Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

1 V 2 GHz CMOS frequency divider

A new frequency divider, called differential injection locking, is proposed. The proposed divider has no transistor stacking to suppress the performance degradation due to supply voltage reduction. It is shown that the proposed frequency divider achieves 2 GHz with 1 V supply voltage and 540 /spl mu/W power consumption.     

Fabrication of MOD-derived YBCO films on [001]LaAlO/sub 3/ and their application to /spl lambda//4 CPW SIR BPFs

Chemically derived epitaxial thin films of YBa/sub 2/Cu/sub 3/O/sub 7-/spl delta// (YBCO) are fabricated on [001]LaAlO/sub 3/ substrates by the metalorganic-deposition (MOD) process, which has advantages of high quality, nonvacuum, low-cost, and large-scale production of high-T/sub c/ superconducting films. The MOD-derived YBCO films have a sharp transition at the critical temperature (90.4 K) and a high-quality film with a surface resistance of 0.13 m/spl Omega/ (30 K, 9.98 GHz) is obtained. As a microwave application, simple and compact bandpass filters (BPFs) using /spl lambda//4 coplanar-waveguide. stepped-impedance resonators are demonstrated on the YBCO films. A two-stage Chebyshev BPF of center frequency of 5.731 GHz, bandwidth of 135 MHz, and insertion loss of 0.29 dB with little input power dependency in a power range less than 10 dBm is realized on the film.     

Neutral poly(3,4-ethylenedioxythiophene-2,5-diyl)s: preparation by organometallic polycondensation and their unique p-doping behavior

Neutral and non-doped poly(3,4-ethylenedioxythiophene), PEDOTh(Ni), and its hexyl derivative, PEDOTh-C₆(Ni), have been prepared by organometallic dehalogenation polycondensation of 2,5-dichloro-3,4-ethylenedioxythiophene and its hexyl derivative with a zerovalent nickel complex. PEDOTh-C₆(Ni) was soluble in organic solvents and ¹H NMR data indicated that it had an M_n of 11,000. MALDI-TOF mass analysis of PEDOTh(Ni) gave M_n and M_w of about 1700 and 2400, respectively. PEDOTh-C₆(Ni) showed a UV-Vis absorption peak at 546 nm in CHCl₃. Electrochemical oxidation of PEDOTh-C₆(Ni) started at about −0.40 V vs Ag⁺/Ag and gave a peak at 0.20 V vs Ag⁺/Ag. Chemical and electrochemical oxidation (or p-doping) of PEDOTh-C₆(Ni), both in solutions and in a solid state, led to weakening of the original π-π^∗ peaks and rise of new peak(s) in a region of 800-1500 nm. The p-doping of PEDOTh-C₆(Ni) caused not only a decrease in the intensity of ¹H NMR signals of the bridging ethylene hydrogens but also a decrease in that of the hexyl side chain, suggesting a strong interaction of the p-dopant with the side chain. NMR data of poly(3-methoxythiophene-2,5-diyl) also supported an assumption that p-doping brings about a severe change in electronic state of the substituent attached to the polythiophene main chain. PEDOTh(Ni) had a density of 1.71 g cm⁻³; the molecular packing mode of PEDOTh(Ni) is discussed based on the density of the polymer and its XRD data.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

A load dispatch method using fractional programming and semidefinite programming

This paper describes a load dispatch method which minimizes power cost—[fuel cost]/[electric output]—for a power system with thermal plants and energy storage facilities. The proposed method employs fractional programming to convert a minimization problem with fractional objective function to a series of quadratic minimization problems, and semidefinite programming to solve converted problems. The method provides the optimum time‐dependent power output/input and storage level of energy storage facilities as well as time‐dependent power output of thermal plants. The method has been applied to a power system with five thermal plants, two energy storage facilities of various performances, and five load demands. The optimum load scheme of four time mesh points is obtained for the thermal plants and energy storage facilities. The fractional programming successfully converges the optimal scheme through a few iterations. The semidefinite programming deals with a variable matrix of 164 dimensions, and 185 inequality constraints. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 49–58, 2002     

Thallium-201 myocardial SPECT in Bland-White-Garland syndrome: two adult patients with inferoposterior perfusion defect

A myocardial 201TI SPECT examination was conducted both prior to and following surgery of two adult patients with an anomalous left coronary artery originating from the pulmonary artery (Bland-White-Garland syndrome). In this syndrome, the anterior wall is usually affected first. Preoperative examination demonstrated an inferoposterior perfusion defect. In both patients, the right coronary artery was markedly dilated, and a significant left-to-right shunt formation was observed. Both patients were diagnosed as possibly having coronary steal syndrome. A prolonged inadequate blood supply to the right coronary region may cause inferoposterior cardiomyopathy. In the postoperative examination, myocardial perfusion markedly improved in one patient whose preoperative SPECT showed redistribution in a delayed scan. Thallium-201 SPECT was therefore found to be useful in assessing both the preoperative and postoperative myocardial perfusion.     

Effects of cytogenin on spontaneous arthritis in MRL/1 mice and on pristane-induced arthritis (PIA) in DBA/1J mice

Cytogenin, 8-hydroxy-3-hydroxymethyl-6-methoxyisocoumarin, has low cytotoxicity on murine and human tumour cells in vitro. It augments or suppresses phagocytosis of macrophages and lymphocyte proliferation. It has been reported that cytogenin has a potent inhibitory effect clinically on adjuvant arthritis in Lewis rats and on type II collagen-induced arthritis in DBA/1J mice. Our experimental findings provide evidence that cytogenin has beneficial effects on spontaneous polyarthritis in MRL/1 mice and pristane-induced arthritis in DBA/1J mice. The results suggest that the mode of the anti-arthritic action of cytogenin is different from those of NSAIDs; although the precise mode of action remains unclear, cytogenin may become an excellent therapeutic agent for rheumatoid arthritis.