设计企业项目管理信息系统的实现

结合国家“十五”重点科技攻关计划“城市规划、建设、管理与服务数字化工程”项目,天津水泥工业设计研究院承担了其中的“勘察设计企业信息化应用软件示范应用”专题,并获批立项,签署了专题任务书。两年来,院项目实施小组和软件公司进行了长期、紧密的合作,遵照标准化、系统化和集成化的原则,共同搭建了“工程协同设计管理平台”。在软件功能上,实现了设计企业管理信息系统的主要功能;在软件技术上,采用了目前最流行的软件技术,结合现代项目管理方法,为设计企业提供了组态灵活,方便实用,具有良好扩展性及开放性的软件产品。目前,该系统已经在部分工程项目上全面运行,取得了预期的效果。     

Irganox(R) HP-136的抗氧化机理及对聚丙烯加工稳定性的影响

介绍了Irganox(R) HP-136在PP加工中的作用,表明它能有效地捕获烷基自由基,与传统的受阻酚类及亚磷酸酯类抗氧剂复配与传统的二元抗氧稳定体系相比,具有添加量少、抗氧性能优等优点.比较了Irganox(R) HP-136(3-芳基-苯并呋喃酮)与传统抗氧剂的抗氧机理,并分析了在聚合物稳定体系中的作用.     

Cu2O-CuAlO2-Cu基金属陶瓷导电性能研究

通过热压技术制备Cu2O-10CuAlO2-xCu金属陶瓷材料，并对其导电性能进行了研究。结果表明，Cu2O-10CuAlO2-xCu在Cu含量超过15wt．％后呈金属导电性。材料的微观结构观察及物理性能测试表明，金属陶瓷材料的电导率不仅取决于材料的金属相含量，还取决于金属相颗粒尺寸和孔隙率的大小。材料中金属相的颗粒尺寸取决于热压工艺参数，随着热压温度的升高而增大，但随热压压力的升高而减小。     

一水合硫酸氢钠催化β-萘甲醚的合成

利用一水合硫酸氢钠催化合成 β 萘甲醚 ,3 6 gβ 萘酚 ,3ml甲醇 ,1 5g一水合硫酸氢钠 ,80℃反应5h ,HPLC分析产率达 78 3%。固体催化剂容易过滤分离。     

湿式氨法脱硫工艺及应用

随着二氧化硫对环境的污染越来越严重,国家环保总局对烟气二氧化硫排放控制严格,烟气脱硫显得日益重要。简单介绍了湿式氨法烟气脱硫技术的工艺流程及实际应用情况。湿式氨法脱硫工艺具有原料易得、脱硫塔不易结垢、不产生废水、副产品硫酸铵可作为农用肥料,减少了对环境的二次污染等特点,是较适合我国国情的烟气脱硫技术。     

Generalized Transfer Subspace Learning Through Low-Rank Constraint

It is expensive to obtain labeled real-world visual data for use in training of supervised algorithms. Therefore, it is valuable to leverage existing databases of labeled data. However, the data in the source databases is often obtained under conditions that differ from those in the new task. Transfer learning provides techniques for transferring learned knowledge from a source domain to a target domain by finding a mapping between them. In this paper, we discuss a method for projecting both source and target data to a generalized subspace where each target sample can be represented by some combination of source samples. By employing a low-rank constraint during this transfer, the structure of source and target domains are preserved. This approach has three benefits. First, good alignment between the domains is ensured through the use of only relevant data in some subspace of the source domain in reconstructing the data in the target domain. Second, the discriminative power of the source domain is naturally passed on to the target domain. Third, noisy information will be filtered out during knowledge transfer. Extensive experiments on synthetic data, and important computer vision problems such as face recognition application and visual domain adaptation for object recognition demonstrate the superiority of the proposed approach over the existing, well-established methods.     

New approach for the preparation of nanoporous polyorganosilicate low‐k films

The distribution of pores and the mechanical properties of materials are the key factors in preparing satisfactory low‐k films. In the present study, a kind of silsesquioxane‐polyethylene glycol (SSQ‐PEG) was synthesized and used as a template to make the distribution of pores more even in the low‐k films. The crosslinking density of films could be adjusted by the sol‐gel of tetramethoxysilane/dimethoxydimethylsilane with various proportions. The porosity of films could also be adjusted with different proportions of pendant PEG chains introduced. A dielectric constant as low as 2.1 had been achieved for nanoporous polyorganosilicate films with good tenacity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1238–1243, 2007     

Cu2O/Cu Cermet as a Candidate Inert Anode for Al Production

Cu₂O/ x Cu ( x =0–25 wt%) cermets were evaluated as a novel partially inert anode for aluminum (Al) production. The physical and mechanical properties, including the compressive strength, flexural strength, thermal expansion coefficient, thermal conductivity, and dc electrical conductivity were tested at room temperature and at temperatures up to 950°C. The coefficient of thermal expansion, compressive strength, flexural strength, thermal conductivity, and electrical conductivity of Cu₂O/Cu cermets increased with increasing Cu content. High-temperature electrical conductivity measurements showed that with increasing temperature, the electrical conductivity increased when the Cu content was below the percolation threshold, while it decreased when the Cu content was above the percolation threshold. A relatively stable CuAlO₂ layer formed on the cermet surface during electrochemical testing, and the corrosion rate of this anode was estimated to be about 1.8–1.9 cm/year in Al production.     

非晶态化学镀Ni-Sn-P合金镀层变温晶化的研究

研究了非晶态Ni-Sn-P合金镀层的变温化过程,由实验得出Ni-Sn-P合金约在350℃开始晶化,450℃左右晶化结束,并测得Ni-Sn-P合金变温晶化激活能为233KJ·moL~(-1)。     

3000m~3/h排烟循环流化床脱硫工艺中试实验研究

介绍了采用真实烟气的 30 0 0m3 /h排烟循环流化床烟气脱硫工艺 (CFB FGD)及其中间试验装置 ,通过实验研究了钙硫摩尔比 (Ca/S)、近绝热饱和温度差 (ΔT)、烟气湿度、喷水量、入口SO2 浓度、浆液雾化质量、脱硫灰循环等对脱硫效果的影响。实验表明 ,CFB FGD工艺在停留时间小于 6s、烟气流速v =4— 6m/s、Ca/S =1.2、ΔT =10— 12℃时可实现高达 90 %的脱硫效率。