Kinetic parameters of the electrode reaction of chloropenta-amminecobalt(III) ions at a gold electrode

The cathodic reduction of chloropenta-amminecobalt(III) ions at active gold electrodes has been studied in 0.1 M HClO₄ + 0.1 M NaClO₄ by means of the potentiostatic method. Chloropentaamminecobalt(III) ions gave one irreversible reduction wave in the double layer potential region of gold electrodes. The kinetic parameters of the electrode reaction were measured at 5, 15, 25, 35 and 45°C, and the activation energy was calculated to be 19 kcal mol^?1 for the electron transfer process and 4.5 kcal mol^?1 for the diffusion process.     

Contact and interconnect formation on compound semiconductor devices by ionized-cluster beam deposition

A new deposition technology, namely the ionized-cluster beam deposition method, was applied to form contacts and interconnects on III–V compound semiconductor devices. Au alloy films deposited by this technology had strong enough adhesion to an insulator layer to be a satisfactory interconnection. A step approximately 8 μm high at an angle of 90° to the semiconductor was covered fully with an Au alloy film obtained by this method. Electrical ohmic contacts for p-type GaP and GaAs were successfully obtained at substrate temperatures of 400 °C and 300 °C respectively without any further annealing process; this resulted in better device characteristics because of the lower process temperatures and also made the device less expensive because of a reduction in fabrication time.     

Changes in flagellar bending during the course of hyperactivation in hamster spermatozoa

The motility pattern of mammalian spermatozoa changes during migration in the female genital tract and during incubation in vitro. This change in motility is termed hyperactivation. Hyperactivated spermatozoa swim vigorously in 'whiplash', 'figure-8' or 'small circle' trajectories. In this study, a quantitative analysis was carried out of the changes in the motility pattern of hamster spermatozoa during incubation to investigate the mechanism regulating hyperactivation. In the culture system used in this study, hyperactivation occurred 4 h after incubation. Several parameters in the analysis of sperm movement pattern were examined. Curvilinear velocity, average path velocity and straightness abruptly increased between 2 and 4 h. However, linearity, amplitude of lateral head displacement, beat cross frequency and average wavelength gradually changed with time. In the analysis of flagellar bending, the bend angles were measured after dividing images of the flagellum into short lengths. Flagellar bending changed in different manners in each region during incubation. The asymmetry in the direction of the curve of the head gradually increased with time in the first half of the flagellum. The flexibility, which was determined using the amplitude of bending and the rate of change in bend angles, abruptly decreased between 10 min and 1 h, and then increased between 2 and 4 h in the first half of flagellum. These results indicate that complex physiological changes occur before hyperactivation.     

Characterization of polymer-adhesive interfaces on a nanometre scale by elemental mapping and image EELS using EFTEM

Energy-filtering transmission electron microscopy (EFTEM) was applied for investigating interfaces between a polymer and an adhesive. The sample employed in this work is polybutylene terephtharate (PBT) sheets laminated with an epoxy adhesive. It was found that heat aging of the PBT at 180 degrees C in air for > 9 h prior to adhesion decreases the adhesion strength drastically. To investigate this unfavourable aging effect on the adhesion strength, we performed elemental mapping and image EELS using EFTEM. A weak boundary layer with a thickness of < 50 nm was visualized at the PBT-adhesive interface by elemental mapping in the sample subjected to the heat aging and image EELS revealed the origin of this layer. Thus, we clearly correlated the nanoscale interfacial structure with the adhesion strength by EFTEM.     

Grazing exit electron probe microanalysis of submicrometer inclusions in metallic materials

Grazing exit electron probe microanalysis (GE-EPMA) is a new method of EPMA in which characteristic X-rays emitted from only near-surface regions of a specimen are detected at extremely low exit angles near 0 degrees (the grazing exit condition). This technique requires the analytical objects exist on a flat surface. Therefore, the GE-EPMA analysis has been used only for the analysis of particles or a thin film on a flat substrate so that there were only few applications for practical analysis. As a new application, we have carried out GE-EPMA analysis of approximately 0.2-microm inclusions on stainless steel, which appeared to be a projection on the specimen surface with chemical etching. The GE-EPMA quantitative results were in excellent agreement with those of inclusions that were extracted from the stainless steel and analyzed by EPMA with conventional exit condition (30 degrees). This method could be, therefore, applied to the analysis of the submicrometer inclusion in a wide variety of metallic materials if the inclusion appears to be a projection with chemical etching treatment.     

