Analysis and Design of a Dynamic Predistorter for WCDMA Handset Power Amplifiers

This paper presents a dynamic predistorter (PD), which linearizes the dynamic AM-AM and AM-PM of a wideband code division multiple access handset power amplifier (PA). The dynamic PD allows an adjacent channel leakage power ratio (ACPR) improvement of 15.7 dB, which is superior to conventional PDs that linearize static AM-AM and AM-PM. The dynamic PD was designed using an HBT generating nonlinearity, a short circuit at the baseband (les4 MHz), and a load circuit for the HBT at the RF fundamental band (ap1.95 GHz). Volterra-series analysis was performed to understand the mechanism of the dynamic PD. The analysis revealed that the short circuit at the baseband enabled the dynamic PD generating third-order intermodulation distortion (IMD3) with opposite phase to the fundamental tone (i.e., antiphase IMD3). The antiphase IMD3 allows dynamic gain compression, which linearizes the dynamic gain expansion of a PA with low quiescent current. The analysis also revealed that the IMD3 amplitude of the dynamic PD can be adjusted by load impedance at the RF fundamental band, which enables the gradient of dynamic AM-AM and AM-PM to be optimized to linearize the PA. The fabricated two-stage InGaP/GaAs HBT PA module with the dynamic PD exhibited an ACPR of -40 dBc and a power-added efficiency of 50% at an average output power of 26.8 dBm with a quiescent current of 20 mA     

High-Speed X-Cut Thin-Sheet LiNbO3 Optical Modulator With Folded Structure

We propose a small-footprint X-cut thin-sheet lithium niobate optical modulator with high-speed and low-driving-voltage characteristics. Since an optical waveguide is folded by a mirror placed at one edge of the modulation chip, the chip can be shortened by about half. In addition, a wide modulation bandwidth can be achieved, because the path-length difference between the optical waveguide and the coplanar-waveguide (CPW) electrode is decreased to as short as possible by placing the CPW electrode as far as possible along the optical waveguide in the folded portion, and the microwave effective index is set to realize effective velocity matching between the lightwave and the microwave. A small footprint of 1.78 times 29 mm, a low half-wave voltage of 2.0 V at dc, and a 3-dBe modulation bandwidth of 20 GHz were obtained.     

A Test Statistic in Canonical Correlation Analysis for Categorical Variables

In canonical correlation analysis (CCA), it is important to estimate the number of nonzero canonical correlations in the population. One way to estimate the number is to consider the dimensionality testing problem. In CCA for continuous variables, some test statistics for the problem have been derived under the normality assumption. However, there are only a few papers on test statistics in CCA for categorical variables.

In this article, a test statistic in CCA for categorical variables is suggested. The test statistic is derived from the rational used for continuous variables. Some properties of the test statistic are examined through mathematical investigations and numerical simulations.

     

电动汽车稳定性控制中的车体侧偏角观测器研究

采用轮毂电机独立驱动的电动汽车可采用直接横摆力矩控制(Direct Yaw-moment Control,DYC)等稳定性控制,而车体侧偏角(简称β角)是稳定性控制中的重要参数.直接测定车体侧偏角的传感器相当昂贵,所以需要从能够容易测得的参数来进行车体侧偏角的推测.Hori研究室设计了一种用于β角推测的观测器,并充分考虑了车辆运行工况变化所引起的系统模型参数变化,进行了观测器鲁棒性设计以及轮胎侧偏刚度在线辨识,使观测器具备了足够的鲁棒性来克服大的模型误差影响,试验结果证明了该观测器的有效性.     

Discharge characteristics and low‐voltage driving of high‐Xe‐content PDPs

Abstract— High‐Xe‐content PDPs attain improved luminous efficiency, but with sacrifices of higher sustain and address voltages and slower discharge build‐up. By examining PDPs with 3.5–100% Xe contents, it was revealed that space‐charge priming as well as wall‐charge accumulation are effective in obtaining low‐voltage and high‐speed operation. In addition, it was found that the effectiveness is emphasized for higher‐Xe‐pressure PDPs. In this respect, erase addressing is more favorable than write addressing, especially for high‐Xe‐pressure PDPs. The formative time lag of the discharge and diffusion/drift of the space charges are shorter for high Xe contents. In this respect, high‐Xe‐content PDPs have a potential for high‐speed addressing, if driven adequately. The use of space‐charge priming, however, is limited by the duration between the priming and scan pulses. Accumulation of wall charges is limited by ignition of a self‐erase discharge with which all the wall charges are dissipated. Although the highest efficiency and luminance are attained with a 100%‐Xe panel, the optimum Xe gas content, considering the sustain pulse voltage and drive voltage margin, would be 70% Xe + Ne.     

