Crystallization behavior of poly(l-lactic acid)

The crystallization behavior of poly(l-lactic acid) was studied in the range of 80-160 °C. The peak crystallization time (τ_p) was defined and obtained from the crystallization isotherm measured with a differential scanning calorimeter (DSC). Isothermal crystallization temperature (T_c) dependence of log(τ_p) discretely changed at 113 °C (= T_b). The linear growth rate of spherulite, G, was measured with a polarizing microscope. The T_c dependence of G and the size of the spherulite also discretely changed at T_b. Crystal structures for samples isothermally crystallized at temperatures which were higher and lower than T_b were orthorhombic (α-form) and trigonal (β-form), respectively. The discrete change of the crystallization behavior was explained by the formation of different crystal.     

Investigation of hydrogen plasma treatment for reducing defects in silicon quantum dot superlattice structure with amorphous silicon carbide matrix

We investigate the effects of hydrogen plasma treatment (HPT) on the properties of silicon quantum dot superlattice films. Hydrogen introduced in the films efficiently passivates silicon and carbon dangling bonds at a treatment temperature of approximately 400°C. The total dangling bond density decreases from 1.1 × 10¹⁹ cm^-3 to 3.7 × 10¹⁷ cm^-3, which is comparable to the defect density of typical hydrogenated amorphous silicon carbide films. A damaged layer is found to form on the surface by HPT; this layer can be easily removed by reactive ion etching.     

Proposal of cause–effect pattern library for realizing sustainable businesses

Sustainable business design has gained growing interest in recent years. However, it is often difficult to clarify which business activities actually contribute to (or violate) the sustainability of the earth due to high complexity of environmental and economical system of our society. In order to help a business to generate sustainable business ideas handling this complexity in a systematic and comprehensive manner, this paper proposes a method to formulate a wide variety of causalities in our society into a cause–effect pattern library and illustrates how to use it for design and planning of sustainable businesses.     

Thermophysical properties of (U,Y)O2

We prepared polycrystalline pellets of (U,Y)O₂, containing YO_1.5 up to 11 mol.%. We performed indentation tests on the pellets, and evaluated the Young’s modulus and hardness. We measured the heat capacity and the thermal diffusivity, and evaluated the thermal conductivity. We succeeded in evaluating the effect of Y content on the thermophysical properties of (U,Y)O₂. We revealed that the Young’s modulus, hardness, and thermal conductivity of (U,Y)O₂ decreased with increasing the Y content.     

Calculation of neutron cross-sections on copper-63 and -65

Toward the development of the next version of Japanese Evaluated Nuclear Data Library (JENDL) general-purpose file, we calculate neutron cross-sections on ^{63, 65}Cu from 50 keV to 20 MeV, which is the incident energy range above the resolved resonance region in JENDL-4.0. A dispersive optical model potential is adopted with a coupled-channel method for interaction between neutron and ^{63, 65}Cu. Direct, pre-equilibrium, and compound processes are taken into account in the calculation. All cross-sections, differential and double-differential cross-sections are consistently calculated with a single set of model parameters. The calculation results reproduce the measured data very well. In addition, disagreement between the calculated and experimental values seen in an integral test for the ⁶³Cu(n, α)⁶⁰Co reaction is improved by using the cross-section data obtained from the present work.     

Performance enhancement of direct methanol fuel cell using multi‐zone narrow flow fields

New serpentine and spiral flow field configurations were developed to enhance the performance of direct methanol fuel cells (DMFCs). The new configurations are based on two primary concepts, namely, narrowing the flow field and partitioning the total active area of the fuel cell. Three flow channel heights of 0.8, 0.4, and 0.2 mm were investigated in serpentine and spiral flow fields. The main active area is considered a single zone and is partitioned into two‐ and four‐zone designs while maintaining the total inlet mass flow rate of the reactant and oxidant. To determine the performance parameters of the newly proposed designs, a three‐dimensional single‐phase isothermal model was developed, numerically simulated, and validated through experimental measurements. The findings of the current study indicate that a serpentine flow field configuration with a channel height of 0.2 mm and two zones attains an enhancement of the net power density of 37% compared to a conventional single‐zone design with a flow channel height of 0.8 mm. Similarly, for a spiral flow field design, the maximum net power density increased by 26% using a two‐zone configuration with a channel height of 0.2 mm, in comparison to the conventional design of a single‐zone and a flow channel height of 0.8 mm. The newly developed designs utilize the lower height of the flow fields to decrease the dimensions of the fuel cell stacks and reduce the material costs required.     

