Nano-cube MgO formed on silicon substrate using pulsed laser deposition

Nano-cube MgO particles were formed on Si substrates by deposition of an MgO target using pulsed laser deposition method. An epitaxial film grows on Si(001) substrate with its contraction of lattice constants. In this study, expecting high quality MgO film, the MgO film prepared in the oxygen pressure ranging from 75-400 mTorr at the high temperature of -750 degrees C. The deposited MgO showed the growth of (001) preferred orientation on the Si(001) substrate. However, X-ray Photoelectron Spectroscopy (XPS) indicated the MgO film did not form a continuous film on the Si surface. Interestingly, the surface morphology observed by an Atomic Force Microscopy (AFM) showed nano-cube MgO particles scattered on the smooth surface of Si substrate. After annealing the nano-cube MgO, the shape of MgO particles were changed from nano-cube to round shaped particles. The AFM image of the surface showed round shaped MgO nanoparticles scattered on rough surface. X-ray Diffraction (XRD) revealed the epitaxial growth of MgO(001) with cubic on cubic arrangement on the Si(001) substrate (MgO[100] parallel to Si[100]).     

A discussion on major factors affecting crack path of concrete-to-concrete interfacial surfaces

This paper elaborates major factors affecting the crack path of concrete-to-concrete interfacial surfaces produced with placing joint. Eleven types of specimens were employed for the evaluation of tension softening diagram followed by surface observation of the ligament after fracture test. The surface analysis revealed that the layer of Ca(OH)₂ plays a primary role on the crack path. The authors discuss the relationship between fracture mechanics parameters and the ratio of fractured part which excludes detached part in the ligament. The mechanism for determining crack path near concrete-to-concrete interface is proposed using ‘scattered hole model’.     

Temporal changes in vertical distribution of 137Cs in litter and soils in mixed deciduous forests in Fukushima,Japan

Downward migration of ¹³⁷Cs in soils was studied in three mixed deciduous forests c.a. 40 km northwest of the Fukushima Daiichi Nuclear power plant (FDNPP), Japan. We selected three different types of forest regarding to environmental condition such as slope inclinations and snow coverage conditions at the time of deposition. We examined temporal changes in the vertical distribution of ¹³⁷Cs from litter layers to 10 cm soil depth for two years (2.3 to 4.3 years after the FDNPP accident in 2011). At all three study sites, the ¹³⁷Cs in the litter layer had largely migrated to surface soil by 2013. After 2014, about 80% of the ¹³⁷Cs in forest soils (litter layer to 10 cm soil depth) remained within 0–5 cm soil layer. The vertical distribution had not changed substantially since 2014, suggesting that changes to the downward migration rates of ¹³⁷Cs in soils drastically decreased with time. In addition, small amounts of migrating ¹³⁷Cs could not be detected by the present method because there was a large spatial variation in the distribution of soil ¹³⁷Cs. The results showed similar patterns of soil ¹³⁷Cs distribution among the three study sites although there were differences in the environmental conditions.     

Growth and low-energy electron microscopy characterization of monolayer hexagonal boron nitride on epitaxial cobalt

Low-energy electron microscopy (LEEM) has been used to study the structure, initial growth orientation, growth progression, and the number of layers of atomically thin hexagonal boron nitride (h-BN) films. The h-BN films are grown on heteroepitaxial Co using chemical vapor deposition (CVD) at low pressure. Our findings from LEEM studies include the growth of monolayer film having two, oppositely oriented, triangular BN domains commensurate with the Co lattice. The growth of h-BN appears to be self-limiting at a monolayer, with thicker domains only appearing in patches, presumably initiated between domain boundaries. Reflectivity measurements of the thicker h-BN films show oscillations resulting from the resonant electron transmission through quantized electronic states of the h-BN films, with the number of minima scaling up with the number of h-BN layers. First principles density functional theory (DFT) calculations show that the positions of oscillations are related to the electronic band structure of h-BN.      

Structural determination of individual chemical species in a mixed system by iterative transformation factor analysis-based X-ray absorption spectroscopy combined with UV-visible absorption and quantum chemical calculation

A multitechnique approach using extended X-ray absorption fine structure (EXAFS) spectroscopy based on iterative transformation factor analysis (ITFA), UV-visible absorption spectroscopy, and density functional theory (DFT) calculations has been performed in order to investigate the speciation of uranium(VI) nitrate species in acetonitrile and to identify the complex structure of individual species in the system. UV-visible spectral titration suggests that there are four different species in the system, that is, pure solvated species, mono-, di-, and trinitrate species. The pure EXAFS spectra of these individual species are extracted by ITFA from the measured spectral mixtures on the basis of the speciation distribution profile calculated from the UV-visible data. Data analysis of the extracted EXAFS spectra, with the help of DFT calculations, reveals the most probable complex structures of the individual species. The pure solvated species corresponds to a uranyl hydrate complex with an equatorial coordination number (CNeq) of 5, [UO2(H2O)5]2+. Nitrate ions tend to coordinate to the uranyl(VI) ion in a bidentate fashion rather than a unidentate one in acetonitrile for all the nitrate species. The mononitrate species forms the complex of [UO2(H2O)3NO3]+ with a CNeq value of 5, while the di- and trinitrate species have a CNeq value of 6, corresponding to [UO2(H2O)2(NO3)2]0 (D2h) and [UO2(NO3)3]- (D3h), respectively.     

