Synthesis of boron nitride from triammoniadecaborane and hydrazine under pressure

Boron nitride (BN) of low crystallinity was synthesized from triammoniadecaborane (TAD) and hydrazine at 125 MPa below 650° C. TAD itself was pyrolysed at 600° C and 125 MPa to form a mixture of amorphous boron and boron nitride containing BH and NH bonds. The infrared spectrum of the pyrolysed product of TAD itself at 600° C and 125 MPa showed the BNB absorption at 800cm^–1 due to the formation of B₃N₃ structures. The X-ray diffraction (XRD) of the reaction product from TAD and hydrazine at 600° C had broad diffractions centred at 2=25.5° and 43.0° (CuK). The BH absorption at 2500cm^–1 decreased in intensity on increasing the N/B ratio from 0.3 to 0.85, and disappeared finally at a ratio of N/B=1.3. The reaction product at 125 MPa had a porous structure. The electron diffraction of the specimen changed from faint rings to spots on circular rings after heat treatment at 800° C for 10 h. The heat-treated specimen, however, did not give sharp reflections corresponding to hexagonal BN in the XRD profile. BN of low crystallinity was transferred to cubic BN at 1200° C and 6.5 GPa in a 90% yield, which was higher than that of well-crystallized BN in the presence of AIN.     

Preparation of TiB2 sintered compacts by hot pressing

A sintered compact of titanium diboride (TiB₂) was prepared by hot pressing of the synthesized TiB₂ powder, which was obtained by a solid-state reaction between TiN and amorphous boron. Densification of the sintered compact occurred at 20 MPa and 1800° C for 5 to 60 min with the aid of a reaction sintering, including the TiB₂ formation reaction between excess 20 at % amorphous boron in the as-synthesized powder (TiB₂ + 0.2B) and intentionally added 10 at % titanium metal. A homogeneous sintered compact of a single phase of TiB₂, which was prepared by hot pressing for 30 min from the starting powder composition [(TiB₂ + 0.2B) + 0.1 Ti], had a fine-grained microstructure composed of TiB₂ grains with diameters of 2 to 3 m. The bulk density was 4.47 g cm^–3, i.e. 98% of the theoretical density. The microhardness, transverse rupture strength and fracture toughness of the TiB₂ sintered compact were 2850 kg mm^–2, 48 kg mm^–2 and 2.4 MN m^–3/2, respectively. The thermal expansion coefficient increased with increasing temperature up to 400° C and had a constant value of 8.8 x 10^–6 deg^–1 above 500° C.     

Hydrogen generation from water, methane, and methanol with nonthermal plasma

Hydrogen generation from water, methane, and methanol was investigated with different types of nonthermal plasma reactors under different conditions. With a ferroelectric packed-bed reactor in N/sub 2/, hydrogen gas yield decreased in the order: methanol > methane > water. A similar trend was observed with a silent discharge plasma reactor, but H/sub 2/ yields were much lower with the latter reactor. At fixed specific energy densities, higher H/sub 2/ yields were obtained at higher gas flow rates in the reactions of the above substrates. The initial water concentration was optimized at ca. 2.0% to obtain the highest rate for H/sub 2/ formation. Under the same conditions, H/sub 2/ yield decreased in the order: Ar>N/sub 2/>air/spl ap/O/sub 2/. The ferroelectric packed-bed reactor could be operated continuously for 10 h without any decrease in its performance in the H/sub 2/ generation from water.     

Acceptor recognition of kojibiose phosphorylase from Thermoanaerobacter brockii: syntheses of glycosyl glycerol and myo-inositol

The glucosyl transfer reaction of kojibiose phosphorylase (KP; EC 2.4.1.230) was examined using glycerol or myo-inositol as an acceptor. In the case of glycerol, KP produced two main transfer products: saccharides A and B. The structure of saccharide A was O-alpha-D-glucopyranosyl-(1-->1)-glycerol and that of saccharide B was O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->1)-glycerol. These results show that KP transferred a glucose residue to the hydroxyl group at position 1 of glycerol. On the other hand, when myo-inositol was used as an acceptor, KP produced four transfer products: saccharides 1-4. The structures of saccharides 1 and 2 were O-alpha-D-glucopyranosyl-(1-->1)- and O-alpha-D-glucopyranosyl-(1-->5)-myo-inositol, respectively; those of saccharides 3 and 4 were O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->1)- and O-alpha-D-glucopyranosyl-(1-->2)-O-alpha-D-glucopyranosyl-(1-->5)-myo-inositol, respectively. KP transferred a glucose residue to the hydroxyl group at position 1 or 5 of myo-inositol. On the basis of the structures of their glucosyl transfer products, glycerol and myo-inositol were found to have a common structure with three hydroxyl groups corresponding to the hydroxyl group of the glucose molecule at positions 2, 3 and 4. The conformation of these three hydroxyl groups in the structure is equatorial. This structure is the substrate recognition site of KP. It has been suggested that KP strictly recognizes the structures of glycerol and myo-inositol, and catalyzes the transfer reaction of a glucose residue to the hydroxyl group at position 1 in glycerol, and at position 1 or 5 in myo-inositol, corresponding to position 2 in glucose.     

