Determination of back-pressure profile for forward extrusion using sequential approximate optimization

This paper proposes a method for determining optimal back-pressure profile in forging of aluminum alloy using a sequential approximate optimization (SAO). In forging, it is important to improve the mold filling for the product quality. In addition, it is preferable to produce a product with a minimum forming energy. To achieve these objectives simultaneously, a forging method with back-pressure profile is proposed. Here, the back-pressure profile implies that the back-pressure varies through the stroke. In this paper, a multi-objective optimization (MOO) problem is formulated. To improve the mold filling, an unfilled area is taken as the first objective function. Furthermore, a forming energy during the forging is taken as the second objective function. Numerical simulation in the forging is so expensive that the SAO using the radial basis function (RBF) network is adopted, and the pareto-frontier is identified with a small number of simulation runs. Based on the numerical result, the experiments are also conducted. It can be found from these results that, the back-pressure profile approach is valid for improving the mold filling as well as the forming energy.     

Activation of Al–Cu–Fe quasicrystalline surface: fabrication of a fine nanocomposite layer with high catalytic performance

A fine layered nanocomposite with a total thickness of about 200 nm was formed on the surface of an Al₆₃Cu₂₅Fe₁₂ quasicrystal (QC). The nanocomposite was found to exhibit high catalytic performance for steam reforming of methanol. The nanocomposite was formed by a self-assembly process, by leaching the Al–Cu–Fe QC using a 5 wt% Na₂CO₃ aqueous solution followed by calcination in air at 873 K. The quasiperiodic nature of theQC played an important role in the formation of such a structure. Its high catalytic activity originated from the presence of highly dispersed copper and iron species, which also suppressed the sintering of nanoparticles.     

Integration of optical waveguide on pneumatic balloon actuator for flexible scanner in endoscopic imaging diagnosis applications

This paper reports a flexible scanner consisting of a scanning actuator and optical waveguides for medical imaging applications such as endoscopic fluorescence imaging diagnosis. The 0.3-mm-thick and 5-mm-wide functional scanner was designed to be smaller enough than the 10 mm-diameter of channel of endoscope. The proposed device can be used to introduce an excitation light into the abdominal cavity or digestive tract. A pneumatic balloon actuator (PBA) consisting of polydimethylsiloxane (PDMS) is used as the scanning actuator for the scanner in consideration of its small, soft, and safe features. The SU-8 optical waveguides with high refractive index (n_SU-8 = 1.575) are integrated onto the PBA structure made of PDMS with a lower refractive index (n_PDMS = 1.405). Excitation light at a wavelength of 405 nm is transmitted through an optical fiber to the SU-8 waveguides. The outgoing light from the waveguide can be scanned by the bending motion of the PBA. The waveguide functions as a detector as well. Our developed device has successfully scanned, excited, and detected light from fluorescence beads at a wavelength of 540 nm distributed in a pseudo-tissue.     

Enhanced hydrogen production from aqueous methanol solution using TiO2/Cu as photocatalysts

The photocatalytic hydrogen production from aqueous methanol solution using titanium dioxide (TiO₂) was investigated in the addition of metal particles including copper, lead, tin, and zinc. The results show that only the addition of copper particles enhances the hydrogen production. The copper usage and reaction temperature were further optimized for TiO₂/Cu photocatalyts. Under the optimal conditions, the hydrogen production using TiO₂/Cu as photocatalysts is approximately 68 times higher than that obtained with only TiO₂.     

Optimal feedback correction in string quartet synchronization

Control of relative timing is critical in ensemble music performance. We hypothesize that players respond to and correct asynchronies in tone onsets that arise from fluctuations in their individual tempos. We propose a first-order linear phase correction model and demonstrate that optimal performance that minimizes asynchrony variance predicts a specific value for the correction gain. In two separate case studies, two internationally recognized string quartets repeatedly performed a short excerpt from the fourth movement of Haydn''s quartet Op. 74 no. 1, with intentional, but unrehearsed, expressive variations in timing. Time series analysis of successive tone onset asynchronies was used to estimate correction gains for all pairs of players. On average, both quartets exhibited near-optimal gain. However, individual gains revealed contrasting patterns of adjustment between some pairs of players. In one quartet, the first violinist exhibited less adjustment to the others compared with their adjustment to her. In the second quartet, the levels of correction by the first violinist matched those exhibited by the others. These correction patterns may be seen as reflecting contrasting strategies of first-violin-led autocracy versus democracy. The time series approach we propose affords a sensitive method for investigating subtle contrasts in music ensemble synchronization.     

Energy cost of pushing a wheelchair on various gradients in young men

This study investigated the effects of pushing a wheelchair on the energy cost of walking (C_w; defined as the ratio of the steady-state oxygen consumption to the walking speed) and economical speed (ES) on the level and ±5% gradients. Eight pairs were formed from twelve young men to minimize variation in body weight between pushing and assisted participants. The State Trait Anxiety Inventory (STAI) test was conducted to evaluate wheelchair occupants' anxiety before and after each trial. The C_w values were significantly higher when pushing a wheelchair on the uphill gradient at more than 45 m/min. ES was significantly lower when pushing a wheelchair on the level (−8.5%) and uphill gradient (−9.1%), but not on the downhill gradient (−0.3%). Individual ES was also estimated using the concept of “Froude number”, and “estimated” ES was significantly correlated with “measured” ES even when pushing a wheelchair on the downhill gradient. The STAI score was not significantly increased except at 105 m/min, regardless of gradient. These results indicated that the fastest walking speed without an enhancement in wheelchair occupants' anxiety corresponds to ES when pushing a wheelchair with a seated occupant on all gradients, at least in young fit men.