Growth monitoring and classification of rice fields using multitemporal RADARSAT-2 full-polarimetric data

Spaceborne synthetic aperture radar (SAR) can be used for agricultural monitoring. In this study, three single-polarimetric and four full-polarimetric observation data sets were analysed. A rice paddy field in northern Japan was used as the study site; the data for this site were obtained using RADARSAT-2, which carries a full-polarimetric C-band SAR. Soybean and grass fields were also present within the paddy fields. The temporal change in the backscattering coefficient of the rice paddy fields for the single-polarization data agreed with the temporal change obtained for a rice growth model based on radiative transfer theory. A three-component decomposition approach was applied to the full-polarimetric data. With each rice growth stage, the volume scattering component ratio increased, whereas the surface scattering component ratio generally decreased. The soybean and grass fields showed a smaller double-bounce scattering component than the rice fields for all the acquired data. The results of this study show that multitemporal observation by full-polarimetric SAR has great potential to be utilized for estimating rice-planted areas and monitoring rice growth.     

A 1-GHz logic circuit family with sense amplifiers

This paper describes a newly developed logic circuit family based on dual-rail bit lines and sense amplifiers that is used extensively in a 1.0-GHz, single-issue, 64-bit PowerPC integer processor, gigahertz unit test site (guTS). The family consists of an incrementor, a count-leading-zero, a rotator, and a read-only memory. Each macro consists of a leaf-cell array, dual-rail bit lines, a row of sense amplifiers, a control block, and peripheral circuits. A common read-out scheme sensing the differential voltage of dual-rail bit lines is used. The hardware was fabricated in a 0.25-μm drawn channel length, six-metal-layer (Al) CMOS technology (1.8-V nominal VDD). Wafer testing was performed using a probe card. The macros were tested cycle by cycle by scanning the input data to the read/write address latches and data latches, and scanning the result out from the output receiving latches. Functional testing was performed on guTS macros at frequencies up to 1.0 GHz at 25°C with nominal VDD (1.1 GHz for the ROM)     

Simulation on contact between the droplet and the slider at head-disk interface based on water-hammer pressure model

To understand the cause of read/write error due to lube accumulation, a model to simulate the slider’s response to the contact impact, which can occur between a lubricant droplet on the disk and a slider, was developed. The contact impact model is based on the water-hammer pressure model with an additional damping force, where the wave-shock pressure is assumed to function as the contact pressure, and the damping force defines the damping characteristics of the impact which are due to the lubricant’s high viscosity and squeeze between the droplet and slider contact area along the slider local velocity direction. The transient contact impact is dependent on lube droplet density, disk velocity, pitch angle of the slider, and contact area between the droplet and the slider. The measured read/write signal jump due to lube pickup can be explained by the simulation results. This modeling and simulation are helpful to us in understanding the read/write signal loss due to a lube droplet at head disk interface.     

Effect of molasses on the production and activity of dye-decolorizing peroxidase from Geotrichum candidum Dec1

The production of dye-decolorizing peroxidase (DyP) was investigated by cultivating Geotrichum candidum Dec1 using molasses as a carbon source. Molasses at concentrations greater than 10 g·l⁻¹ was found to increase the decolorization activity of the culture broth toward dye, reactive blue 5 mainly because the amount of enzyme produced was enhanced. However, complete inhibition of DyP activity by molasses was observed at the concentration of 20 g·l⁻¹, indicating that the inhibitory effect of molasses on the culture broth activity to decolorize the dye was involved. When the culture broth was diluted 25 times, the dye-decolorizing activity was 7 times as much as that of non-diluted culture broth. The molasses fractions separated by gel chromatography (300–400 ml and 400–500 ml fractions) completely inhibited the purified DyP. On the basis of these results, we propose a scheme to control both positive and negative effects of molasses on the dye decolorization process.