Open dumping site in Asian developing countries: a potential source of polychlorinated dibenz-p-dioxins and polychlorinated dibenzofurans

Open landfill dumping areas for municipal wastes in Asian developing countries have recently received particular attention with regard to environmental pollution problems. Because of the uncontrolled burning of solid wastes, elevated contamination by various toxic chemicals including dioxins and related compounds in these dumping sites has been anticipated. In this study, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (PCBs) were determined in soils from dumping sites in the Philippines, Cambodia, India, and Vietnam. Residue concentrations of PCDD/Fs and coplanar PCBs in dumping site soils were apparently greater than those in soils collected in agricultural or urban areas far from dumping sites, suggesting that dumping sites are potential sources of PCDD/Fs and related compounds. Observed PCDD/F concentrations in soils from dumping sites in the Philippines and Cambodia were comparable or higher than those reported for dioxin-contaminated locations in the world (e.g., near the municipal waste incinerators and open landfill dumping sites). Homologue profiles of PCDD/Fs in dumping site soils from the Philippines and, to a lesser extent, from Cambodia and India reflected patterns of samples representing typical emissions, while profiles of agricultural or urban soils were similar to those of typical environmental sinks. This result suggests recent formation of PCDD/Fs in dumping site areas and that open dumping sites are a potential source of dioxins in Asian developing countries. Uncontrolled combustions of solid wastes by waste pickers, generation of methane gas, and low-temperature burning can be major factors for the formation of dioxins in dumping sites. Elevated fluxes of PCDD/Fs to soils in dumping sites were encountered in the Philippines, Cambodia, India, and Vietnam-Hanoi, and these levels were higher than those reported for other countries. Considerable loading rates of PCDD/Fs in the dumping sites of these countries were observed, ranging from 20 to 3900 mg/yr (0.12-35 mg TEQ/yr). PCDD/F concentrations in some soil samples from the Philippines, Cambodia, India, and Vietnam-Hanoi exceeded environmental guideline values, suggesting potential health effects on humans and wildlife living near these dumping sites. The estimated intakes of dioxins via soil ingestion and dermal exposure for children were higher than those for adults, suggesting greater risk of dioxin exposure for children in dumping sites. To our knowledge, this is the first comprehensive study on PCDD/Fs contamination in open dumping sites of Asian developing countries. On the basis of the result of this study, we have addressed a new environmental issue that open dumping sites are potential sources of PCDD/Fs and related compounds, and dioxin contamination in dumping sites may become a key environmental problem in developing countries.     

EACLE : Energy-Aware Clustering Scheme with Transmission Power Control for Sensor Networks

In this paper, we propose a new energy efficient clustering scheme with transmission power control named “EACLE” (Energy-Aware CLustering scheme with transmission power control for sEnsor networks) for wireless sensor networks, which are composed of the following three components; “EACLE clustering” is a distributed clustering method by means of transmission power control, “EACLE routing” builds a tree rooted at a sink node and sets the paths from sensor nodes taking energy saving into consideration, and “EACLE transmission timing control” changes the transmission timing with different levels of transmission power to avoid packet collisions and facilitates packet binding. With an indoor wireless channel model which we obtained from channel measurement campaigns in rooms and corridors and an energy consumption model which we obtained from a measurement of a chipset, we performed computer simulations to investigate the performance of EACLE in a realistic environment. Our simulation results indicate that EACLE outperforms a conventional scheme such as EAD (Energy-Aware Data-centric routing) in terms of communication success rate and energy consumption. Furthermore, we fully discuss the impact of transmission power and timing control on the performance of EACLE.     

A novel PCR method for quantification of buckwheat by using a unique internal standard material

A novel quantitative and specific method for detection of buckwheat, a known food allergen, in diverse food materials was developed by using a unique internal standard to compensate for the variability in DNA extraction and amplification efficiencies. The method was based on a real-time PCR targeting the internal transcribed spacer region of Fagopyrum spp. and was designed to detect both cultivated and wild buckwheat, because wild buckwheat might be potentially allergenic. As the internal standard material, ground seeds of statice (Limonium sinuatum) were added to food samples prior to DNA extraction, and the amount of statice DNA measured by real-time PCR was used to standardize the buckwheat content. Statice, an ornamental plant, was chosen as the internal standard material because it was readily available and was inferred to be least likely to be commingled in foods. The specificity of the PCR system was tested against commonly used food materials of plant origin. Quantitative results expressed in buckwheat protein concentrations (mean +/- standard deviation) for various food samples prepared to contain 10 ppm (wt/wt) of buckwheat flour (corresponding to 1.2-microg/g [ppm] buckwheat protein) ranged from 0.7 +/- 0.2 (rice) to 0.9 +/- 0.4 (wheat) and for 100-ppm (wt/wt) samples (12-microg/g [ppm] buckwheat protein) from 7.7 +/- 1.0 (pepper) to 9.8 +/- 0.5 (wheat) microg/g (ppm). The method's accuracy, sensitivity, and specificity were considered sufficient for detection of buckwheat contamination at the level required for compliance with the Japanese Food Allergen Labeling Regulation.     

Multifocal ventricular tachycardia after resuscitation by direct current counter shock in a dog

Cardiac arrest occurred in a male Labrador Retriever dog weighing 27.8 kg during induction to anesthesia. Immediately after the failure of resuscitation by the external cardiac compression, thoracotomy was performed and open chest direct current (DC) counter shocks were applied with routine emergency medications. Then the dog recovered consciousness. Although cardiac rhythm just after resuscitation was sinus tachycardia with paroxysmal supraventricular tachycardia, multifocal ventricular arrhythmia occurred 2 hr after resuscitation. This arrhythmia might be the result from reversible cardiac lesions due to DC counter shock.