Fabrication of Al matrix composite reinforced with submicrometer-sized Al<Subscript>2</Subscript>O<Subscript>3</Subscript> particles formed by combustion reaction between HEMM Al and V<Subscript>2</Subscript>O<Subscript>5</Subscript> composite particles during sintering

To fabricate an Al-V matrix composite reinforced with submicron-sized Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases, high energy mechanical milling (HEMM) and sintering were employed. By increasing the milling time, the size of mechanically milled powder was significantly reduced. In this study, the average powder size of 59 μm for Al, and 178 μm for V₂O₅ decreased with the formation of a new product, Al-Al₂O₃-Al_xV_y, with a size range from 1.3 μm to 2.6 μm formed by the in-situ combustion reaction during sintering of HEM milled Al and V₂O₅ composite powders. The in-situ reaction between Al and V₂O₅ during the HEMM and sintering transformed the Al₂O₃ and Al_xV_y (Al₃V, Al₁₀V) phases. Most of the reduced V reacted with excess the Al to form Al_xV_y (Al₃V, Al₁₀V) with very little V dissolved into Al matrix. By increasing the milling time and weight percentage of V₂O₅, the hardness of the Al-Al₂O₃-Al_xV_y composite sintered at 1173 K increased. The composite fabricated with the HEMM Al-20wt.%V₂O₅ composite powder and sintering at 1173 K for 2 h had the highest hardness.     

Improved Scalar Multiplication on Elliptic Curves Defined over F2mn

We propose two improved scalar multiplication methods on elliptic curves over F_qn where q = 2^m using Frobenius expansion. The scalar multiplication of elliptic curves defined over subfield F_q can be sped up by Frobenius expansion. Previous methods are restricted to the case of a small m. However, when m is small, it is hard to find curves having good cryptographic properties. Our methods are suitable for curves defined over medium‐sized fields, that is, 10 ≤ m ≤ 20. These methods are variants of the conventional multiple‐base binary (MBB) method combined with the window method. One of our methods is for a polynomial basis representation with software implementation, and the other is for a normal basis representation with hardware implementation. Our software experiment shows that it is about 10% faster than the MBB method, which also uses Frobenius expansion, and about 20% faster than the Montgomery method, which is the fastest general method in polynomial basis implementation.     

Threshold‐Based Camera Motion Characterization of MPEG Video

We propose an efficient scheme for camera motion characterization in MPEG‐compressed video. The proposed scheme detects six types of basic camera motions through threshold‐based qualitative interpretation, in which fixed thresholds are applied to motion model parameters estimated from MPEG motion vectors (MVs). The efficiency and robustness of the scheme are validated by the experiment with real compressed video sequences.     

A Multi‐Functional Highly Efficient Upconversion Luminescent Film with an Array of Dielectric Microbeads Decorated with Metal Nanoparticles

Upconversion nanoparticles (UCNPs) have been integrated with photonic platforms to overcome the intrinsically low quantum efficiency limit of upconversion luminescence (UCL). However, platforms based on thin films lack transferability and flexibility, which hinders their broader and more practical application. A plasmonic structure is developed that works as a multi‐functional platform for flexible, transparent, and washable near‐infrared (NIR)‐to‐visible UCL films with ultra‐strong UCL intensity. The platform consists of dielectric microbeads decorated with plasmonic metal nanoparticles on an insulator/metal substrate. Distinct improvements in NIR confinement, visible light extraction, and boosted plasmonic effects for upconversion are observed. With weak NIR excitation, the UCL intensity is higher by three orders of magnitude relative to the reference platform. When the microbeads are organized in a square lattice array, the functionality of the platform can be expanded to wearable and washable UCL films. The platform can be transferred to transparent, flexible, and foldable films and still emit strong UCL with a wide viewing angle.     

Making Large‐Area Titanium Disulfide Films at Reduced Temperature by Balancing the Kinetics of Sulfurization and Roughening

The synthesis of large‐area TiS₂ thin films is reported at temperatures as low as 500 °C using a scalable two‐step method of metal film deposition followed by sulfurization in an H₂S gas furnace. It is demonstrated that the lowest‐achievable sulfurization temperature depends strongly on the oxygen background during sulfurization. This dependence arises because Ti? O bonds present a substantial kinetic and thermodynamic barrier to TiS₂ formation. Lowering the sulfurization temperature is important to make smooth films, and to enable integration of TiS₂ and related transition metal dichalcogenides—including metastable phases and alloys—into device technology.     