Mechanism of Magnetite Seam Formation and its Role for FeO Scale Transformation

The phase transformation behavior of a thermally grown oxide scale of FeO on pure-Fe and an Fe–2wt%Au alloy was investigated. Particular attention was paid to formation of a magnetite seam, which is the Fe₃O₄ layer formed at the FeO/alloy interface at an initial stage of the phase transformation, since it has important effects on the overall phase transformation of FeO scale. A thin Au(Fe) layer was found to develop on the Fe–Au alloy at the FeO/alloy interface after 32 min of oxidation at 750 °C in air. This Au(Fe) layer prevented formation of a magnetite seam and accelerated the FeO eutectoid reaction. The Au(Fe) layer acted as a “chemical diffusion barrier” for inward diffusion of Fe from the FeO to the alloy substrate across the FeO/alloy interface and prevented magnetite seam formation.     

Tensile strength and morphological investigation of SiC-coated carbon fibers

SiC-coated film onto carbon fibers as a barrier of oxidation resistance and reaction between carbon fibers and metals was investigated. The chemical vapor deposition of silicon carbide onto carbon fibers was performed at various temperatures ranging from 700 to 1000°C using triisopropylsilane vapor carried by hydrogen gas. The strength of the SiC-coated carbon fibers was decreased due to deterioration of fibers and chemical attack of hydrogen on the surface of carbon fibers during the coating process. The oxidation and the thermal resistance of the SiC-coated carbon fibers compared to the uncoated carbon fibers were improved at temperature range of 600–800°C and 1000–1200°C, respectively. Morphological change by air oxidation at temperature range of 500–800‡C was also investigated for the SiC-coated and the uncoated carbon fibers, respectively. The SiC-coated film between carbon fiber and aluminum was sufficient as a barrier of reaction on carbon fiber reinforced aluminum at temperature of above 1000°C.     

Modeling Party Support of Japanese Voters in the Early 1996

This article investigates factors that influenced Japanese voters in the early 1996 in determining which political party to support. Proportional-odds model, a model which retains ordinal nature of political hues or ideologies of the Japanese political parties, is fitted to the data. Samples with answers “I do not know” to the questions are treated as missing. The EM algorithm enables us to incorporate the samples with missing-values. We found that determining which party to support is a purely political decision for Japanese voters based solely on their ideologies and attitude towards the current cabinet, not to be influenced by their geographical profiles nor financial situations. Missing-value problem were found not to be ignored in the sense that marginally significant or insignificant explanatory variables can easily turn otherwise when the same model is fitted only for the data with no missing-values.

     

On the formation of solid solution in Co3−xMnxO4 system

The formation of solid solution in the Co_3−xMn_xO₄ system in atmospheres of oxygen, air and argon was examined at a constant temperature of 1000 °C. In oxygen, a small amount of the NaCl-type compound was found to co-exist with the cubic spinel in the composition rangex≤0.1. A single phase of the cubic spinel was found in the range 0.1 to 1.3 and the tetragonal spinel above 1.9. In the rangex=1.3 to 1.9 where the cubic and tetragonal spinels co-exist they both have very broadened diffraction line profiles. In air, the identified phases and the changes in their lattice constants with composition were very similar to those in oxygen, except that the NaCl-type compound and the cubic spinel co-existed over a larger range. In argon, the cubic spinel was not observed over any of the composition range and the NaCI-type compound and the tetragonal spinel co-existed in the wide range of 1.1 to 2.3. The experimental results are discussed with regard to the cation distribution in the spinel and also to the relative stability of Co³⁺- and Mn³⁺-ions under the low partial pressure of oxygen.     

Comparison of enteral nutrition with combined enteral and parenteral nutrition in post-pancreaticoduodenectomy patients: a pilot study

Background  

Many clinical studies have demonstrated that early postoperative enteral nutrition (EN) improved the postroperative course. Post-pancreaticoduodenectomy (PD), patients tend to suffer from postoperative nausea, abdominal distention, and diarrhoea, causing difficulty in the introduction of EN. In this pilot study, we investigated the appropriate nutritional mode post-pancreatic surgery.     

Synthesis and properties of carbons dispersed with α-iron particles from divinylbenzene-vinylferrocene

α-Iron-dispersed carbon was synthesized, through pressure pyrolysis of divinylbenzene-vinylferrocene above 750°C, and by reduction of magnetite-dispersed carbon. Divinylbenzenevinylferrocene copolymer was pyrolysed at 125 MPa above 750°C to yield carbons dispersed with α-iron accompanied by cementite. Magnetite in the carbon matrix was reduced to α-iron after heat treatments at 500°C in a flow of hydrogen. Carbons synthesized by the pressure pyrolysis of divinylbenzene-vinylferrocene at 800°C and 125 MPa contained iron-compound particles up to 200 nm, whereas the median diameter of α-iron particles in the carbon matrix after reduction treatments was 20 nm. α-Iron-dispersed carbon had a Curie temperature of 770°C. The saturation magnetization of iron-dispersed carbon increased with increasing the pyrolysis temperature of divinylbenzene-vinylferrocene copolymer, and reached a constant value of 183 e.m.u.g⁻¹ at 800°C. The saturation magnetization of α-iron-dispersed carbon after the reduction treatment revealed practically the theoretical value of α-iron. Carbons finely dispersed with only α-iron particles were synthesized successfully by reduction of magnetitedispersed carbons.