Quantitative risk assessment of noroviruses in drinking water based on qualitative data in Japan

Noroviruses are one of the major causes of viral gastroenteritis in Japan. A quantitative risk assessment was conducted to evaluate the health risk caused by this virus in drinking water. A Monte Carlo analysis was used to calculate both the probability of infection and the disease burden using disability-adjusted life years (DALYs). The concentration of noroviruses in tap water was estimated based on qualitative data and a most probable number (MPN) method with an assumed Poisson lognormal distribution. This numerical method was evaluated using two sets of available count data of Cryptosporidium: that collected from a river and that found in tap water in Japan. The dose-response relationships for noroviruses were estimated using assumed ID50 (10 or 100). The annual risk was higher than the US-EPA acceptable level (10(-4) [infection/ person-year]) but around the WHO level (10(-6) [DALYs/ person-year]). As suggested by others, since microbial concentrations are generally lognormally distributed, the arithmetic mean was directly related to the annual risk, suggesting that the arithmetic mean is more useful in representing the degree of microbial contamination than the geometric mean.     

Effects of aspect ratio in a transonic shock tube airfoil flow

In the present study, the flow visualizations were performed around the NACA 0012 models which differ in aspect ratios. We discussed the effects of the aspect ratio in the test models. Additionally the unsteady, two-dimensional, compressible Euler equations were solved for the NACA 0012 airfoil. Experiments were performed utilizing the conventional gas driven shock tube as the intermittent transonic wind tunnel. The aspect ratios of the models are about 0.86 and 1.5, respectively. The Mach numbers M 2 are about 0.84. The Reynolds numbers of the present experimental conditions were constant that Re based on chord length is about 4.0×10 5 . The results are as follows: in different aspect ratios, the difference of the shock wave location is confirmed though the Mach number and Reynolds number are same. It indicates the different correction Mach number by the effects of the side wall boundary layer though the nominal Mach number measured the same value. Also, on the difference of shock wave location for the effects of the aspect ratio, the tend of CFD shows the qualitative agreement with the result of an experiment.     

Multiferroics with Spiral Spin Orders

Cross correlation between magnetism and electricity in a solid can host magnetoelectric effects, such as magnetic (electric) induction of polarization (magnetization). A key to attain the gigantic magnetoelectric response is to find the efficient magnetism–electricity coupling mechanisms. Among those, recently the emergence of spontaneous (ferroelectric) polarization in the insulating helimagnet or spiral‐spin structure was unraveled, as mediated by the spin‐exchange and spin–orbit interactions. The sign of the polarization depends on the helicity (spin rotation sense), while the polarization direction itself depends on further details of the mechanism and the underlying lattice symmetry. Here, we describe some prototypical examples of the spiral‐spin multiferroics, which enable some unconventional magnetoelectric control such as the magnetic‐field‐induced change of the polarization direction and magnitude as well as the electric‐field‐induced change of the spin helicity and magnetic domain.     

Bloch Lines Constituting Antiskyrmions Captured via Differential Phase Contrast

Much scientific capital has been directed toward exotic magnetic spin textures called Bloch lines, that is, Néel-type line boundaries within domain walls, because their geometry promises high-density magnetic storage. While predicted to arise in high-anisotropy magnets, bulk soft magnets, and thin films with in-plane magnetization, Bloch lines also constitute magnetic antiskyrmions, that is, topological antiparticles of skyrmions. Most domain walls occur as Bloch-type or Néel-type, in which the magnetization rotates parallel or perpendicular to the domain wall across its profile, respectively. The Bloch lines’ Néel-type rotation and their minute size make them difficult to directly measure. This work utilizes differential phase contrast (DPC) scanning transmission electron microscopy (STEM) to measure the in-plane magnetization of Bloch lines within antiskyrmions emergent in a non-centrosymmetric Heusler magnet with D_2d symmetry, Mn_1.4Pt_0.9Pd_0.1Sn, in addition to Bloch-type skyrmions in an FeGe magnet with B20-type crystal structure to benchmark the DPC technique. Both in-focus measurement and identification of Bloch lines at the antiskyrmion's corners are provided.     

