Sound isolation by piezoelectric polymer films connected to negative capacitance circuits

Sound isolation has been achieved using a piezoelectric polymer film connected to a negative capacitance feedback circuit. A curved PVDF film was located in the middle of an acoustic tube and the transmission loss of sound through the film was determined in the audio frequency range. At any chosen frequency, the complete isolation of sound was achieved by adjusting the feedback, i.e. the complex capacitance of the circuit was matched precisely to that of the film.     

Influence of surface roughness on friction and scuffing behaviour of cast iron under sparse lubrication

Friction and scuffing behaviour of grey cast iron as influenced by the surface roughness under sparse lubrication conditions is studied. The studies are carried out on a three-shoe-on-disc machine under the conditions of parallel sliding. The experiments were conducted at three oil supply rates of 0.10, 0.22 and 0.36 μg/cm² per contact obtained through a mist oiling system and with specimens of cast iron shoes of different roughness values, Ra, between 0.04 and 2.0 μm against a 0.55% C steel disc. In a step load procedure, the friction torque at the end of each load step and the scuffing load are the major parameters measured. Results of friction and scuffing behaviour as a function of roughness and oil supply rates have been discussed.     

Measurements of gamma-ray emission probabilities of 241, 243Am and 239Np

Gamma-ray emission probabilities of ^{241, 243}Am and ²³⁹Np have been precisely measured with gamma- and alpha-ray spectroscopic methods. The activities of the samples were determined by measuring alpha particles using a Si semiconductor detector. Gamma rays emitted from the samples were measured with a planar type High-Purity Germanium (HPGe) detector. An efficiency curve of the HPGe detector was derived with uncertainties from 0.7% to 2.5% by combining measured efficiencies and Monte Carlo simulation. The gamma-ray emission probabilities for the major gamma rays of these nuclides were determined with uncertainties less than 1.2%.     

Properties of novel diallyl phthalate resin modified with sulfur‐containing allyl ester compounds

Sulfur‐containing allyl ester, which reacts with diallyl phthalate (DAP) resin to have allyl groups, was synthesized by the reaction of allyl phthalic acid with bisphenol having sulfur atoms. The sulfur‐containing allyl ester compound was blended with DAP resin to improve the adhesive properties to copper. By modification with sulfur‐containing allyl ester compound, the T‐peel adhesive strength and the lap shear adhesive strength to copper was improved. In particular, the adhesive strength was greatly improved when the resin was modified with the allyl ester compound having a disulfide bond (?S?S?) (DADS). It is concluded that this result is due to the improvement of the interfacial adhesive strength because the sulfur atom was found to be located in the surface of the copper by Fourier transform infrared (FTIR) analysis. The glass transition temperature (T_g) and the thermal decomposition temperature (T_d) of the cured DAP resin modified with DADS slightly decreased with increasing concentration of DADS. The lowering of T_g is because the crosslinking density of the DAP resin modified with DADS is smaller than that of DAP resin. Moreover, from thermogravimetric analysis, the lowering of Td of the DAP resin modified with DADS is because DADS is likely to pyrolyze. © 2013 Society of Chemical Industry     

Adhesion between polymer surface modified by graft polymerization and tissue during surgery using an ultrasonically activated scalpel device

In the field of surgery, achieving adhesion between a polymer implant and tissue poses a challenge considering that suturing is not appropriate for the stability of such implants. An ultrasonically activated scalpel that generates heat by mechanical vibration and promotes adhesion between a polymer implant and native tissue by pressing the two materials together has very good potential for application in the field. To determine the type of polymer that is suitable for the purpose, we investigated polyethylene (PE) and polystyrene (PS) films, the surfaces of which were activated by corona discharge. Graft polymerization was then performed on the corona‐treated surfaces to vary their properties. The corona‐treated PE and PS films grafted with poly(acrylic acid), poly(methacrylic acid), poly(vinyl benzylacrylic acid), and poly(hydroxylethyl acrylate), respectively, adhered to the tissue when the ultrasonically activated scalpel was applied. The heat generated by the mechanical vibration and the applied pressure enabled the carboxyl or hydroxyl groups to bond with the proteins in the extracellular matrix. We therefore concluded that it was possible to integrate this technique in the development of new types of polymer devices that could be stably implanted in a living body. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40885.     

On a posteriori estimates of inverse operators for linear parabolic initial-boundary value problems

We present numerically verified a posteriori estimates of the norms of inverse operators for linear parabolic differential equations. In case that the corresponding elliptic operator is not coercive, existing methods for a priori estimates of the inverse operators are not accurate and, usually, exponentially increase in time variable. We propose a new technique for obtaining the estimates of the inverse operator by using the finite dimensional approximation and error estimates. It enables us to obtain very sharp bounds compared with a priori estimates. We will give some numerical examples which confirm the actual effectiveness of our method.     

Enhanced catalytic activity of nanoshell carbon co-doped with boron and nitrogen in the oxygen reduction reaction

The use of carbon cathode catalysts in polymer electrolyte fuel cells instead of the current platinum catalysts is attracting increasing attention. We claim that two factors are important for enhancing the activity of carbon cathode catalysts in the oxygen reduction reaction (ORR): the formation of a nanoshell structure and co-doping with boron and nitrogen. Herein, we investigate the preparation and characterization of active ORR carbon catalysts that combine the above factors. Boron and nitrogen (BN)-doped nanoshell-containing carbon (BN-NSCC) was prepared by carbonizing a mixture of poly(furfuryl alcohol), cobalt phthalocyanine, melamine, and a trifluoroborane–methanol complex at 1000 °C. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed the formation of nanoshell structures with distorted graphitic layers and the introduction of boron and nitrogen atoms, respectively. The ORR activity was evaluated in oxygen-saturated 0.5 mol dm^?3 H₂SO₄ using Koutecky–Levich analysis. The BN-NSCC showed an eight to ten times higher ORR activity than undoped NSCC, with an increased number of electrons participating in the reaction. Tafel analysis revealed a change in the rate-determining step caused by BN-doping. Thus, the combination of a nanoshell structure and co-doping with boron and nitrogen was found to improve the ORR activity of carbon catalysts.