Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.     

Mutations in exon 7 and 8 of p53 as poor prognostic factors in patients with non-small cell lung cancer

This study was performed to clarify the different effects of each mutant exon of p53 as indicators of a poor prognosis in patients with non-small cell lung cancer (NSCLC). Tumor tissues of 204 patients with NSCLC were analysed; 96 tumors were stage I, 22 stage II, and 86 stage III. DNA was extracted from frozen specimens and polymerase chain reaction-single strand conformation polymorphism (PCR-SSCP) and direct sequencing were performed to investigate mutations of p53 from exon 5 to exon 8. Seventy-five patients with NSCLC (36.8%) had mutations in p53 which included 72 cases of missense mutations and three cases of non-missense mutations. The overall survival rate of patients with mutant p53 adenocarcinomas was strikingly worse than that of patients whose tumors had wild-type p53 (35.7% vs 53.8%; P=0.041), but no significant difference in survival was found in the patients with NSCLC and squamous cell carcinoma. Mutations in exon 5 of p53 occurred in 33 cases (16.2%), mutation in exon 6 was detected in only one case (0.5%), mutations in exon 7 in 20 cases (9.8%), and mutations in exon 8 in 18 cases (8.8%). The overall survival rate of patients with mutations in exon 7 was worse than that of patients with wild-type p53 in NSCLCs and adenocarcinomas (42.9% vs 56.0%; P=0.025 and 33.3% vs 53.8%; P=0.048, respectively), whereas the overall survival of patients with mutations in exon 5 was almost the same as that of patients with wild-type p53. In addition, the overall survival rate of patients with mutations in exon 8 was strikingly worse than that of patients with wild-type p53 in NSCLCs, adenocarcinomas and squamous cell carcinomas (22.9% vs 56.0%; P<0.001, 19.0% vs 53.8%; P=0.004 and 33.3% vs 62.5%; P=0.042, respectively). Multivariate analysis with the Cox regression model of patients with NSCLC, adenocarcinoma and squamous cell carcinoma indicated that mutations in exon 8 were best correlated with the overall survival rate, followed by lymph node status (P<0.001, P=0.015 and P=0.006, respectively), and mutations in exon 7 of NSCLC were also revealed to have good correlation, followed by lymph node status and mutations in exon 8 (P=0.031). Mutation of p53 was a poor prognostic factor for adenocarcinoma as described previously. Moreover, mutations in exon 8 were more useful indicators of prognosis not only for adenocarcinoma but also for NSCLC. Worse overall survival of the patients with mutations in exon 8 of p53 was suggested to be associated with codon 273 mutations as well as mutations between codon 280 and 285 included into the H2 alpha helix corresponding to residues 278-286. These results suggested that abnormal conformation of H2 alpha helix might play an important role not only in the loss of normal function but also in the acquisition of tumorigenesis. Investigation of mutations in exon 8, especially codon 273 mutation and mutant H2 alpha helix was considered to be a clinically useful approach for determining the prognosis of patients with NSCLC.     

Analysis of low condensed components in condensates of mixtures of β-napthalenesulfonic and β-methylnaphthalenesulfonic acids with formaldehyde

The low condensed components in the condensates of mixtures of β-naphthalenesulfonic acid and β-methylnaphthalenesulfonic acid with formaldehyde were analyzed by high speed liquid chromatography. The main components of monomer and dimer were β-naphthalenesulfonic acid and the dimeric condensate of β-naphthalenesulfonic acid, respectively.     

Effect of matrix's type on the dynamic properties for short fiber-elastomer composite

The dynamic moduli, E′ and E″, and tan δ for PET–CR, PET–EPDM, and PET–UR composites with unidirectional short fibers were studied as a function of temperature by using a Rheovibron. The temperature dependence of tan δ showed three peaks for PET–elastomer composites. The peaks at the low temperature corresponded to the main dispersion of the respective matrixes and the peak at about 140°C to the α-dispersion of PET fiber. A small and broad peak observed at a temperature between 60 and 120°C may be caused by the relaxation of the interface region between fibers and matrix. The longitudinal storage modulus for the composite E was given by the parallel model as \documentclass{article}\pagestyle{empty}\begin{document}$ {\rm E'}_\parallel = V_f \cdot E'_f + V_m \cdot E'_m $\end{document}, where E and E are the storage moduli for fiber and matrix and V_f and V_m are the volume fraction of fiber and matrix, respectively. In the transverse direction of fibers, the composite modulus E was expressed by the logarithmic law of mixing as follows: \documentclass{article}\pagestyle{empty}\begin{document}$ \log E'_ \bot = V_f \cdot \log E'_f + V_m \cdot \log E'_m $\end{document}. The peak values of tan δ from the main dispersion of the respective matrixes were given by the equation, (tan δ_⊥max)_c/(tan δ_max)_m 1 ? β · V_f, where (tan δ_⊥max)_c and (tan δ_max)_m are the maximum values of the loss tangent for the composite and matrix, respectively, and β is coefficient depending on matrix's type. The β value of PET–CR composite is the largest one among those of the composites.     

Desorption of carbon dioxide from supersaturated water in an agitated vessel

The rates of desorption of carbon dioxide from supersaturated water solutions into pure carbon dioxide or nitrogen gas stream were measured at 15,25, and 35°C in a baffled agitated vessel with a flat gas-liquid interface operated in a continuous manner. The volumetric liquid-phase mass transfer coefficients for the bubbles generated in the agitated liquid and the enhancement factors of the volumetric liquid-phase mass transfer coefficient for the free liquid surface due to the bubbling were calculated from the measured desorption rates and correlated as functions of the relative supersaturation of the solution and the liquid-phase Reynolds number.     