Applicability of machine learning to a crack model in concrete bridges

The growing demand for a more efficient maintenance of concrete bridges requires a model that tracks the deterioration of each bridge based on inspection data. Although it has been expected that machine learning could be applied to this problem, inspection data sparsely distributed over time are not suitable for machine learning in contrast to the continuous big data usually targeted. This study applies machine learning to a regression model of crack formation and propagation using inspection data to confirm the applicability. It includes the selection of the optimal algorithm, development of the model based on a novel methodology, and factor analysis using the model. Accordingly, the model was constructed by Gaussian process regression and it could appropriately extract the differences in the progress of crack damage due to multiple influential factors. The results demonstrate the excellent applicability of machine learning even to sparse data.     

A 34-ns 16-Mb DRAM with controllable voltage down-converter

A high-speed 16-Mb DRAM with high reliability is reported. A multidivided column address decoding scheme and a fully embedded sense-amplifier driving scheme were used to meet the requirements for high speed. A low-power hybrid internal power supply voltage converter with an accelerated life-test function is also proposed and was demonstrated. A novel substrate engineering technology, a retrograded well structure formed by a megaelectronvolt ion-implantation process, provides a simple process sequence and high reliability in terms of soft error and latch-up immunity.<>     

Improvement in luminance,luminous efficiency,driving margin,and operational lifetime of HD PDPs by using discharge deactivation film

Abstract— We have improved our 116‐cm HD PDP in many respects by using DDF formed on MgO around the display line boundaries. The DDF allows an extremely narrow inter‐pixel gap even for a stripe‐rib structure because it prohibits vertical crosstalk discharge. The DDF combined with a stripe‐rib structure results in the best address discharge response. Thus, a very wide driving margin area is achieved, allowing for a high percentage of Xe. The preferable sustain electrode shape follows the CAPABLE DDF style, where the principal discharge portion is separated from the bus via a slim bridge. This cell configuration proved to be excellent in operational life testing with respect to DDF as well as in manufacturing process margin. By employing both a thinner dielectric layer and a TiO₂reflective underlayer for phosphor, the address response is further improved so that Xe15% vol. is available from the viewpoint of the driving margin. Thus, we achieved a white peak luminance of 1220 cd/m² and a luminous efficiency of 2.16 lm/W simultaneously despite of an applied sustain voltage as low as 185 V. We foresee that they will be soon as high as 1400 cd/m² and 2.5 lm/W by modifying the sustain electrode style.     

Photo-induced super-hydrophilic property and photocatalysis on transparent Ti-containing mesoporous silica thin films

The transparent Ti-containing mesoporous silica thin films can be prepared on quartz plate using a spin-coating sol–gel method. The spectroscopic characterization has revealed that the Ti-containing mesoporous silica thin films contain isolated and tetrahedrally-coordinated titanium oxide moieties in the frameworks. Compared with the common mesoporous silica thin films, these Ti-containing mesoporous silica thin films have demonstrated a strong hydrophilic surface property even before UV-irradiation. After UV-light irradiation, the contact angle of water droplet on the Ti-containing mesoporous silica thin films became lower, indicating the appearance of the super-hydrophilic property. Under UV-light irradiation Ti-containing mesoporous silica thin films also exhibited highly selective activity for the photocatalytic oxidation of propylene. The isolated and tetrahedrally-coordinated titanium oxide moieties are responsible for these photo-induced surface reactions.     

Degradation mechanisms of poly(ethylene terephthalate) tire yarn

In order to clarify the fatigue mechanism of PET tire cords in rubber focusing on chemical degradation, hydrolysis in saturated steam atmosphere, ammonolysis in ammonia gas, and the degradation of the cords embedded in rubber have been studied at high temperature conditions. It was found that the strength loss of polyester tire cords in rubber has linear correlation with the amount of chemically induced chain scissions mainly caused by hydrolysis catalyzed by amines.