Crystal growth and scintillation properties of Ce-doped sodium calcium lutetium complex fluoride

0.1%, 0.5%, 1% and 3% Ce doped scintillation crystals based on NaF-CaF₂-LuF₃ solid solutions were grown from the melt using Micro-Pulling-Down (μ-PD) method. The grown crystals were transparent and their transmittance was approximately 80% for the wavelengths longer than 320 nm. Concerning the scintillation properties, radio-luminescence peaks of the crystals were detected at approximately 330 nm. The light yield of the crystals was also measured using γ-ray (¹³⁷Cs and ²²Na) as the excitation source.     

Electrical and thermal conduction in atomic layer deposition nanobridges down to 7 nm thickness

While the literature is rich with data for the electrical behavior of nanotransistors based on semiconductor nanowires and carbon nanotubes, few data are available for ultrascaled metal interconnects that will be demanded by these devices. Atomic layer deposition (ALD), which uses a sequence of self-limiting surface reactions to achieve high-quality nanolayers, provides an unique opportunity to study the limits of electrical and thermal conduction in metal interconnects. This work measures and interprets the electrical and thermal conductivities of free-standing platinum films of thickness 7.3, 9.8, and 12.1 nm in the temperature range from 50 to 320 K. Conductivity data for the 7.3 nm bridge are reduced by 77.8% (electrical) and 66.3% (thermal) compared to bulk values due to electron scattering at material and grain boundaries. The measurement results indicate that the contribution of phonon conduction is significant in the total thermal conductivity of the ALD films.     

Lipid droplets: size matters

The lipid droplet (LD), an organelle that exists ubiquitously in various organisms, from bacteria to mammals, has attracted much attention from both medical and cell biology fields. The LD in white adipocytes is often treated as the prototype LD, but is rather a special example, considering that its size, intracellular localization and molecular composition are vastly different from those of non-adipocyte LDs. These differences confer distinct properties on adipocyte and non-adipocyte LDs. In this article, we address the current understanding of LDs by discussing the differences between adipocyte and non-adipocyte LDs.     

Severe ethanol stress induces assembly of stress granules in Saccharomyces cerevisiae

Stress granules (SGs) and processing bodies (P bodies) are cytoplasmic domains and play a role in the control of translation and mRNA turnover in mammalian cells subjected to environmental stress. Recent studies have revealed that SGs also form in the budding yeast Saccharomyces cerevisiae in response to glucose depletion and robust heat shock. However, information about the types of stress that cause budding yeast SGs is quite limited. Here we demonstrate that severe ethanol stress generates budding yeast SGs in a manner independent of the phosphorylation of eIF2α. The concentration that generated budding yeast SGs (>10%) was higher than that causing P bodies (>6%), and P bodies were assembled prior to SGs. As well as mammalian SGs, the assembly of budding yeast SGs under ethanol stress was blocked by cycloheximide. On the other hand, the budding yeast SGs caused by ethanol stress contained eIF3c but not eIF3a and eIF3b, although the eIF3 complex is a core constituent of mammalian SGs. Moreover, null mutants (pbp1Δ, pub1Δ and tif4632Δ) with a strong reduction in SG formation did not resume proliferation after the elimination of ethanol stress, indicating that the formation of budding yeast SGs might play a role in sufficient recovery from ethanol stress.     

Evolving graph‐based chromosome by means of variable size genetic network programming with binomial distribution

Genetic network programming (GNP) is a graph‐based evolutionary algorithm with fixed size, which has been proven to solve complicated problems efficiently and effectively. In this paper, variable size genetic network programming (GNPvs) with binomial distribution has been proposed, which will change the size of the individuals and obtain their optimal size during evolution. The proposed method will select the number of nodes to move from one parent GNP to another parent GNP during crossover to implement the new feature of GNP. The probability of selecting the number of nodes to move satisfies a binomial distribution. The proposed method can keep the effectiveness of crossover, improve the performance of GNP, and find the optimal size of the individuals. The well‐known testbed Tileworld is used to show the numerical results in the simulations. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Enzymatic Properties of β‐1,3‐Glucanase from Streptomyces sp Mo.

