Giant room-temperature magnetoresistance in single-crystal Fe/MgO/Fe magnetic tunnel junctions

The tunnel magnetoresistance (TMR) effect in magnetic tunnel junctions (MTJs) is the key to developing magnetoresistive random-access-memory (MRAM), magnetic sensors and novel programmable logic devices. Conventional MTJs with an amorphous aluminium oxide tunnel barrier, which have been extensively studied for device applications, exhibit a magnetoresistance ratio up to 70% at room temperature. This low magnetoresistance seriously limits the feasibility of spintronics devices. Here, we report a giant MR ratio up to 180% at room temperature in single-crystal Fe/MgO/Fe MTJs. The origin of this enormous TMR effect is coherent spin-polarized tunnelling, where the symmetry of electron wave functions plays an important role. Moreover, we observed that their tunnel magnetoresistance oscillates as a function of tunnel barrier thickness, indicating that coherency of wave functions is conserved across the tunnel barrier. The coherent TMR effect is a key to making spintronic devices with novel quantum-mechanical functions, and to developing gigabit-scale MRAM.     

Three-dimensional expression of adhesion molecules on the superficial synovial intima of LPS-induced arthritis of the mouse knee analyzed by immuno-SEM

Three-dimensional microlocalization of adhesion molecules, i.e. ICAM-1 (intercellular adhesion molecule), VCAM-1 (vascular adhesion molecule), LFA-1 (lymphocyte function-associated antigen), Mac-1 (macrophage differentiation antigen) and VLA-4 (very late activation antigen), expressed on type-A synoviocyte (macrophage-like cell) and type-B synoviocyte (fibroblast-like cell), were detected by immuno-scanning electron microscopy (SEM) to investigate the immunoreactive microenvironment of the superficial synovial intima in lipopolysaccharide (LPS)-induced arthritis of the mouse knee. Type-B synoviocytes extended rich slender processes from the periphery and constructed a cytoplasmic network, to which ICAM-1 was restricted. VCAM-1 was expressed only in the LPS-stimulated group and was relatively limited to the microvilli of type-B synoviocytes. Type-A synoviocytes were located randomly among the network with a smoother surface and expressed Mac-1 and LFA-1, which were counter-receptors for ICAM-1, and VLA-4 for VCAM-1 on the microvilli or lamellipodia. Three-dimensional microlocalization of adhesion molecules suggests that the network constructed by cytoplasmic processes and microvilli of type-B synoviocytes forms the pathway for the migration or the foothold for the fixation of type-A synoviocytes and takes part in forming an immunoreactive environment in the articular cavity.     

Rate of emulsion polymerization of styrene

In emulsion polymerization, the Smith and Ewart theory gives about two or three times the number of polymer particles obtained by experiment. In this paper, a reaction model is proposed which, from the standpoint of reactor design, can give an adequate explanation of the whole course of an emulsion polymerization of monomer highly insoluble in water. Among other things, the generating process of polymer particles is examined in detail. It is demonstrated experimentally that a new parameter proposed here, which represents the degree of difficulty of monomer initiation in micelles, is indispensable in explaining that process. Also confirmed is that monomer initiation takes place more easily in polymer particles than in micelles. According to the new model, the progress of polymerization, i.e., monomer conversion, the number of the polymer particles, and properties of polymer thus produced can be estimated with satisfactory accuracy. Furthermore, approximate equations are derived for easier estimation.     

Specific Heat of the Surface Layers on the Amorphous Substrate in Solid and Liquid 3He

We have observed an excess heat capacity in liquid and bcc solid ³He at low temperatures. The heat capacity in the normal fluid is found to be the sum of the heat capacity of bulk normal fluid and a temperature-independent heat capacity C due to amorphous solid layers on the silver sinter surface, where C=7.3±6.8 JK^–1m^–2 corresponds to 1.6±0.6 amorphous solid layers. The heat capacity for bcc solid ³He is the sum of the heat capacity originating from the multiple-exchange interaction and a temperature independent heat capacity. The excess heat capacity C=12.1±3.1 JK^–1m^–2 for bcc solid corresponds to 1.9±0.3 amorphous solid layers. Our result indicates that the amorphous solid layers on an amorphous substrate yield a universal C in unit area throughout liquid, solid and adsorbed ³He.     

