed magnetic field up to 30 T is available and we are now trying to extend the field up to 40 T. Temperature range is from 1.8 to 300 K. Using this system, we studied S=1/2 ladder like system Cu₂(C₅H₁₂N₂)₂Cl₄, and found a new magnetic transition at 10.1 T at 1.8 K. The temperature dependence of ESR in Cu₂(C₅H₁₂N₂)₂CI₄ shows g-shift below 8 K which corresponds to the maximum of the magnetic susceptibility. The g-shift below 8 K suggests the increase of the quantum fluctuation in the system, and the role of the quantum fluctuation in Cu₂(C₅H₁₂N₂)₂CI₄ is discussed.     

Rapid sensing of trace ionic substances with the novel porous monolith type ion exchanger

Biological and chemical sensor with a rapid response in microlevel test is required for health and environmental monitor. A novel sensing due to porous ion exchanger with three-dimensional acceptor has been first attempted to develop a high-performance sensor. This porous monolith type ion exchanger has an open-cellular monolith structure with 5–50-μm diameter pores. The trace amount of inorganic ions dissolved in aqueous solutions can be quantitatively determined with the impedance given by the monolith, which attracts and adsorbs the ions rapidly. We have succeeded in detecting ions with a concentration as low as 10⁻⁷ mol. The porous ion exchanger has a potentiality as a high-performance device for biological and chemical sensing. POLYM. ENG. SCI., 47:1666–1670, 2007. © 2007 Society of Plastics Engineers     

Heterogeneity of DNA ploidy pattern in carcinoma of the gallbladder: primary and metastatic sites

There are few detailed reports on the heterogeneity of the nuclear DNA ploidy pattern in carcinoma of the gallbladder. We studied twelve autopsied cases who died of extended gallbladder carcinoma. Multiple samples were taken from the primary site (Pri), from direct invasion of the liver (Hinf), from hematogenous metastasis to the liver (H), from lymphatic metastasis (LN) and from peritoneal dissemination (P). The DNA ploidy pattern was investigated by image cytometry. Heterogeneity of the DNA ploidy pattern in Pri, Hinf, H, LN and P was found in 7/11, 2/10, 5/10, 2/6 and 3/6 cases, respectively. Aneuploidy was more frequently found in Hinf than at the Pri. The DNA index of Hinf was significantly higher than that of Pri. Several stemlines, with different quantities of DNA, were found in Pri. Most of these stemlines were also observed in other sites. These facts may suggest that polyclonal cancer cells rather than one cancer cell or monoclonal cancer cells of a Pri metastasize or infiltrate, and that various polyclonal cancer cells proliferate to different degrees under different circumstances.     

Middle ear overpressure treatment of endolymphatic hydrops in guinea pigs

Changes in sleep state and night-time body temperature were studied in 13 healthy young men. Temperature data showed serial dependence that was removed when considering three main segments of the thermogram: an initial rapid drop between 60 and 140 min after lights off, followed by a slower decrease to the thermal minimum and a final temperature increase until waking. The first segment was fitted by a two-term function, while the other two segments were fitted by linear regression. Temperature data obtained after fitting these models were stationary and used to calculate the fast Fourier transformation and the cross-correlation functions between the hypnogram and the thermogram of each subject. Attaining stationarity has unmasked short oscillations during sleep and some temperature series showed the presence of ultradian oscillations with a period of 90-100 min. Significant cross-correlations between sleep stages and body temperature were found, and the parameters of the two-term function fitted to the first temperature drop were related to the sign of the correlation and to that time series (sleep or temperature) which preceded the other during the night.     

Decomposition and regeneration of methane in the absence and the presence of a hydrogen-absorbing alloy CaNi5

Suitable catalysts for the decomposition of methane into carbon and hydrogen and for the regeneration of methane by hydrogenation of the carbon have been looked for in a series of transition metals and precious metals supported on various carriers. The most active catalyst for both reactions was Ni/SiO₂. The carbon formed on this catalyst was thermodynamically less stable than graphite. The different rate equations for the decomposition of methane obtained for the fresh and carbon deposited Ni/SiO₂ suggest that the rate-determining steps are different for the two catalysts. The highest number of carbon atoms deposited per one Ni atom was 31 at 773 K. However, the number of methane molecules recovered easily at 773 K was limited to 1.5 per Ni atom.

A physical mixture of Ni/SiO₂ and CaNi₅, a hydrogen-absorbing alloy, enhanced the decomposition rate of methane, enabling the complete conversion of methane at 773 K beyond the thermodynamic limitation. The presence of CaNi₅ at 273 K separated from the catalyst in a reaction system further enhanced the decomposition of methane due to an increased hydrogen-absorbing capacity of the CaNi₅ at low temperatures. The carbon deposited on Ni/SiO₂ in this case was reactive to be hydrogenated back to methane at 773 K, giving an average 7.5 CH₄ molecules per one Ni atom.