Streptomyces sp Mo endo‐β‐1,3‐glucanase was found to have hydrolyzing activity toward curdlan and released laminarioligosaccharides selectively. The molecular weight was estimated to be 36000 Da and its N‐terminal amino acid sequence was VTPPDISVTN. The optimal pH was 6 and the enzyme was found to be stable from pH 5 to 8. The optimal temperature was 60 °C and the activity was stable below 50 °C. The enzyme hydrolyzed selectively curdlan containing only β‐1,3 linkages. The enzyme had 89% relative activity toward Laminaria digitata laminarin, which contains a small amount of β‐1,6 linkages compared with curdlan, while Eisenia bicyclis laminarin with a higher amount of β‐1,6‐linkages, was not hydrolyzed. Mo enzyme adsorbed completely on curdlan powder. The enzymatic hydrolysis of curdlan powder resulted in the accumulation of laminaribiose (yield 81.7%). Trisaccharide was inevitably released from the hydrolysis of laminarioligosaccharides with 5 to 7 degrees of polymerization (DP). Although the enzyme cleaved off disaccharide (DP 2) from tetrasaccharide (DP 4), the reaction rate was lower than those of DP 5 to 7. The results indicated that the active site of Mo endo‐β‐1,3‐glucanase can efficiently recognize glucosyl residue chain of greater than DP 5 and hydrolyzes the β‐1,3 linkage between the 3rd and 4th glucosyl residue.     

Clarification of strain limits considering the ratcheting fatigue strength of 316FR steel

The effect of ratcheting on fatigue strength was investigated in order to rationalize the strain limit as a design criterion of commercialized fast reactor systems. Ratcheting fatigue tests were conducted at 550 °C. Duration of the ratchet straining was set for a certain number of strain cycles taking the loading condition of fast reactors into account, and the number of cycles for strain accumulation was defined as the ratchet-expired cycle. Fatigue lives decrease as the accumulated strain by ratcheting increases. Mean stress increased during the ratcheting cycle and its maximum value depended on the accumulated strain and the ratchet-expired cycle. Fatigue life reduction was negligible when the maximum mean stress was less than 25 MPa, corresponding to an accumulated strain of 2.2%. Accumulated strain is limited to 2% in the present design guidelines and this strain limit is considered effective to avoid reducing fatigue life by ratcheting. Microcrack growth behaviors were also investigated in these tests in order to discuss the life reduction mechanisms in ratcheting conditions.     

Lubrication performance of multialkylatedcyclopentane oils for sliding friction of steel under vacuum condition

Sliding friction experiments under vacuum lubricated with additive-free multialkylatedcyclopentane (MAC) were carried out using a ball-on-disc tribometer with 440C stainless steel as the material of the specimen. Antiwear characteristics of additive-free MAC during the steady friction region under vacuum were shown to be better than those of perfluoropolyether (PFPE). However, it was found that the friction coefficient lubricated with the additive-free MAC under vacuum showed an initial seizure-like high friction of approximately 0.2 at the beginning of the test, followed by a steady low friction of approximately 0.1. It was also found in contrast that PFPE did not show the initial seizure-like high friction but maintained a lower friction coefficient than 0.1 throughout the experiment. The initial high wear volume lubricated with the additive-free MAC was found to be related to the initial seizure-like high friction. The tricresylphosphate formulation prevented the initial seizure-like high friction. Copyright © 2007 John Wiley & Sons, Ltd.     

Noncontact measurement of deep tissue absorption coefficient using Spatially Resolved Near‐Infrared Spectroscopy

We examined the influence of probe‐tissue distance on the relationship between the deep tissue absorption coefficient and the spatial profile of light intensity by Monte Carlo simulation and in vivo experiments, using noncontact spatially resolved near‐infrared spectroscopy (SRS). These results suggest that noncontact SRS can be reliably used for noncontact measurement of the absorption coefficient and oxygen saturation of deep tissues. © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.