Kinetics of DyNi2 film growth by electrochemical implantation

Electrochemical implantation was performed at Ni electrodes to form DyNi₂ films at 0.55 V (vs. Li⁺/Li), 0.62 V, and 0.70 V for 0.5-5.0 h in a molten LiCl-KCl-DyCl₃ (0.50 mol%) system at 700 K. It was found that the DyNi₂ films grew linearly with time with coulomb efficiency of about 100%. The obtained growth rates were higher at more negative potentials, i.e., 0.47 μm min⁻¹ at 0.55 V, 0.32 μm min⁻¹ at 0.62 V, and 0.14 μm min⁻¹ at 0.70 V. On the analogy of the metal oxide growth, the observed rapid and linear growth of DyNi₂ films may be explained by the existence of the outer and inner DyNi₂ layers.     

X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization

The structure of bromine residue compounds was investigated by X-ray absorption fine structure (XAFS) in order to interpret where and how bromine is present in carbons with different degrees of graphitization. The residue compounds can be classified into three groups, as obtained from X-ray absorption near edge structure (XANES) spectra and the values of the intramolecular distance r_Br–Br determined by extended X-ray absorption fine structure (EXAFS). In Group I, prepared from the host carbons heat treated at temperatures higher than 1900 °C, bromine exists in the interlayer space of graphite in the form of Br₂ molecules with interaction of the π electrons of graphite. In Group III, from carbon heat treated at 1000 °C, most of the bromine probably reacts with carbon atoms having a dangling bond or functional groups. For Group II, where the host carbons are heat treated at intermediate temperatures, it is likely that bromine exists in undeveloped defects with a unique electronic state.     

Indentation-induced ductile behavior of glass–ceramics involving layered aluminosilicates

Contact damage in materials is critical in engineering applications because it influences mechanical resistance, such as wear, erosion, and impact failure. Indentation tests were performed using a tungsten carbide ball indenter (Hertzian contact) on the surfaces of glass–ceramics containing hexagonal CaAl₂Si₂O₈ or mica crystals (fluorophlogopite), both of which have a layered structure. The stress–strain relation and the permanent deformation on the surface, as well as the observation of the microcrack zone by X-ray computed tomography using synchrotron radiation, revealed that the glass–ceramic with hexagonal CaAl₂Si₂O₈ showed ductility similar to the quasi-plastic behavior previously observed in the mica glass–ceramic. The yield stresses of the glass–ceramics were estimated from the stress deviating from the stress–strain relation assuming complete elastic response between the ball and the sample. The ratio of the yield stress to Young modulus (Y/E) of the glass–ceramic with hexagonal CaAl₂Si₂O₈ was determined to be higher than that of the mica glass–ceramic.     

Bacterially Secretable Single-Chain Tandem Macrocyclic Peptides for High Affinity and Inhibitory Activity

The inhibition of protein-protein interactions (PPIs) is an effective approach for therapy. Owing to their large binding surface areas to target proteins, macrocyclic peptides are suitable molecules for PPI inhibition. In this study, we developed single-chain tandem macrocyclic peptides (STaMPtides) that inhibits the vascular endothelial growth factor (VEGF) receptor 2 (VEGFR2). They were artificially designed to comprise two different VEGFR2-binding macrocyclic peptides linked in tandem by peptide linkers and secreted by Corynebacterium glutamicum. Most potent VEGFR2-inhibitory STaMPtides with length-optimized linkers exhibited >1000 times stronger inhibitory activity than their parental monomeric peptides, possibly due to the avidity effect of heterodimerization. Our approach of using STaMPtides for PPI inhibition may be used to inhibit other extracellular factors, such as growth factors and cytokines.     

Residual stress versus microstructural effects on the strength and toughness of phase-separated PbO–B2O3–Al2O3 glasses

A few authors have reasonably proposed that liquid–liquid phase-separated (LLPS) glasses could show improved fracture strength, S_f, and toughness, K_Ic, as the second phase could provide a barrier to crack propagation via deflection, bowing, trapping, or bridging. Due to the associated tensile or compressive residual stresses, the second phase could also act as a toughening or a weakening mechanism. In this work, we investigated five glasses of the PbO–B₂O₃–Al₂O₃ system spanning across the miscibility gap: Four of them undergo LLPS—three are binodal (two B₂O₃-rich and one PbO-rich) and one is spinodal—and one does not show LLPS (composition outside the miscibility gap). Their compositions were designed in such a way that the amorphous particles are under compressive residual stresses in some and under tensile residual stresses in others. The following mechanical properties were determined: the Vickers hardness, ball on three balls (B3B) strength, and toughness, K_Ic-SEVNB (single-edge V-notch beam [SEVNB]). The microstructures and compositions were analyzed using scanning electron microscopy with energy-dispersive X-ray spectrometry. The spinodal glass showed, by far, the best mechanical properties. Its K_Ic-SEVNB = 1.6 ± 0.1 MPa m^1/2, which embodies an increase of almost 50% over the B₂O₃-rich binodal composition, and 90% considering the PbO-rich binodal composition. Moreover, its fracture strength, S_f = 166 ± 7 MPa, is one of the highest ones ever reported for an LLPS glass. Fracture analyses evidenced that the spinodal composition exhibited the lowest net stress at the fracture point. Moreover, calculations indicate that the internal residual stress level is the lowest in the spinodal glass. The overall results indicate that the microstructural effect of the spinodal glass is the most significant factor for its superior mechanical properties. This work corroborates the idea that LLPS provides a feasible and stimulating solution to improve the mechanical properties of glasses.