Preparation and properties of biocomposites composed of sorbitol‐based epoxy resin,pyrogallol–vanillin calixarene,and wood flour

The reaction of pyrogallol (PG) and vanillin (VN), both of which are derived from plant resources, in the presence of p‐toluenesulfonic acid gave PG–VN calixarene (PGVNC) mainly composed of guaiacyl pyrogallol[4]arene. After sorbitol polyglycidyl ether (SPE) was mixed with PGVNC in tetrahydrofuran at an optimized epoxy/hydroxy ratio 1/2.65, the obtained SPE/PGVNC solution was mixed with wood flour (WF), prepolymerized at 150°C, and subsequently compressed at 190°C for 3 h to give SPE–PGVNC/WF biocomposites with WF content 0–20 wt%. The tan δ peak temperature of SPE–PGVNC was 148.1°C, which was much higher than that of the SPE cured with petroleum‐based phenol novolac (SPE–PN) at an optimized epoxy/hydroxy ratio 1/1. Although tan δ peak temperature slightly decreased with increasing WF content, the storage moduli of the SPE–PGVNC/WF biocomposites in the rubbery state at more than 150°C were much higher than those of SPE–PGVNC and SPE–PN. Also, the tensile modulus and strength for SPE–PGVNC/WF increased with increasing WF content. Field emission‐scanning electron microscopy analysis of the biocomposites revealed that WF is tightly incorporated into the crosslinked epoxy resins. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Multiple mechanisms in the perception of face gender: Effect of sex-irrelevant features.

Effects of sex-relevant and sex-irrelevant facial features on the evaluation of facial gender were investigated. Participants rated masculinity of 48 male facial photographs and femininity of 48 female facial photographs. Eighty feature points were measured on each of the facial photographs. Using a generalized Procrustes analysis, facial shapes were converted into multidimensional vectors, with the average face as a starting point. Each vector was decomposed into a sex-relevant subvector and a sex-irrelevant subvector which were, respectively, parallel and orthogonal to the main male–female axis. Principal components analysis (PCA) was performed on the sex-irrelevant subvectors. One principal component was negatively correlated with both perceived masculinity and femininity, and another was correlated only with femininity, though both components were orthogonal to the male–female dimension (and thus by definition sex-irrelevant). These results indicate that evaluation of facial gender depends on sex-irrelevant as well as sex-relevant facial features. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Determination of ethychlozate and its degradation product in fruits by HPLC and LC/MS

A method was developed for the analysis of ethychlozate (CIE) and its decomposition compound, 5-chloro-3(1H)-indazolylacetic acid (CIA) in fruits by HPLC and LC/MS. The sample was homogenized with 1 mol/L HC1, and CIE and CIA were extracted with 5 mol/L HCl and acetone. They were extracted from the acetone extract with diethylether-n-hexane (2:1). CIE was hydrolyzed to CIA with methanol-4 mol/L KOH (1:1). The solution was made acidic, and CIA was extracted with diethylether-n-hexane (2:1). The extract was cleaned up on a silica gel column. CIA was determined by HPLC-UV and LC/MS (Scan or SIR). Four fruits were spiked with CIE or CIA at 0.5 microgram/g and analyzed by the proposed method with HPLC. The average recoveries were 77.2-83.2% for CIE and 71.2-89.2% for CIA. The concentrations determined by LC/MS were 10-25% higher than the values by HPLC. The limit of detection (LOD) of CIA standard solution by HPLC corresponds to 0.015 microgram/g of CIE in the sample. In the same way, the LOD of CIA by LC/MS (SIR) corresponds to 0.009 microgram/g of CIE in the sample.     

Towards implementation of floating cast method for growing large‐scale high‐quality multicrystalline silicon ingot using designed double crucibles

We report on our attempt to scale up the floating cast method to grow high‐quality multicrystalline silicon ingot using specially designed double crucibles. The cross section of the grown ingot showed the large crystal grain size originating from initially formed dendrite crystals around the top of the melt. By using double crucibles, the residual melt was spontaneously removed from the inner crucible to the outer one at the final stage of the crystal growth. Performance of small‐scale solar cells revealed no significant changes between the top and the bottom part of the ingot except the edge of the bottom due to the non‐uniform removal of the melt. This suggests that strong contact of the ingot with the crucible was successfully avoided by the double crucibles. Therefore, the floating cast method combined with specially designed double crucibles is concluded to be feasible, which could be implemented to realize high‐quality multicrystalline silicon ingot for practical size wafers. Copyright © 2013 John Wiley & Sons, Ltd.     

Hydrogen uptake of reduced graphene oxide and graphene sheets decorated with Fe nanoclusters

Graphene oxide (GO) has been prepared by employing modified Staudenmaier's method through thermal exfoliation of graphite oxide. High pressure hydrogen sorption isotherms up to 50 bar of GO, reduced by thermal reduction (TR-GO), chemical reduction (CR-GO) and graphene sheets decorated with Fe nanoclusters (Fe-GS) have been investigated. Thermal reduction of GO at 623 K under high vacuum yields TR-GO. Chemical reduction of GO using hydrazine forms CR-GO. Fe-GS was synthesized through arc-discharge between the ends of two graphite rods with one rod carrying Fe nanoparticles. The surface areas of these graphene samples were determined from the nitrogen adsorption isotherm employing Brunauer, Emmett and Teller (BET) method. Kelvin's equation was used to determine the pore size distribution of all graphene based samples. Hydrogen pressure-composition isotherms (PCI) were determined at 300 K and at 77 K, between 0.1 and 50 bar. Further, in this paper, we present a comparative adsorption isotherm analysis of hydrogen and helium on TR-GO. This reveals that the volume of hydrogen and helium adsorbed by TR-GO is nearly equal. The similar uptake volume determined for both hydrogen and helium indicates the possibility of monolayer adsorption of hydrogen and also nearly similar binding energy between TR-GO and H₂/He.