Detection of repolarization alternans with an implantable cardioverter defibrillator lead in a porcine model

Mechanistic links have been suggested between repolarization alternans (RPA) and the onset of ventricular tachycardia (VT) and/or fibrillation. Endocardial detection of RPA may, therefore, be an important step in future device-based treatments of arrhythmias. Here, we investigate if RPA could be detected during acute ischemia using an implantable cardioverter defibrillator (ICD) lead (tip to distal coil) located in the right ventricular apex. In 18 pigs, the right coronary (n = 10) or left anterior descending coronary (n = 8) artery was occluded for 10 min using a balloon catheter, followed by reperfusion for 30 min, and re-occlusion for 30 min. RPA magnitude, computed using the modified moving average (MMA) method, showed a sharp increase in all 18 animals, from a mean baseline level of 1.9 +/- 1.3 mV to 3.0 +/- 1.3 mV during first occlusion (p < 0.001). RPA magnitude showed a prominent increase in 10 animals during re-occlusion, from a mean baseline level of 1.7 +/- 1.0 mV to 3.3 +/- 1.5 mV (p < 0.001). The protocol was terminated during the first two stages of occlusion and reperfusion for the remaining 8 animals due to the occurrence of ventricular fibrillation (VF). These results confirm that RPA increases under ischemic conditions and that it is possible to detect and track RPA dynamics with an ICD lead that is positioned in a clinically realistic location. Such an approach may be useful in formulating improved arrhythmia detection and control algorithms.     

Suppression of transient phenomena in hybrid Raman/EDF amplifier

Transient phenomena of hybrid Raman/erbium-doped fiber amplifier (EDFA) upon optical channel add-drop are investigated. The transient responses of surviving channels are resulted from the combined dynamics of Raman amplifier and EDFA. It is shown that the suggested method employing fast gain control of EDFA only can effectively suppress the transient variation of output power. The transient-suppressing hybrid Raman/EDFA is proven to be enough for wavelength-division-multiplexing networks including reconfigurable optical add-drop multiplexer and/or transparent optical cross-connect, if the optical switching speed is carefully chosen.     

Metalorganic Chemical Vapor Deposition of CdTe(133) Epilayers on Si(211) Substrates

Single-crystalline CdTe(133) films have been grown by metalorganic chemical vapor deposition on Si(211) substrates. We studied the effect of various growth parameters on the surface morphology and structural quality of CdTe films. Proper oxide removal from the Si substrate is considered to be the principal factor that influences both the morphology and epitaxial quality of the CdTe films. In order to obtain single-crystalline CdTe(133) films, a two-stage growth method was used, i.e., a low-temperature buffer layer step and a high- temperature growth step. Even when the low-temperature buffer layer shows polycrystalline structure, the overgrown layer shows single-crystalline structure. During the subsequent high-temperature growth, two-dimensional crystallites grow faster than other, randomly distributed crystallites in the buffer layer. This is because the capturing of adatoms by steps occurs more easily due to increased adatom mobility. From the viewpoint of crystallographic orientation, it is assumed that the surface structure of Si(211) consists of (111) terrace and (100) step planes with an interplanar angle of 54.8°. This surface structure may provide many preferable nucleation sites for adatoms compared with nominally flat Si(100) or (111) surfaces. The surface morphology of the resulting films shows macroscopic rectangular-shaped terrace—step structures that are considered to be a (111) terrace with two {112} step planes directed toward 〈110〉.     

Dynamic spectrum management for next-generation DSL systems

The performance of DSL systems is severely constrained by crosstalk due to the electromagnetic coupling among the multiple twisted pairs making up a phone cable. In order to reduce performance loss arising from crosstalk, DSL systems are currently designed under the assumption of worst-case crosstalk scenarios leading to overly conservative DSL deployments. This article presents a new paradigm for DSL system design, which takes into account the multi-user aspects of the DSL transmission environment. Dynamic spectrum management (DSM) departs from the current design philosophy by enabling transceivers to autonomously and dynamically optimize their communication settings with respect to both the channel and the transmissions of neighboring systems. Along with this distributed optimization, when an additional degree of coordination becomes available for future DSL deployment, DSM will allow even greater improvement in DSL performance. Implementations are readily applicable without causing any performance degradation to the existing DSLs under static spectrum management. After providing an overview of the DSM concept, this article reviews two practical DSM methods: iterative water-filling, an autonomous distributed power control method enabling great improvement in performance, which can be implemented through software options in some existing ADSL and VDSL systems; and vectored-DMT, a coordinated transmission/reception technique achieving crosstalk-free communication for DSL systems, which brings within reach the dream of providing universal Internet access at speeds close to 100 Mb/s to 500 m on 1-2 lines and beyond 1 km on 2-4 lines. DSM-capable DSL thus enables the broadband age.