Transition in fouling mechanism in microfiltration of a surface water

The main disadvantage of membrane filtration is membrane fouling, which remains as the major obstacle for more efficient use of this technology. Information about the constituents that cause fouling is indispensable for more efficient operation. We examined the changes in both foulant characteristics and membrane morphology by performing the pilot-scale filtration test using one microfiltration membrane. During the operation, we cut the membrane fibers three times, and the components that caused irreversible fouling were extracted by acid or alkaline solution. We found that the characteristic of inorganic matter extracted by acid solution completely differed depending on the filtration period. A large amount of iron was extracted in the second chemical cleaning, while manganese was the dominant component of the extracted inorganic matter in the third chemical cleaning. The analysis of Fourier transform infrared (FTIR) and cross polarization magic angle spinning carbon-13 (CPMAS (13)C) nuclear magnetic resonance (NMR) demonstrated that the contribution of humic substances and carbohydrate in the organic foulant had increased as fouling developed. The changes in the major foulant have no relation with the fluctuation in feed water. The analysis of membrane morphology illustrated that the cake layer started to build up after the blockage of membrane pores. Based on the above results, we hypothesized the following fouling mechanism: the pores were covered or narrowed with relatively large particles such as iron, carbohydrate or protein; small particles such as manganese or humic substances blocked the narrowed pores; and finally an irreversible cake layer started to build up on the membrane surface.     

Effects of supplemental energy on metabolic and immune measurements in periparturient dairy cows with Johne's disease

The present study was designed to evaluate whether feeding supplemental energy would improve the metabolic profile and alleviate some of the immunosuppression typically noted during the periparturient period in dairy cows with Johne's disease. Twelve dairy cows naturally infected with Mycobacterium paratuberculosis were fitted with rumen cannulas in late gestation and assigned to treatment groups: control, n = 6; or stuffed, n = 6. Cows in the control group were allowed to consume feed ad libitum. Cows assigned to the stuffed treatment group were also fed ad libitum but received additional total mixed rations by manually stuffing their rumens with refused feed to maintain dry matter intake of 2% body weight per day before calving and 2.5% body weight per day after calving. Serum nonesterified fatty acid levels were significantly decreased in stuffed cows compared with control cows, indicating that stuffing to maintain dry matter intake improved the energy balance in the cows. In addition, periparturient serum calcium and magnesium concentrations were significantly higher in stuffed cows. Stuffing modulated cell-mediated immunity by reducing lymphocyte proliferative responses to T-cell mitogens during early lactation. Stuffing resulted in an increase in the secretion of in vitro immunoglobulin by peripheral blood mononuclear cells after parturition when compared to control cows. These data demonstrate that energy balance is improved by providing additional energy in this manner and suggest energy supplementation can improve some aspects of immune function during the periparturient period.     

Identification of putative gene encoded on ORF16 of the 81 kb contig of Arabidopsis thaliana chromosome III as alpha-mannosidase

We isolated cDNA corresponding to open reading frame (ORF) 16 of the 81 kb contig of Arabidopsis thaliana chromosome III [Quigley., Nucleic Acids Res., 24, 4313-4318 (1996)] and expressed alpha-mannosidase activity in tobacco suspension-cultured cells, which revealed that ORF16 encodes alpha-mannosidase. We also suggested that Arabidopsis harbors three genes encoding alpha-mannosidase by homology search against the database.     

Effects of mechanical force on crystalline structure of electrospun poly(1‐butene) membranes

Fibrous poly(1‐butene) membranes were prepared from solutions using mixed solvents via electrospinning. The electrospun fibrous poly(1‐butene) membranes were stretched at elongations of 8, 16 and 24%, respectively. Scanning electron microscopy and stress–strain analysis showed that the deformation was elastic at an elongation of 8%, while plastic deformation occurred above 16%. The crystalline transformation induced by mechanical stretching was investigated using wide‐angle X‐ray diffraction. The poly(1‐butene) membrane stretched at 24% exhibited decreased diffraction intensity at 2θ = 11.8° and 18.3°, corresponding to the (200) and (213) crystalline reflections, indicating that crystalline transformation from metastable form II to either stable form I or I′ occurred due to mechanical stretching. Copyright © 2011 Society of Chemical Industry     

Thermal cis–trans conversion in thiophene oligomers

Thermal cis–trans conversion has been examined in oligothiophene single molecules encapsulated in the molecular vessels of cyclodextrin and Na-mordenite. At high temperatures, optical absorption intensities are enhanced in bithiophene, terthiophene and quinquethiophene, while the intensity of quarterthiophene is temperature independent. Optical absorption comes from uncompensated transition dipole moment due to the thermal torsion between cis and trans forms.     

