Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

一种新型特级防火卷帘的研究与开发——3J特级防火卷帘

介绍3J特级防火卷帘的各种重要功能特点,讨论其实用性与易用性以及推广该产品的必要性与可行性。     

Architectural Control of Hierarchical Nanobelt Superstructures in Catanionic Reverse Micelles

BaXO₄ (X = Mo, W) nanobelts and a variety of hierarchical superstructures assembled from the nanobelts have been synthesized in a catanionic reverse‐micelle system. The effects of various factors, such as the mixing ratio (r) between the anionic and cationic surfactants, the temperature, and the presence of polymeric additives, on the formation of the nanobelts and their hierarchical assembly have been examined in detail. In particular, r has been shown to be powerful in modulating the formation and assembly of the BaMoO₄ and BaWO₄ nanobelts. Architectural control of the penniform nanobelt superstructures has been readily achieved by changing the experimental parameters. A plausible two‐stage growth mechanism has been proposed for the formation of penniform BaXO₄ nanobelt superstructures in catanionic reverse micelles.     

MHD simulation of high-current subsonic vacuum arc under different distributed axial magnetic fields

Based on two-temperature magnetic hydrodynamic (MHD) model, the influence of saddle-shaped distributed axial magnetic field (AMF, linearly increases along radial position) and bell-shaped distributed AMF (linearly decreases along radial position) on plasma loss and heat flux density to anode in subsonic high-current vacuum arc (HCVA) is simulated and analyzed. According to the simulation results, the saddle-shaped AMF can more effectively inhibit plasma loss from arc column than that of bell-shaped AMF. Comparisons between simulation results and experimental results further verify the correctness of model and simulation.     

8字形管角部裂纹问题研究

冷弯异型管在角部存在应力集中现象，有时存在裂纹倾向。通过对沈阳东洋异型管有限公司一异型管产品——8字形管产生裂纹的原因进行分析，确定了解决方案：①修理轧辊，加大有开裂倾向的内陷角；②选用塑性更好的板材。实践证明，该措施能有效地防止管角角部裂纹的产生。     

回龙电站地下厂房开挖施工技术

回龙电站地下厂房设计开挖尺寸为112m×42m×16m(长×高×宽),采用岩壁吊车梁新型结构形式。厂房结构布置自上而下共分6层,结构复杂;施工面相互交叉,干扰因素多,爆破施工安全隐患大。通过精心组织,结合优质的施工技术和周密的措施,较好地完成了开挖任务。图1幅,表3个。     

A NEW LARGE CAVITATION CHANNEL IN CHINA SHIP SCIENTIFIC RESEARCH CENTER

1 .　INTRODUCTIONIntherecentdecades ,itisrealizedthatitisquitenecessarytocarryouttestsathighReynoldsnumberwithalowbackgroundnoiselevelinordertomeetmoreandmoreurgentneedsofmodernnavyandmaritimeindustry .Anewlargecavita tionchannelisdevelopedinCSSRCfortestingcompletehull/ propulsor/appendagesarrange ments[1] .Itrepresentsoneofthelatestintechno logicallyadvancedlargecavitationtestfacilities.Inthefollowingsections ,thefeaturesandthefirsttestresultsofthechannelwillbedescribed .2 .　DICRIP…     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

IEEE 802.11 roaming and authentication in wireless LAN/cellular mobile networks

A wireless LAN service integration architecture based on current wireless LAN hot spots is proposed so that migration to a new service becomes easier and cost effective. The proposed architecture offers wireless LAN seamless roaming in wireless LAN/cellular mobile networks. In addition, a link-layer-assisted mobile IP handoff mechanism is introduced to improve the network/domain switching quality in terms of handoff delay and packet loss. An application layer end-to-end authentication and key negotiation scheme is proposed to overcome the open-air connection problem existing in wireless LAN deployment. The scheme provides a general solution for Internet applications running on a mobile station under various authentication scenarios and keeps the communications private to other wireless LAN users and foreign network. A functional demonstration of the scheme is given. The research results can contribute to rapid deployment of wireless LANs.