Characterization of localized states in thin PrBa2Cu3O7−x tunnel barriers

Characteristic power-law dependence of junction conductance on temperature was confirmed at low temperatures fora,b-axis oriented Au/PrBa₂Cu₃O_7−x /YBa₂Cu₃O_7−y junctions with a PrBa₂Cu₃O_7−x layer thinner than 30 nm, indicating that current transport via a small number of localized states was predominant. The radius and the density of the localized states were estimated to be 1.1 nm and 5.0x10¹⁹ eV⁻¹ cm⁻³, respectively. Transport measurement at 1.7 K in a magnetic field of up to 6 T revealed no indication of on-site Coulomb repulsion of electrons in the localized states. These results support the possibility of resonant tunneling of Cooper pairs in superconductor-insulator-superconductor junctions with a thin PrBa₂Cu₃O_7−x tunnel barrier.     

Effect of 5-fluorouracil and UFT on experimental liver metastasis model of colorectal cancer using mouse colon 26 cells

Effects of 5-fluorouracil (5-FU) and UFT on an experimental liver metastasis model were compared at equi-effective dosage levels against subcutaneous tumor of mouse colon 26. 5-FU at the dosage level of 40 mg/kg suppressed the subcutaneous tumor growth by 70.0% and 45.0% on day 13 and day 18, respectively, and UFT at 20 mg/kg provided almost equal suppression (63.0% and 48.0%). In the liver metastasis model, 5-FU at 40 mg/kg showed more potent prevention of the formation of metastatic foci (94.9%) than did UFT (60.4%) at 20 mg/kg. 5-FU at 40 mg/kg produced a much higher peak serum level of 5-FU than did UFT at 20 mg/kg and also showed a much higher AUC (area under the curve) level in the portal blood. These results suggest that oral administration of 5-FU might be useful in prevention of liver metastasis of colorectal cancer.     

Erythroid potentiating activity of tissue inhibitor of metalloproteinases on the differentiation of erythropoietin-responsive mouse erythroleukemia cell line, ELM-I-1-3, is closely related to its cell growth potentiating activity

The erythroid-potentiating activity (EPA) of the tissue inhibitor of metalloproteinase-1 (TIMP-1) was re-examined using ELM-I-1-3, a mouse erythroleukemia cell line, which responded well to erythropoietin. Depletion of pre-existing TIMP-1 from fetal calf serum in culture medium using monoclonal antibody suppressed erythropoietin-induced differentiation as measured by the induction of hemoglobin, commitment assay and globin mRNAs. The removal of TIMP-1 also suppressed the proliferation of ELM-I-1-3 as measured by cell number and de novo DNA synthesis. These changes were reversed by the addition of purified TIMP-1 to the culture medium. Anti-TIMP-1 antibody also blocked both hexamethylene bisacetamide (HMBA)-induced erythroid differentiation and the proliferation of both ELM-I-1-3 and Friend erythroleukemia cells. Considering previous reports analyzing the chemical induction of Friend mouse erythroleukemia cell differentiation, our results suggest that erythropoietin- or HMBA-induced erythroid differentiation might also be coupled with cell proliferation. Our 3H thymidine-uptake experiment shows that TIMP-1 removal was also effective in the inhibition of cell growth of various other cell lines in addition to erythroleukemia cell lines. These results suggest that EPA action of TIMP-1 on erythroid leukemia cell lines is closely related to its activity to promote the cell growth of various cell lines and cells including erythroleukemia cell lines.     

Serotype-specific amplification of Rickettsia tsutsugamushi DNA by nested polymerase chain reaction

Polymerase chain reaction (PCR) with nested primer pairs was used to diagnose scrub typhus and identify the Rickettsia tsutsugamushi serotype. The primer pairs used for PCR were designed on the basis of the nucleotide sequence of the gene that encodes the 56-kDa antigen. Serotype-specific primers were used in the second PCR amplification. Five serovariants, the Gilliam, Karp, Kato, Kawasaki, and Kuroki strains of R. tsutsugamushi, were identified by nested PCR. In addition, the serotype identified by PCR with DNA from blood clots was the same as that of the strain isolated from five patients with scrub typhus. These findings indicate that this method is useful for diagnosis and identification of the rickettsial serotype in infected patients.     

Unperturbed dimension of poly(4-acetoxystyrene) measured in good and theta solvents

In order to obtain the additional data concerning the unperturbed dimension of poly-4-substituted styrene, light scattering measurements are performed on the twenty-two fractions with molecular weight of (0.91–352)·10⁴ of poly(4-acetoxystyrene) in dioxan at 25°C, from which the molecular weight obtained was found easily to be evaluated with the gel permeation chromatography using THF. Phase separation experiments for this polymer indicate that the theta state is attained in isopropyl acetate at 19.7°C and butyl acetate at 26.8°C. By making viscosity measurements at that state, the value of K_Θ is directly evaluated as 5.4·10^?4 dl g^?1. The limiting viscosity number is also obtained in good solvents, THF and dioxan, at 25°C and constants of the Mark-Houwink-Sakurada equation in each solvent are determined. Further, approximately the same K_Θ as above is obtained from these data with the Stockmayer-Fixman plot. The calculated value of steric factor, 2.37, on this polymer may be plausible, compared with those of polyvinylaromatic derivatives.     

Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

Thermal stability of reinforced Nb3Sn composite superconductor under cryocooled conditions

Several types of reinforced Nb₃Sn wires have been developed to prevent reduction of superconducting properties by applying a strong electromagnetic force. To fabricate a cryocooled magnet using those reinforced wires, we experimentally measured the minimum quench energy (MQE) under cryocooled conditions of some reinforced Nb₃Sn wires. As a result, it became clear that thermal stability expressed as MQE was controlled by the temperature margin between the temperature of the operating condition and the transition temperature from superconductivity to normal. Using the FEM analysis, it was realized that the cause of the decline in thermal stability for the reinforced wires was the low thermal conductivity of the reinforced materials.     

The architecture of the Sure System 2000 communications processor

Sure System 2000, a fault-tolerant computer that couples multiprocessors to offer low-priced, high-performance systems that deal effectively with faults and failures, is presented. The architecture is based on the local redundancy technique, ensuring that no hardware or software fault can cause a system crash. Software errors can be fixed, and hardware can be replaced, upgraded, or added dynamically. Existing fault-tolerant computers are briefly reviewed, and the logic hardware system configuration of the Sure System 2000 is described. The multiprocessor and I/O architecture are examined. The SXO Sure System 2000 expandable operating system is described     

Aging time dependence of catastrophic optical damage (COD) failureof a 0.98-μm GaInAs-GaInP strained quantum-well laser

In this paper, we studied the aging time dependence of the catastrophic optical damage (COD) failure of an Al-free uncoated 0.98-μm GaInAs-GaInP strained quantum-well laser with an injection current as a parameter. Based on the stress-strength model, we first investigated experimentally the dependence of the critical power level (CPL) at which COD would take place upon the aging time. Then applying a statistical treatment to this result, we found for the first time that CPL data at each aging time could be considered to distribute according to the Weibull statistics, and the decrease rate of the CPL with the aging time depended very strongly on the injection current. Finally, using the relationship between the decrease rate of the CPL with the aging time and the current, we predicted roughly the time of a COD failure occurrence for both large and small current cases. As a result, we clarified that for our Al-free uncoated 0.98-μm laser, a COD failure became a fatal problem in the case of a large-current (high-power) operation