Passivation effects of deuterium exposure on boron-doped CVD homoepitaxial diamond

The deuterium (hydrogen) passivation effect on acceptors in boron-doped CVD homoepitaxial diamond was studied by electrical (Hall-effect) and secondary ion mass spectroscopy (SIMS) measurements. Deuterium was incorporated into the samples using microwave (MW) deuterium plasma at 673 K for 2–24 h. We observed the progress of acceptor passivation with p-type conduction, which finally resulted in a highly resistive state.     

Theoretical and Experimental Study of Water Transport in a Hollow Cylinder Applied to the Drying of Round Squid Mantle

Until now, attention has been focused solely in the drying of squid mantle from an experimental point of view, neglecting the transport phenomenon studies of water in squid muscle. This work studies the drying of squid mantle (Loligo brasiliensis), previously salted and smoked by liquid smoking (hickory extract), using a tubular dryer in closed cycle with a silicagel fixed bed in series. The mass transfer phenomenon during drying was studied, based on the Fick's second law, with the effective diffusivity supposed constant, which enabled an analytical solution to the problem. The drying curve calculated with the resulting equation was compared with experimental data. The model was applied to a hollow cylinder geometry (round squid mantle), with its internal surface isolated from the drying environment by a plastic film. The latter was given a tubular form and introduced inside the mantle cavity (impervious wall boundary condition).     

Characteristics of a far-infrared molecular laser optically pumped by a high-power CO2 laser

A molecular far-infrared (FIR) laser optically pumped by a high-power CO₂ laser, which is a powerful source for testing detectors and mixers and for FIR spectroscopy, is constructed and the performance is examined through experiments. At frequencies between 580GHz and 4.25THz, FIR output power is more than 20～30m W by pumping power of 35～81W. Amplitude stability of ±3% is obtained at 100m W output at 2.52THz for over 30 minutes when the FIR tube is cooled at 5°C by a chiller. As an application to testing mixers, FIR laser lines up to 4.25 THz are detected by Schottky barrier diodes (SBD). Further, using a SBD, performance of absolute frequency stability at 693GHz of HCOOH oscillation is measured by harmonic mixing with a 115.5GHz millimeter wave from a phase-locked Gunn oscillator. The resultant center-frequency stability is 100kHz per 10 minutes.     

A sensorless brushless dc motor system

This paper describes a brushless dc motor system without position or speed sensor. The brushless motor consists of a permanent magnet synchronous motor and a voltage-source inverter capable of controlling the amplitude and frequency of voltage. The rectangular-shaped stator current with a conducting interval of 120° (electrical) is controlled to be in phase with the trapezoidal back electromotive force. This results in producing maximum torque. Variable speed is achieved by adjusting the average motor voltage similarly to chopper control of dc motors. In this paper, two sensorless position detecting methods, i.e., an “indirect method” suited for the lower-speed range and a “direct method” suited for the higher-speed range are proposed. The combination of the two makes it possible to detect the rotor position over a wide-speed range. Furthermore, a speed-sen-sorless PLL control is proposed in applying the principle of the direct method. Experimental results obtained from a prototype brushless dc motor are shown to confirm the validity of the sensorless drive. The starting procedure of the motor also is discussed because it is impossible to detect the rotor position at a standstill.     

Ossifying epithelioid hemangioendothelioma

A case of small epithelioid hemangioendothelioma encapsulated by an egg-shaped bony shell composed of newly formed mature lamellar bone is presented. A nodule measuring 10 x 5 x 5 mm was excised from inside of the right cheek muscle of a 46-year-old man. Histopathologically, the nodule consisted mainly of round-to-short spindled epithelioid cells with round nuclei and occasional cytoplasmic vacuoles associated with some foci of osseous metaplasia. Characteristically, egg shell-like lamellar bone enclosed this lesion showing well-circumscribed appearance. The main component cells were immunohistochemically stained positive for factor VIII-related antigen, CD 34, UEA-1, and vimentin, and proved to be vascular endothelial cells. The term ossifying epithelioid hemangioendothelioma is proposed for this unique lesion. This type of epithelioid hemangioendothelioma has not been previously reported to our knowledge, and differentiation from ossifying fibromyxoid tumor of soft parts is considered to be important.     

Effect of rapid sample cooling on efficiency of multiple impurity-atom doping

Shallow and efficient doping of wide band-gap semiconductors has remained one of yet unresolved problems to date. A possible solution to this problem is doping with complexes of a few impurity atoms at a quasi-equilibrium state, which is introduced by controlled cooling of a sample after doping. In this work, (1) we first define a global and quasi-equilibria of our interest based on a simple thermodynamic model for a doped crystal, and then (2) we discuss how the cooling rate affects the probability of impurity-complex formation at a quasi-equilibrium as defined. Our main message is that one should design impurity complexes as small in size as possible which have as large a binding energy as possible. This is a required condition for complex designs when it is difficult to tune the cooling rate.     

Trajectory design considering derivative of jerk for head-positioning of disk drive system with mechanical vibration

In this paper, we propose a novel design method of target trajectory for high-speed and high-precision head positioning of a hard disk drive (HDD) system. To realize smooth acceleration and deceleration, the derivative of jerk is considered not to activate any mechanical vibrations. We applied the well-known optimal control theory to fix the initial and terminal conditions. Moreover, we show that various performances can be improved by introducing time-varying weighting coefficients. Some experimental results using a 2.5-in HDD are shown to verify the effectiveness of the proposed method.     

Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer

Speed estimation methods for sensorless induction motor drives can be divided into two groups. One is based on information about fundamental components of stator currents and voltages. The other is based on high-frequency components injection in stator voltages or currents. The latter may operate stably under zero frequency, which occurs in regenerating mode at low speeds. It, however, causes loss increasing and torque ripple. The former is difficult to operate under zero frequency. The authors propose a stable method categorized in the former group even in regenerating mode at low speeds. The proposed method is based on an adaptive flux observer. First, a new observer gain design is shown. Next, a method avoiding zero-frequency operation with controlling a rotor flux level is proposed.     

Impact of forward bias on electroluminescence efficiency in blue and green InGaN quantum well diodes: A comparative study

Electroluminescence (EL) spectral intensity in the high-brightness blue and green InGaN single-quantum-well (SQW) diodes has been comparatively studied over a wide temperature range and as a function of injection current. When the necessary forward bias conditions to get a certain current level are different, it is found that the anomalous EL quenching previously observed below 100 K for the SQW diodes strongly changes and shows a striking difference between the blue and green SQW diodes. This unusual EL evolution pattern is attributed to both internal and external fields, suggesting the importance of the internal piezoelectric field effects on the efficient carrier capture processes by localized tail states within the SQW under the presence of high-density misfit dislocations.     

Structure of microporous polypropylene sheets containing CaCO3 filler

The microporous polypropylene sheets were prepared by biaxially stretching polypropylene sheets containing CaCO₃ filler (particle size, 0.08–3.0 μm), when the CaCO₃ filler content was 59% by weight and the stretching ratio was 2.8 × 1.8. The microstructure of the sheets were investigated in relation to the CaCO₃ particle size by a N₂ gas permeation method. (1) Effective porosity increases with decreasing mean particle size of filler. (2) The tortuosity factor of the pore is in the range of 25–40 and becomes relatively smaller with decreasing mean particle size of filler. (3) The equivalent pore size becomes relatively smaller with decreasing mean particle size of filler.