Vacancy site occupation by Co and Ir in half-Heusler ZrNiSn and conversion of the thermoelectric properties from n-type to p-type

The n-type thermoelectric properties of the half-Heusler compound ZrNiSn can be converted to p-type by the addition of Co and Ir. We found that Co and Ir atoms preferably occupy the vacancy sites instead of substituting at Ni sites. This implies that the phase stability of the compound gradually changes towards that of the Heusler compound Zr(Ni,M)₂Sn, where M is Co and/or Ir. The occupation of vacancy sites by Co and Ir atoms leads to a drastic reduction in lattice thermal conductivity owing to the enhancement of phonon scattering by the solid solution effect.     

Dependence of off-leakage current on channel film quality in poly-Si thin-film transistors and analysis using device simulation

The dependence of off-leakage current on channel film quality in poly-Si thin-film transistors has been analyzed using two-dimensional device simulation. It is found that the off-leakage current decreases as the intragrain trap density decreases for the low V_gs. This is because the Phonon-assisted tunneling with Poole-Frenkel effect is the dominant mechanism of the carrier generation and the generation rate of carrier pair decreases as the intragrain trap density decreases. On the other hand, the off-leakage current slightly increases as the intragrain trap density decreases for the high V_gs. This is because the band-to-band tunneling is the dominant mechanism and the influence of the intragrain trap density to the carrier conductance is larger than that to the generation rate.     

The influence of dopant species on thermal stability of NiSi film

We investigated the relationship between thermal stability of NiSi films and the implanted dopant species on Si substrates. The most stable NiSi layer appeared on Boron-implanted Si substrate, where the formation of pseudo-epitaxial transrotational structure was observed, just in case that the dose of boron is more than 5e15 atoms/cm². This unique crystallographic orientation of NiSi film on Boron-implanted substrate is a key role of thermal stability because thermal stress at grain boundary can be diminished by peculiar arrangement of transrotational domains, owing to the anisotropy in coefficient of thermal expansion (CTE) of NiSi.     

Effects of radioactive fallout on the pregnant woman and the fetus

The levels of ⁹⁰Sr and ¹³⁷Cs in human placenta, fetus and diet were determined by radiochemical methods during the period from March 1966 to December 1968. The possible effects of these radionuclides on the pregnant woman and the fetus were discussed. The metabolic characteristics of both ⁹⁰Sr and ¹³⁷Cs were also discussed on the basis of estimates of discrimination factors and observed ratios of these radionuclides.

As a result of the analyses, the dose rate to the human placenta resulting from deposition of ⁹⁰Sr in the organ was estimated at about 0.003 mrem/month and that of ¹³⁷Cs at about 0.013 mrem/month. The dose rate to the total body resulting from the body burden of these radionuclides in the mother was estimated at about 0.012 mrem/ month. These values are much smaller than the monthly dose from ⁴⁰K normally existing in the body.

It was rather difficult to draw definitive conclusions concerning the possible correlation between the ⁹⁰Sr fallout and the annual changes of infant mortality rates in Japan.     

A 2.5-GFLOPS, 6.5 million polygons per second, four-way VLIWgeometry processor with SIMD instructions and a software bypassmechanism

A four-way very long instruction word (VLIW), 312-MHz geometry processor with peripheral component interconnect/accelerated graphic port bus bridge was implemented in a 0.21-μm, 2.5-V, three-layer-metal CMOS process. We adopted (1) a software bypass mechanism, (2) single-instruction multiple-data stream instructions, (3) four sets of floating-point multiply add and accumulate execution units, (4) special condition code registers and a branch condition generator for a clipping operation, and (5) automatic clock delay tuning methodology. As a result of these features, we achieved a performance of 2.5 GFLOPS and 6.5 million polygons per second for a three-dimensional geometry processor, which is the highest published performance as a single geometry processor. The processor is applicable to computer-aided-design systems that require very high graphics performance