New bleeding model of additives in a polypropylene film under atmospheric pressure II

Many additives are commercially used to add more favorable qualities to films. The bleeding process by which the additive in a film comes to the surface is considered. A new bleeding model of additives in a polypropylene film under atmospheric pressure was investigated. Solubility and diffusion are found to be important for explaining this bleeding process. It was found that the experimental results were explained more precisely by assuming a two‐step transport process between the crystalline regions and the amorphous ones. The solubilities and diffusion coefficients of UV‐stabilizers such as 2‐(2H‐benzotriazol‐2‐yl)‐4‐(1,1,3,3‐tetramethylbutyl)phenol and 2‐(2H‐benzotriazol‐2‐yl)‐4‐methylphenol were determined at 40°C. The difference between the saturation solubilities and the diffusion coefficients of UV‐stabilizers was discussed by comparing with the results of molecular dynamics (MD) simulation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Resonance surface X-ray scattering technique to determine the structure of electrodeposited Pt ultrathin layers on Au(1 1 1) surface

It is demonstrated that resonance surface X-ray scattering (RSXS), in which incident X-ray energy close to the Pt L_III absorption edge (11.55 keV) is used, is very useful for the determination of the structure of electrodeposited Pt thin layers on a Au(1 1 1) surface. This technique was applied to characterize the structure of electrodeposited Pt layers on Au(1 1 1) substrates prepared under two extreme conditions, which are known to provide rough and atomically flat layers. Detailed structural information was obtained by RSXS measurements and it was confirmed that the structures of the Pt layers were as reported. Pt atoms of the atomically flat monolayer were found to be situated at the threefold hollow cubic closest packing (ccp) sites of the Au(1 1 1)-(1 × 1) surface.     

One-Step Oxidation of Benzene to Phenol over Cu/Ti/HZSM-5 Catalysts

The gas-phase catalytic oxidation of benzene over copper supported on HZSM-5 added with titanium (Cu/Ti/HZSM-5) was carried out by using molecular oxygen as an oxidant. Phenol was effectively produced by the titanium addition to Cu/HZSM-5. The titanium addition to Cu/HZSM-5 induces the easy reduction of Cu²⁺ species to Cu⁺ species in the catalysts, and the produced Cu⁺ species seems to produce the phenol effectively.     

Simulation of thermophysical flow in axisymmetric nozzle with expansion chamber

Axisymmetric nozzle flows with a free‐jet expansion are simulated considering several substances and several flow conditions, and the thermophysical properties in the nozzle and the free‐jet region are predicted. The present numerical method is based on the preconditioning method developed by Yamamoto and the mathematical models of thermophysical properties of the substances. As numerical examples show, gas flows of carbon dioxide, water, and nitrogen under a subcritical pressure condition are first calculated. Calculated distances to the Mach disk are compared with the experimental results, and also the density distributions are compared among these three substances. Second, carbon dioxide flows while changing the pressure from subcritical to supercritical values are calculated and the effect of pressure on the flow field is investigated. Third, flows of water vapor with and without nonequilibrium condensation are calculated and the effect of condensation on the flow field is investigated. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Study of shunt type SFCL equipped with electromagnetic repulsion switch for large capacity

Using a high‐temperature superconductor, we constructed and tested a model Superconducting Fault Current Limiter (SFCL). The SFCL that we proposed has a vacuum interrupter with electromagnetic repulsion mechanism. We set out to construct a high‐voltage‐class SFCL. We produced an electromagnetic repulsion switch equipped with a 24‐kV vacuum interrupter (VI). However, the opening speed becomes slower, because the larger vacuum interrupter needs a heavier‐weight contact. For this reason, the current which flows in a superconductor may not be interruptible within a half cycle of current. In order to solve this problem, it is necessary to change the design of the coil connected in parallel and to strengthen the electromagnetic repulsion force at the time of opening the vacuum interrupter. Thus, the design of the coil was changed, and in order to examine whether the problem is solvable, a current limiting test was conducted. We carried out a current limiting test using second‐generation (2G) HTS wire. The element used in this experiment has a stainless steel stabilizer on both sides of the wire. In the experiment we succeeded in interrupting the current of a superconductor within a half cycle. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(4): 20–27, 2010; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21039     

Ultra Low-Dose Radiation: Stress Responses and Impacts Using Rice as a Grass Model

We report molecular changes in leaves of rice plants (Oryza sativa L. - reference crop plant and grass model) exposed to ultra low-dose ionizing radiation, first using contaminated soil from the exclusion zone around Chernobyl reactor site. Results revealed induction of stress-related marker genes (Northern blot) and secondary metabolites (LC-MS/MS) in irradiated leaf segments over appropriate control. Second, employing the same in vitro model system, we replicated results of the first experiment using in-house fabricated sources of ultra low-dose gamma (γ) rays and selected marker genes by RT-PCR. Results suggest the usefulness of the rice model in studying ultra low-dose radiation response/s.