Experimental exploration of discrepancies in F-number correlation of flammability limits

Flammability limits measurement has been made by ASHRAE method for some 20 kinds of combustible gases and vapors. These compounds have been selected mainly because the literature values of flammability limits are not consistent with the F-number calculated ones [J. Hazard. Mater. A 82 (2001) 113]. As a result, it has been found that the newly obtained values of flammable range are classified into three groups. For the first group of compounds, the present values agree well to the literature values. For the second group, the present values do not agree to the literature values but agree with the calculated ones. For the third group ones, the present values neither agree to the literature values nor to the calculated ones. There are 4, 13, and 6 compounds in the respective groups.     

The study of metal ion release and cytotoxicity in Co–Cr–Mo and Ti–Al–V alloy in total knee prosthesis – scanning electron microscopic observation

We surgically retrieved two cobalt(Co)–chromium(Cr)–molybdenum(Mo) and five titanium(Ti)–aluminum(Al)–vanadium(V) alloy knee prostheses from patients because of mechanical failure and pain. We examined the distribution of the small particles which were released from the Co–Cr–Mo and Ti–Al–V alloys using a backscattered scanning electron microscopy (SEM). In addition we analyzed the metals in the artificial knee joints and the tissues adjacent to them using energy dispersive X-ray spectroscopy (EDS). We demonstrated that a myriad of fine particles, produced by the abrasion of both Co–Cr–Mo and Ti–Al–V alloys, accumulated in the synovial cells. As Co–Cr–Mo alloys disintegrate easily in the cells, Co dissolves from the peripheral areas of them, although Cr remains within the cells. In contrast Ti–Al–V alloys are very stable in the synovial cells. From these findings we conclude that the Co–Cr–Mo alloys are hazardous to the body as the alloys release Co which enters the body. In contrast the Ti–Al–V alloys are very stable and are patently safer. Artificial joints, however, are still in considerable need of improvement.     

Microassembly of semiconductor three-dimensional photonic crystals

Electronic devices and their highly integrated components formed from semiconductor crystals contain complex three-dimensional (3D) arrangements of elements and wiring. Photonic crystals, being analogous to semiconductor crystals, are expected to require a 3D structure to form successful optoelectronic devices. Here, we report a novel fabrication technology for a semiconductor 3D photonic crystal by uniting integrated circuit processing technology with micromanipulation. Four- to twenty-layered (five periods) crystals, including one with a controlled defect, for infrared wavelengths of 3-4.5 microm, were integrated at predetermined positions on a chip (structural error <50 nm). Numerical calculations revealed that a transmission peak observed at the upper frequency edge of the bandgap originated from the excitation of a resonant guided mode in the defective layers. Despite their importance, detailed discussions on the defective modes of 3D photonic crystals for such short wavelengths have not been reported before. This technology offers great potential for the production of optical wavelength photonic crystal devices.     

Bond-order potential for transition metal carbide cluster for the growth simulation of a single-walled carbon nanotube

A classical many-body potential for transition metal carbide cluster is developed in the form of the bond-order type potential function. The parameter sets between carbon atoms and several transition metal atoms (Fe, Co and Ni) are constructed by fitting binding energies from Density Functional Theory (DFT) calculations. Using the potential function, clustering process of carbon atoms to a small metal cluster is studied by classical molecular dynamics (MD) simulation. The number of hexagonal rings in the Co cluster increases about twice as fast as in the Fe cluster. This implies that the graphitic lattice interacts more strongly with Co atoms than with Fe atoms. A Co cluster has a crystal structure where metal atoms are regularly allocated and embedded in the hexagonal carbon network in the simulation. In contrast, carbon atoms cover the entire surface in case of the Fe cluster. Additionally, the potential energy surface that a carbon atom feels from a 2D closed-packed facet is examined using a hypothetical FCC(1 1 1) facet of several transition metals. The potential energy minima are distributed on the hexagonal network showing the 2D closed-packed facet can be a template where a graphene is formed.     

Optical Burst Switching Router With 40-,10-Gb/s Bit-Rate Transparent Contention Resolution

We report a bit-rate transparent optical burst switching (OBS) router prototype using a fast 5 times 5 PLZT [(Pb,La)(Zr,Ti)O₃ ] optical matrix switch. Dynamic switching in a two-wavelength, 2 times 2 OBS switch is demonstrated. Contention resolution using a tunable Mach-Zehnder interferometer wavelength converter for both 40- and 10-Gb/s bursts is demonstrated for the first time. Error-free operation was achieved for both bit rates under the same settings, as required in autonomous networks