Retardation‐controlling color filter with two directly stacked retardation layers

Abstract— A polymerizable liquid crystal (PLC), the orientation of which can be frozen, is useful for making retardation layers. In this paper, a new color filter (CF) with retardation‐controlling layers made of PLC is reported. It has a positive A‐plate and a negative C‐plate, both directly stacked on a color‐filter layer. These two retardation layers exhibit good orientation ability, and function well as retarders, even when they are only 1/10 or less as thick as ordinary retardation films. The new CF also has excellent thermal stability. The change in retardation after heat treatment at 200°C for 30 min is around 5%, and there is no observable peeling. A prototype VA‐LCD made with our new CF provides good optical compensation, with the light leakage being extremely low in all azimuthal directions. This technology is very useful for making thin, highly reliable color filters for LCDs, even with other modes.     

High‐efficiency light‐collection optics for lamp‐based projection TV

Abstract— A new light‐collection optics has been developed that enhances the luminance of projection TV which use lamps as the light source. The conventional optical system consists of an elliptical reflector and a flat‐surface front glass, but these systems cannot sufficiently collect the beams coming from the light source, and they cause loss in the coupling with the light pipe. To solve this problem, we devised a new optical system through a structure of an aspherical reflector and an aspherical front glass. This new optical system concentrates the beams coming from the light source to a smaller point which improves the coupling efficiency. Thus, we have successfully increased the luminance of the projection TV by approximately 10%. This paper reports the design principles of the new optical system and the results of a prototype experiment.     

Speech recognition in living rooms: Integrated speech enhancement and recognition system based on spatial,spectral and temporal modeling of sounds

Research on noise robust speech recognition has mainly focused on dealing with relatively stationary noise that may differ from the noise conditions in most living environments. In this paper, we introduce a recognition system that can recognize speech in the presence of multiple rapidly time-varying noise sources as found in a typical family living room. To deal with such severe noise conditions, our recognition system exploits all available information about speech and noise; that is spatial (directional), spectral and temporal information. This is realized with a model-based speech enhancement pre-processor, which consists of two complementary elements, a multi-channel speech–noise separation method that exploits spatial and spectral information, followed by a single channel enhancement algorithm that uses the long-term temporal characteristics of speech obtained from clean speech examples. Moreover, to compensate for any mismatch that may remain between the enhanced speech and the acoustic model, our system employs an adaptation technique that combines conventional maximum likelihood linear regression with the dynamic adaptive compensation of the variance of the Gaussians of the acoustic model. Our proposed system approaches human performance levels by greatly improving the audible quality of speech and substantially improving the keyword recognition accuracy.     

Sensorless vector controlled converter for variable speed wind generation system using an induction generator

This paper proposed two types of speed sensorless converters that can control rotational speed and electric power. One is based on a slip frequency control system. The other is based on a vector control system. The rotational speed of the wind turbine is estimated with the phase voltage and phase current of the induction generator by the adaptive rotor flux observer. The estimated wind turbine rotational speed ω_r^est is used as the feedback of the speed control loop in the converter control system. Also, the estimated rotor flux ?_2d^est is used for the vector control. The simulation results confirm that both of them perform satisfactorily under the speed sensorless operation. The method based on the vector control system generates more electrical energy than does the method based on the slip frequency control system. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 62–75, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20323     

Structure Analysis of Molten Ba–Ge Alloys Using Electrostatic Levitation Technique Combined With High-Energy X-Ray Diffraction

High-energy synchrotron X-ray diffraction experiments were performed for clathrate-forming barium–germanium (Ba–Ge) alloys in the liquid state near the eutectic composition. The accurate structure information of highly reactive melts has been obtained by applying electrostatic levitation technique as a containerless method. The structure information obtained from the reverse Monte Carlo simulation suggests that the short-range ordering between the Ge atoms occurs with the addition of Ba atoms in the liquid Ba–Ge alloys. This can be associated with the formation of the cage-like structure composed of the Ge atoms in the liquid alloys near the eutectic composition.